Estimating salinity to complement observed temperature: 2.Northwestern Atlantic

This paper addresses the problem of estimating salinity for a large region in the Atlantic Ocean containing the Gulf Stream and its recirculation. Together with Part 1 [Thacker, W.C., 2007-this issue. Estimating salinity to complement observed temperature: 1. Gulf of Mexico. Journal of Marine Systems. doi:10.1016/j.jmarsys.2005.06.008.] dealing with the Gulf of Mexico, this reports on the first efforts of a project for developing world-wide capability for estimating salinity to complement expendable-bathythermograph (XBT) data. Such estimates are particularly important for this region, where the strong frontal contrasts render the task of assimilating XBT data into numerical models more sensitive to the treatment of salinity.Differences in salinity's co-variability with temperature and with longitude, latitude, and day-of-year from the northwestern part of the region with the Gulf Stream to the southeastern part more characteristic of the Sargasso sea suggested that the region be partitioned to achieve more accurate salinity estimates. In general, accuracies were better in the southeastern sub-region than in the more highly variable northwestern sub-region with root-mean-square estimation errors of 0.15 psu at 25 dbar and 0.02 psu at 300 dbar as compared with 0.35 psu and 0.50 psu, respectively, but in the southeast there was an unexpected error maximum around 1000 dbar where estimates were slightly less accurate than in the northwest. For pressures greater than 1400 dbar root-mean-square errors in both sub-regions were less than 0.02 psu.     

Analysis of train derailment after hitting the pier of tongling yangtze river bridge combined road with railwayEI北大核心

Research purposes: Precise prediction for mechanical behavior of the bridge under ship collision force is important to assess the analysis of train derailment after hitting the pier. This paper focuses on the Tongling Yangtze River Bridge Combined Road with Railway for ship collision simulation, uses the nonlinear finite element software of ANSYS/LS-DYNA to simulate the ship's bow section of 10000 t and 5000 t class hitting bridge tower column at front and axle to 20° of side in highest navigable water level, conventional navigable water level and the minimum navigable water level. Curves of collision force-period at different working conditions are summarized. On this basis, when the impact load affects as input loads, the displacement and acceleration response can be used by finite element analysis under the collision and study the dynamic response of the bridge caused by a train derailment risk. Research conclusions: (1) The impact force of the bridge is largest when a laden ship is hitting the pier at the highest navigable water level. In the most unfavorable condition, the collision have lardge impact on bridge structure and derailment risk of trains. (2) The transverse acceleration of the girder on the top of 2# pier can reach to 0.922 m/s2, but it does not exceed acceleration excitation limit (1 m/s2) when 3# piers are hitted by the 10000 t ship at the peak load of collision, so the probability of train derailment is minimal. (3) Based on the probability formula of the derailment by simplifying risk criteria, the derailment probability of train is 9×10-5~1.5×10-4 during the ship-bridge collision. (4) The research results can provide the reference for train traffic safety on railway bridge caused by ship collisions.     

提高装船效率保证装船质量

1 装船质量与集装箱码头服务质量 (1)装船质量和装船效率的理解 本文所指的装船质量,是指集装箱码头在装载集装箱时,是否严格按照船方确认的船图装船的优劣程度。与装船效率一样,装船质量是装卸综合能力的重要组成部分。 根据码头装卸特点,集装箱从堆场进箱开始。到存放、装船的过程中,尤其是在确认配船图后所发生积载、发箱、加载的变化,都会导致发到     

IGBT模块在TGV-A高速列车动力车辅助逆变器上的应用

在确保TGV的运营和提高可靠性的前提下,法国国营铁路(SNCF)寻求一种革新、耐用、可靠和经济的器件来更换车载功率设备中的GTO.文章介绍了保持TGV-A动车的车载环境与静止变流器使用IGBT技术的兼容性.重点介绍了在一个30 kVA的辅助逆变器上开展的相应工作,为改造任务制定的技术规范,并在满足热要求的同时实现与现有机械接口的匹配,目的是提高运行的可靠性,优化开关性能,以满足CEM的要求.研究工作成功实现了产品的工业化,这使机车车辆工程技术部门的技术服务能满足更换例如GTO之类的功率器件的需要.     

Modeling design of military equipment operational concepts by MBSE北大核心CSCD

［Objectives］In order to give full play to role of operational concepts in the engineering process of military equipment development, it is necessary to understand and form standardized operational concept documents (OCD), and study the modeling design of OCD in order to implement the transformation of the system engineering process from document-centric to model-centric. ［Methods］This study analyzes the US military's definition of operational concepts and introduces its hierarchical operational concepts, especially the bottom level ConOps or OpsCon, usually as a part of equipment acquisition and requirement engineering. Lessons are then drawn from the relevant theories and standards such as IEEE 29148:2018 and ANSI/AIAA G-043B-2018 of the operational concepts document outline in order to design the specifications of the OCD. Finally, key technologies are studied, including SysML-based OpsCon modeling, UML Profile-based OpsCon framework design and MSDL/C-BML-based operational scenario development.［Result］The results indicate the effectiveness of implementing the modeling design of OCDs. ［Conclusions］In the process of equipment requirement engineering, the results of this study can help to improve the efficiency of equipment requirement demonstration through an ambiguous operational concept model and an engineering environment for all stakeholders of the system. © 2022 Journal of Clinical Hepatology. All rights reserved.     

