Modeling residential sorting effects to understand the impact of the built environment on commute mode choice

This paper presents an examination of the significance of residential sorting or self selection effects in understanding the impacts of the built environment on travel choices. Land use and transportation system attributes are often treated as exogenous variables in models of travel behavior. Such models ignore the potential self selection processes that may be at play wherein households and individuals choose to locate in areas or built environments that are consistent with their lifestyle and transportation preferences, attitudes, and values. In this paper, a simultaneous model of residential location choice and commute mode choice that accounts for both observed and unobserved taste variations that may contribute to residential self selection is estimated on a survey sample extracted from the 2000 San Francisco Bay Area household travel survey. Model results show that both observed and unobserved residential self selection effects do exist; however, even after accounting for these effects, it is found that built environment attributes can indeed significantly impact commute mode choice behavior. The paper concludes with a discussion of the implications of the model findings for policy planning.

Age and cross-cultural comparison of drivers’ cognitive workload and performance in simulated urban driving

Driving demands significant psychomotor attention and requires even more when drivers are engaged in secondary tasks that increase cognitive workload and divert attention. It is well established that age influences driving risk. Less is known about how culture impacts changes in attention. We conducted parallel driving simulations in the US and Korea to measure the extent to which age and culture influence dual-task performance. There were 135 participants divided into two groups: a younger group aged 20∼29, and an older group aged 60∼69. Whereas some differences by culture appeared in absolute control measures, the younger participants showed similar mean velocity and compensatory patterns associated with increased cognitive load in the urban setting; however, the results from the older samples were less similar.     

New procedure to estimate the brake warping in a roller tester

Vehicle systems such as the steering, brakes and suspension greatly influence vehicle safety. Therefore, these systems must be inspected to guarantee that they are functioning correctly and to certify that the vehicle is functioning at a satisfactory safety level. In disc brakes, warping is one of the principal reasons for vibrations and noise, and it contributes to diminished brake efficiency. Currently, the International Motor Vehicle Inspection Committee (CITA) demands disc brake warping inspections occur during periodic motor vehicle inspections (PMVIs); however, the procedure to carry out this inspection is not well defined. In this investigation, the warping phenomenon has been analyzed, and a new inspection procedure is proposed.     

Effect of cetane enhancer on spray and combustion characteristics of compressed ignition type LPG fuel

This research investigated the spray and combustion characteristics of compressed ignition type LPG fuel when a cetane number enhancing additive was applied to a constant volume chamber. Because LPG has a lower cetane number, DTBP and alpha olefin were added to the LPG (100% butane) to enhance the cetane number and viscosity. By adding the cetane enhancer, stable combustion over the wide range of the ambient conditions was possible as well. According to the blending rates of DTBP and alpha olefin, various proportions of LPG blended fuels were obtained. In a constant volume chamber, a high speed digital camera was also employed to visualize the combustion characteristics of LPG fuel. The combustion pressures and heat-release rates of the LPG blends were also compared at various ambient pressures. As the results of measurements of exhaust emissions, CO and HC were reduced considerably, but CO₂ was increased by blending LPG with DTBP and alpha olefin.     

Effect of various LPG supply systems on exhaust particle emission in spark-ignited combustion engine

The particle size distribution and particle number (PN) concentration emitted by internal combustion engine are a subject of significant environmental concern because of their adverse health effects and environmental impact. This subject has recently attracted the attention of the Particle Measurement Programme (PMP). In 2007, the UN-ECE GRPE PMP proposed a new method to measure particle emissions in the diluted exhaust of automotive engines and a regulation limit (<6.0×10¹¹ #/km, number of particles). The specific PN regulation of spark-ignited combustion engine will be regulated starting on September 1, 2014 (EURO 6). In this study, three types of LPG supply systems (a mixer system and a multi-point injection system with gas-phase or liquid-phase LPG fuel) were used for a comparison of the particulate emission characteristics, including the nano-sized particle number density. Each of the three LPG vehicles with various LPG injection systems contained a multi-cylinder engine with same displacement volumes of 2,000 cm³ and a three-way catalytic converter. The test fuel that was used in this study for the spark-ignited combustion engine was n-butane basis LPG fuel, which is primarily used for taxi vehicles in Korea. The characteristics of nano-particle size distribution and number concentration of particle sizes ranging from 20 to 1,000 nm (aerodynamic diameter) that were emitted from the three LPG vehicles with various LPG supply systems were investigated by using a condensation particle counter (CPC), which is recommended by the PMP under both the NEDC and FTP-75 test modes on a chassis dynamometer. The experimental results indicate that the PN emission characteristics that were obtained by the CPC system using the PMP procedure are sufficiently reliable compared to other regulated emissions. Additionally, the sources of PN emissions in ascending order of magnitude are as follows: mixer type, gas-phase LPG injection (LPGi) and liquid-phase LPG injection (LPLi) passenger vehicles. The liquid-phase LPG injection system produced relatively large particle sizes and number concentrations compared to the gaseous system, regardless of the vehicle driving cycle. This phenomenon can be explained by unburned micro-fuel droplets that were generated due to a relatively short homogeneous fuel-air mixture duration in the engine intake manifold. Also the particle number emissions from the LPG vehicle were influenced by the vehicle driving cycle.     

