Impact of phytoplankton community size on a linked global ocean optical and ecosystem model

We isolated the effect phytoplankton cell size has on varying remote sensing reflectance spectra (R_rs(λ)) in the presence of optically active constituents by using optical and radiative transfer models linked in an offline diagnostic calculation to a global biogeochemical/ecosystem/circulation model with explicit phytoplankton size classes. Two case studies were carried out, each with several scenarios to isolate the effects of chlorophyll concentration, phytoplankton cell size, and size-varying phytoplankton absorption on R_rs(λ). The goal of the study was to determine the relative contribution of phytoplankton cell size and chlorophyll to overall R_rs(λ) and to understand where a standard band ratio algorithm (OC4) may under/overestimate chlorophyll due to R_rs(λ) being significantly affected by phytoplankton size. Phytoplankton cell size was found to contribute secondarily to R_rs(λ) variability and to amplify or dampen the seasonal cycle in R_rs(λ), driven by chlorophyll. Size and chlorophyll were found to change in phase at low to mid-latitudes, but were anti-correlated or poorly correlated at high latitudes. Phytoplankton size effects increased model calculated R_rs(443) in the subtropical ocean during local spring through early fall months in both hemispheres and decreased R_rs(443) in the Northern Hemisphere high latitude regions during local summer to fall months. This study attempts to tease apart when/where variability about the OC4 relationship may be associated with cell size variability. The OC4 algorithm may underestimate [Chl] when the fraction of microplankton is elevated, which occurs in the model simulations during local spring/summer months at high latitudes in both hemispheres.     

Biogeography-based combinatorial strategy for efficient autonomous underwater vehicle motion planning and task-time management

Autonomous Underwater Vehicles (AUVs) are capable of spending long periods of time for carrying out various underwater missions and marine tasks. In this paper, a novel conflict-free motion planning framework is introduced to enhance underwater vehicle’s mission performance by completing maximum number of highest priority tasks in a limited time through a large scale waypoint cluttered operating field, and ensuring safe deployment during the mission. The proposed combinatorial route-path planner model takes the advantages of the Biogeography-Based Optimization (BBO) algorithm toward satisfying objectives of both higher-lower level motion planners and guarantees maximization of the mission productivity for a single vehicle operation. The performance of the model is investigated under different scenarios including the particular cost constraints in time-varying operating fields. To show the reliability of the proposed model, performance of each motion planner assessed separately and then statistical analysis is undertaken to evaluate the total performance of the entire model. The simulation results indicate the stability of the contributed model and its feasible application for real experiments.     

Comparing operator and users costs of light rail, heavy rail and bus rapid transit over a radial public transport network

A model to compare three alternative forms of public transport - light rail, heavy rail and bus rapid transit - is developed for an urban network with radial lines emanating from the borders to the city centre. The theoretical framework assumes an operation aimed at minimising the total cost associated with public transport service provision, which encompasses both operator and users costs. The decision variables are the number of lines (network density) and the frequency per period for each mode. This approach has no prejudices a priori in respect of whether a specified delivery scenario is aligned with existing modal reputation. Rather, we establish the conditions under which a specific transit mode should be preferred to another in terms of the operator (supply) and user (demand) side offerings. The model is applied using data from Australian cities, suggesting that in most of the scenarios analysed a high standard bus service is the most cost-effective mode, because it provides lower operator costs (infrastructure, rolling stock and operating cost), access time costs (due to a larger number of lines) and waiting time cost (due to larger frequencies of operation). A rail mode, such as light rail or heavy rail, may have a lower total cost only if it is able to run faster than bus rapid transit, and the difference in speed is enough to outweigh the bus advantage on operator cost and access and waiting times.     

Damage detection in offshore structures using neural networks

This paper discusses the damage detection in offshore jacket platforms subjected to random loads using a combined method of random decrement signature and neural networks. The random decrement technique is used to extract the free decay of the structure from its online response while the structure is in service. The free decay and its time derivative are used as input for a neural network. The output of the neural network is used as an index for damage detection. It has been shown that function N is effective in damage detection in the members of an offshore structure. Experimental studies conducted on a reduced model for a real jacket structure with geometrical scale of 1:30 are used. The applied loads were random loads. Two different load spectra were used: White noise, and Pierson-Moskowitz.     