The economics of railway safety

This paper reviews the statistics and economics of railway safety in Great Britain, the European Union and the United States, together with some results for Finland and Japan. In these countries railway safety has improved over recent decades. That finding applies both to train accidents and to personal accidents such as persons struck by trains. Fatal train collisions and derailments command most attention even though they are infrequent and account for only a small minority of railway fatalities. Great Britain, the EU and the USA formally espouse conventional cost benefit analysis for the appraisal of railway safety measures, using the same valuations for the prevention of casualties as are used in road safety appraisal. However there are often strong institutional, legal and political pressures towards adopting railway safety measures with safety benefit: cost ratios well below 1. The best-documented examples of this are automatic train protection systems, which are discussed in the paper. Apart from trespassers, the largest group of railway fatalities occur at level crossings, which the paper also discusses. Level crossing safety measures would seem to be an appropriate subject for cost benefit analysis, but there are few case-studies in the literature. Over the last few decades, the railways in many countries have been privatised or deregulated with the aim of improving their economic performance. Such changes have the potential to affect safety. The paper reviews evidence of the effects on safety of railway restructuring in Great Britain, Japan and the United State, and finds no evidence that safety deteriorated.     

Contributions to maritime economics—Zenon S. Zannetos,the theory of oil tankship rates

This paper discusses the importance of Zannetos’ 1966 book for the development of maritime economic thought. The main contributions of the book are recounted, and the empirical work in the book is reviewed.

The analysis of the present paper is a citation research on the maritime economics literature that refers to the book. Of the 42 papers in the set, about one-third refers to the book in general. A total of 35 papers refer to one or more elements of the book, with an equal number of references to: (1) the term structure of freight rates; (2) the empirical findings on the form of the supply curve; and (3) on the verification of his results.

The general conclusion of the citation analysis is that, apparently, a number of elements of his work are still very valid for current maritime economics thinking, while maritime economists have disregarded several other elements. The latter seems unjustified for some of the business structure observations that are made in the book, such as the notion that the ship is the firm, and the elasticity of expectations. The former observation is the basis for virtually all empirical work in maritime economics that is based on individual contract data (all freight rate analysis is of this nature), and the second is the basis for the analysis of investment behaviour in shipping, investigations of cyclicality and so on.

Zannetos can definitely be seen as the initiator of the important field of term structure analysis in maritime economics. In addition to this, there are several topics in the 1966 book that are as yet unexplored, and deserve empirical scrutiny.     

State Wetland Protection: A Matter of Context?

Models of integrated management emphasize the role of the surrounding socioeconomic and political environment in influencing management choices for natural resources. In this study, we explore a model that examines the influence of socioeconomic and political variables on the wetland management programs of U.S. states. Logistic regression was used to identify environmental, socioeconomic, and political variables that explained variation in state wetland programs. The likelihood of strong planning, nonregulatory, regulatory, and overall programs increases as the importance of fisheries in the state increases (p < 0.05), but decreases as population density increases (p < 0.15). Furthermore, there is an increasing likelihood of stronger regulatory and overall programs as environmental group activity and industry importance increases (p < 0.05). These findings provide empirical evidence to support the contention that management approaches used in one state often must be adapted to fit the realities of another given state.     

Historic Monuments Threatened by Coastal Hazards at Boca do Rio,Algarve, Portugal

The coastal stretch of Boca do Rio, western Algarve, Portugal, is experiencing shoreline retreat. Roman ruins are located along the beach section of the coast, and a 17th-century fort is positioned over the cliff section. Both historic monuments are being destroyed by erosion but need to be protected due to their heritage status. Aerial photograph analysis was used to define the evolution of the coast for the period 1945–2001. Shoreline retreat of 0.3 m/year was measured for the sandy coast and 14 mass movements in the cliff face were identified. Considering the rate and style of shoreline evolution, several types of management scenario were evaluated, with the favored measures being the removal of the Roman ruins to a museum and the relocation of the fort inland.     

Formulating and solving the network design problem by decomposition

The optimal transportation network design problem is formulated as a convex nonlinear programming problem and a solution method based on standard traffic assignment algorithms is presented. The technique can deal with network improvements which introduce new links, which increase the capacity of existing links, or which decrease the free-flow (uncongested) travel time on existing links (with or without simultaneously increasing link capacity). Preliminary computational experience with the method demonstrates that it is capable of solving very large problems with reasonable amounts of computer time.