Neuro-Fuzzy Control of a Tracked Vehicle Featuring Semi-Active Electro-Rheological Suspension Units

This paper presents vibration control of a tracked vehicle installed with electro-rheological suspension units (ERSU). As a first step, an in-arm type ERSU is designed, and its spring and damping characteristics are evaluated with respect to the intensity of electric fields. Subsequently, a 16 degree-of-freedom model for a tracked vehicle equipped with the proposed ERSU is established followed by the formulation of a neuro-fuzzy controller. This controller takes account for both ride quality and steering stability by adopting a weighting parameter between two performance requirements. The parameter is appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the vertical speed of the body and the rotational angular speed of the wheel. Control performances to isolate unwanted vibration from bump and random road excitations are evaluated through computer simulations. In addition, maximum speed of the vehicle with 6 Watt power absorption is investigated with respect to the road roughness.     

Simulation Tools, Modelling and Identification, for an Automotive Shock Absorber in the Context of Vehicle Dynamics

For purpose of simulation of vehicle dynamics, a physical model of an automotive shock absorber has been developed and implemented in several software packages for multibody simulations. In the present paper, the damper model structure is shortly elaborated together with some measurement and estimation techniques to retrieve the model parameters, possibly from dynamometer measurements only. These techniques are illustrated on a shock absorber normally used on the front suspension of a BMW series 7.     

Fatigue damage calculation for oil tanker and container ship structures

The fatigue behaviour of longitudinal stiffeners of oil tankers and container ships, subjected to dynamic loads, is analysed. The following dynamic load components are considered: hull girder vertical wave bending moment, alone and combined with the horizontal wave bending moment, hydrodynamic pressure and inertial forces caused by cargo acceleration.

The spectral method was selected to calculate the fatigue damage, based on S—N curves and Miner's rule. Following this approach, the fatigue damage may be calculated as a function of a stress parameter Ω_p, which represents the cumulative effect of wave induced loads in the unit of time and incorporates the combined effects of stress level and its occurring frequency.

Simple formulas for Ω_p of oil tankers and container ships are given, obtained from the results of hydrodynamic analyses performed on several ships, in different wave environments.

Several examples show the applicability of the methods to real ship structures. The method, however, still needs to be calibrated because of the simplifying hypotheses introduced in the loading conditions.     

REGULATION OF PRODUCTION OF PARATHYROID HORMONE－RELATED PEPTIDE （PTHrP） AND EXPRESSION OF ITS mRNA IN A HUMANLIVER－DERIVED CE

ＲＥＧＵＬＡＴＩＯＮＯＦＰＲＯＤＵＣＴＩＯＮＯＦＰＡＲＡＴＨＹＲＯＩＤＨＯＲＭＯＮＥ－ＲＥＬＡＴＥＤＰＥＰＴＩＤＥ（ＰＴＨｒＰ）ＡＮＤＥＸＰＲＥＳＳＩＯＮＯＦＩＴＳｍＲＮＡＩＮＡＨＵＭＡＮＬＩＶＥＲ－ＤＥＲＩＶＥＤＣＥＬＬＬＩＮＥＬｉＨｕｓｏｎｇ；Ｐ...     

Flutter and Divergence Instabilities in Systems of Railway Wheelsets with Semi-rigid Articulation

For railway vehicles having coned wheels mounted on solid axles there is, in general, a conflict between stability of lateral deviations from the motion along the track and ability to steer round curves. However, certain configurations of three-axle vehicle can satisfy the requirement of perfect curving and for certain values of the system parameters are dynamically stable. In the case where three wheelsets have semi-rigid articulation and either the distribution of conicity amongst the wheelsets or the position of the articulation joint are varied, it is shown that both flutter and divergence instabilities can occur at low speeds, in contrast to the more common dynamic instabilities of other forms of railway vehicle which are driven by the inertia forces.     

Vehicle Energy Dissipation Due to Road Roughness

Road roughness and surface texture are known to affect tire rolling resistance; however, little emphasis has been placed on the consequent changes in total vehicle energy dissipation due to road roughness. Thus, tire rolling resistance, in isolation from vehicle contributed losses such as dissipation in the suspension, appears to be a weakness in present evaluation procedures as they relate to fuel economy and pollution level testing: Recent work by Funfsinn and Korst has shown that substantial and measurable increases in energy losses occur for vehicles traveling on rough roads. The present investigation uses vehicle axle accelerations as a means of examining various road surfaces. Correlation with computer simulations has allowed the development of a deterministic road roughness model which permits the prediction of energy dissipation in both the tire and suspension as functions of road roughness, tire pressure, and vehicle speed. Comparison to the experiments of Korst and Funfsinn results in good agreement and shows that total rolling loss increases of up to 20 percent compared to ideal smooth roads are possible. The aerodynamic drag coefficient is also found to increase while driving on rough roads.     

An application of variance reduction techniques in freeway simulation

Computer simulation models are used in a variety of applications in transportation engineering and have become a prime aid in decision making. The applications range from evaluating traffic control strategies for single intersections to such complex decision processes as evaluating the impact of removing toll facilities at the George Washington Bridge in New York City. While it is widely accepted that simulation offers an unmatchable capability of evaluating alternate control policies, the high variance of the output variable presents a critical problem in such comparative analyses. The simulation models with high output variance must be run longer or replicated many times to achieve a desired precision level, and that corresponds to increased cost of computer resources. This paper describes and illustrates the application of variance reduction concepts that can improve the reliability and efficiency of the simulation experimental process by taking advantage of the simulation model structure. The two variance reduction concepts (common random numbers and antithetic variates) reduce the variance of the output variable by replacing the original sampling procedure with a new procedure that yields the same expected value but with a smaller variance. The application of the variance reduction concept was illustrated using results from experiments with a freeway simulation model. The results indicate that both common random numbers and antithetic variates sampling procedures appreciably reduce the variance of the simulation output measure.