Further study on the ultimate strength analysis of spherical pressure hulls

From a comparative study it is concluded that current design rules for the spherical pressure hull of manned submersible need to be updated and unified. In this paper, a series of spherical pressure hulls are calculated by nonlinear FEM. Based on these numerical results, the influence of critical arch length and the relationship of ultimate strength with t/R and structural imperfection are studied. Finally, empirical formulae for the ultimate strength of the titanium alloy spherical pressure hull of deep manned submersible based on numerical computations are given. The formulae can be used as the core equations to update current design rules.     

中国试图通过税务优惠提高洋山港货运量

中国计划向利用国内港口转运货物的出口企业提供税务激励,以从国外竞争对手那里吸引更多货运量.例如,从青岛、武汉起程的出口船只如果利用上海洋山港转运,将可获得退税.这一计划由国务院实施,将针对干散货船和集装箱船展开,以帮助国内港口与邻近的航运中心竞争.     

���߽�ͨ���ź��Ż�����:�ع���ǰհ

概括地回顾了一些关于离线(或脱机)交通信号灯优化设计的方法.其中包括用于在孤立交叉口的单点和区域性的联动控制系统.离线方法在设计时一般利用已有调查出来的交通数据作为固定的输入资料，这个跟实时设计方法所要求的从感应器即时检浏出来的情况作为设计依据是有本质上的区别.但一般沿用的信号配时设计方法都需要依靠已刻在行车线道上(允许通行)的方向指示标志为设计基础，但这个方向指示在确定后在整个优化过程中是维持不变的，这就限制了交通流量在线道上的分布，从而大大减低配时的灵活性，在这样情况下优化出来的结果肯定不会是最好的.直至近期，以行车线道为基本单位的配时设计方法(英文名称为Lane-based method;中文可称为线道法)发展起来.这个方法是由传统的Phase-based method(相位法)所演变出来的.线道法不但包含所有相位法的特点，而且更能为原本受约束的线道和配时设计进行全面优化.线道法可在单点交叉口和区域性的联动控制系统上应用.文末提出一些未来研究发展的新方向.     

机车轴悬式电机悬挂齿轮副变形的三维有限元分析

本文用三维有限元方法对东风_4型内燃机车的整个牵引电机传动系统进行了计算。其计算模型利用假想的二力杆连接齿轮副的啮合点,人为地造成了均匀传递啮合力的力学条件,从而计算出了合理的齿轮修形量。     

Examining the influence of firm performance on business risk-taking and the mediation effect of scale of operations in the container terminal industry

Container shipping and its related service sectors help accelerate globalization of the world economy. This industry has been experiencing rapid growth, prompting container terminal operators to increase their handling capacity in response. Providing container terminal services requires substantial capital investment in physical assets such as cargo handling facilities and information systems. On the other hand, operating container terminals is a long-term investment that typically spans several business cycles. Hence prudent asset management using appropriate tools is critical for container terminal operators to sustain their businesses. Generally, due to risk-adverseness, investors are unwilling to take more risk in their investment unless they can reap a higher return. Contrary to this argument, this study finds no direct influence of better firm performance as a proxy of higher return on business risk-taking by container terminal operators. Instead, scale of operations is positively associated with business risk-taking, suggesting that container terminal operators with a larger scale of operations are willing to take more business risk.     

Service-oriented computing and model-driven development as enablers of port information systems: an integrated view

Port information management is considered a critical instrument towards enabling international transport and trade; thus, various forms of Port Information Systems (PORTIS) have been developed today, namely Port Community Systems, Terminal Operating Systems and Single Window systems. In Europe, the nautical information system SafeSeaNet is viewed as an important e-infrastructure. PORTIS systems are expected to evolve into next-generation technological platforms in order to offer a fully integrated digital environment to a multitude of maritime business actors and public authorities towards more efficient, safe and environment-aware transport and trade infrastructures and services. We propose service-oriented computing and model-driven development techniques as a robust PORTIS modelling and development approach. We present a reference model of PORTIS and a particular enabling methodological and technological framework. The proposed approach has been tested in a maritime single-window case.