Analytical study to estimate the performance of the Power Shift Drive (PSD) Axle for a forklift

In this study, a new concept for a power delivery system is developed. Power Shift Drive (PSD) Axle vehicle modeling and dynamic movement analysis are performed via simulation. The dynamic vehicle model is constructed from data obtained from the derived equation, considering the specific characteristics of each part. The model is composed of a torque converter, a gear box, a differential, hub reduction and an engine, which is the power source of the 1st forward and reverse PSD-Axle. By unifying the mathematical equations for each component, a mathematical model of the 1st forward gear is derived. The system dynamic model is created using MATLAB/Simulink based on the mathematical model. Simulation is carried out using Simulink to estimate the dynamic behavior of the PSD-Axle. In addition, the dynamo test result is used to verify the model. Finally, a successful model is created. This study will be used to establish the basic conceptual design for the PSD-Axle multi-gear system.     

Hierarchical modeling of semi-active control of a full motorcycle suspension with six degrees of freedoms

Hierarchical control is a new control framework in the vehicle vibration control field. In this paper, a hierarchical modeling method is presented to form a different motorcycle model, compared to the traditional model with six degrees of freedoms (DOF), so as to construct hierarchical modeling control. The whole control framework is composed of a central control, two local controls and two uncontrollable parts. The front and rear wheel systems of a motorcycle are all dealt with by using two independent local 2-DOF systems. The driver and engine act as uncontrollable passive parts. The central control is composed of an algorithm made up of some dynamic equations that harmonize local relations. The vertical and pitch accelerations of the suspension center are treated as central control objects. With the help of Linear Quadratic Gaussian (LQG) algorithms adopted by two local controls, respectively, and Matlab software, some results of the simulation show that hierarchical modeling control requires less CPU time, reduces respond time and improves ride quality.     

Optimum distribution of yaw moment for unified chassis control with limitations on the active front steering angle

This paper describes an optimum distribution method for yaw moment for use with unified chassis control (UCC) with limitations on the active front steering (AFS) angle. Although the UCC has been assumed to have no AFS angle limitation in the literature, a physical limitation exists in real applications. To improve upon the previous method, a new optimum distribution method for yaw moment is proposed that takes this limitation into account. This method derives an optimum longitudinal/lateral force using the Karush-Kuhn-Tucker (KKT) optimality condition, and a simulation is performed to validate the proposed method. The simulation results indicate that the limitation on the AFS angle increases longitudinal braking force and, therefore, reduces the vehicle speed and the side-slip angle.     

Active coolant control strategies in automotive engines

The coolant flow rate in conventional cooling systems in automotive engines is subject to the mechanical water pump speed, and high efficiency in terms of fuel economy and exhaust emission is not possible given this limitation. A new technology must be developed for engine cooling systems. The electronic water pump is used as a substitute for the mechanical water pump in new engine cooling systems. The new cooling system provides more flexible control of the coolant flow rate and engine temperature, which previously relied strongly on engine driving conditions such as load and speed. In this study, the feasibility of two new cooling strategies was investigated using a simulation model that was validated with temperatures measured in a diesel engine. Results revealed that active coolant control using an electronic water pump and valves substantially contributed to a reduction of coolant warm-up time during cold engine starts. Harmful emissions and fuel consumption are expected to decrease as a result of a reduction in warm-up time.     

通过风险管理、计和加固来减少公路桥梁的地震易损性

过去几十年间历次大地震造成的人员和巨大财产损失凸现出减少公路系统地震灾害风险的必要性。结合历次震害经验教训,基于联邦公路署多个地震研究项目的最新成果,表明通过一个整合的风险评估和设计／加固过程,可以更好的达到减少地震灾害的目的。