Changing ownership structures in the Dutch fleet

The new Dutch shipping policy has given rise to high expectation and curiosity in the world of shipping. This, together with the obvious difficulties of an ex-post study of the effectiveness of such innovative policy, has prompted the authors to take an interest in attempting to investigate changes in ownership of the Dutch fleet 2 years after the new policy has been introduced. To do this, a rather new concept of ‘flagging out’ has been adopted, which is interpreted as a process leading to different degrees of ‘foreignness’ in a shipping operation. In this paper, a method to structure is presented, and ownership information, and changes in it are presented, that are essentially based on the theory of stochastic processes. The data used is the Dutch fleet data, which includes information on the nationality of the flag, parent ownership and management over the period 1994–1998. The results yield interesting insights in the shifts in the ownership and operational structure of shipping companies induced by the new policy. In particular, they allow one to establish the origin of new vessels, in which stage of ownership/operation it is most likely that shifts occur, and to determine the relationship between the different stages of the ‘flagging out’ process. These results, thus, enable an evaluation of the areas in which the policy can be expected to yield results.     

Contracting in highway maintenance and rehabilitation: Are spatial effects important?

Highway agencies around the world strive to improve practices for infrastructure maintenance and rehabilitation, using project delivery policies that range from total ‘in-house’ responsibility to complete privatization, with a number of flexible contracting policies such as performance-based contracting, variants of design-build-maintain, and lane rentals among others between these two extremes. In this paper, we present a methodology that duly accounts for underlying spatial effects and estimates the expected cost savings of innovative contracting policies for highway maintenance and rehabilitation relative to in-house execution of these activities. Spatial econometric modeling is used to analyze highway contract data from 49 countries. We also investigate the marginal effects of key explanatory variables on contract cost savings using spatial multipliers. Our findings show that there are significant relationships between cost savings and contract characteristics, and that there is an apparent direct relationship between the average cost savings of contracts in a country and contract average cost savings and contract sizes in neighboring countries.     

Red-light cameras at intersections: Estimating preferences using a stated choice model

Red-light cameras placed at intersections have the potential to increase safety, but they are often viewed as an invasion of privacy. Preferences for these cameras were explored using a stated choice model that presents key attributes of camera placements. Stated choice models involve careful experimental design, akin to experimental control in laboratory settings. A variety of design approaches were used, settling on a composition of the choice sets people face in the survey. To illustrate the approach, an internet survey was used with a convenience sample containing a high percentage of college students. The results show that while not the case independently, as the number of cameras and fines for violators are simultaneously increased, the preferences for one particular red light cameras program are likely to improve.     

天然海水中15CDV6/MDN138及15CDV6/MDN250合金的电流相互作用（英文）

The galvanic corrosion behavior of the metal combinations 15 CDV6/MDN138 and 15 CDV6/MDN250, with 1:1 area ratio, has been studied in natural seawater using the open well facility of CECRI's Offshore Platform at Tuticorin for a year. The open circuit potentials of MDN138, MDN250, and 15 CDV6 of the individual metal, the galvanic potential and galvanic current of the couples 15 CDV6/MDN138 and 15 CDV6/MDN250, were periodically monitored throughout the study period. The calcareous deposits on MDN138 and MDN250 in galvanic contact with 15 CDV6 were analyzed using XRD. The electrochemical behavior of MDN138, MDN250, and 15 CDV6 in seawater was studied using an electrochemical work station. The surface characteristics of MDN138 and MDN250 in galvanic contact with 15 CDV6 have been examined with a scanning electron microscope. The results of the study reveal that the galvanic protection offered by15 CDV6 to MDN250 and MDN138 in natural seawater amounts to 93% and 98%, respectively, implying that the galvanic protection offered by 15 CDV6 is continuous and effective, which has been further evinced from the adherent nature of the calcareous deposit film comprising compounds such as CaCO_3(calcite, aragonite, and vaterite), MgCO_3(magnesite),Mg(OH)_2(brucite), and MgO(brucite).     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.     

Model-based design of a variable nozzle turbocharger controller

Variable Nozzle Turbocharger (VNT) was invented to solve the problem of matching an ordinary turbocharger with an engine. VNT can harness exhaust energy more efficiently, enhance intake airflow response and reduce engine emissions, especially during transient operating conditions. The difficulty of VNT control lies in how to regulate the position of the nozzle at different engine working conditions. The control strategy designed in this study is a combination of a closed-loop feedback controller and an open-loop feed-forward controller. The gain-scheduled proportional-integral-derivative (PID) controller was implemented as the feedback controller to overcome the nonlinear characteristic. As it is difficult to tune the parameters of the gain-scheduled PID controller on an engine test bench, system identification was used to identify the plant model properties at different working points for a WP10 diesel engine on the test bench. The PID controller parameters were calculated based on the identified first-order-plus-dead-time (FOPDT) plant model. The joint simulation of the controller and the plant model was performed in Matlab/Simulink. The time-domain and frequency-domain performances of the entire system were evaluated. The designed VNT control system was verified with engine tests. The results indicated that the real boosting pressure traced the target boosting pressure well at different working conditions.     

Piston-temperature measuring system using electromagnetic induction with verification by a telemetry system

The development of an inner-piston-chamber temperature measurement system is a necessary step in engine development or when solving other fundamental problems related to automotive engines. There are various pre-existing measurement methods available, e.g., the linkage method, piston telemetry, templog, and the electromagnetic induction method. In this study, we first redesigned the coil sensor used in the electromagnetic induction method using PEEK and then used Taguchi methods to reduce the number of experiments in the development process and finally utilized piston telemetry via Bluetooth to verify the precision and accuracy of the redesigned PEEK coil sensor and electromagnetic induction method. The results displayed a reproducibility within 0.5 degrees and an accuracy within 2 degrees Celsius.     

Parameter identification for a LuGre model based on steady-state tire conditions

The purpose of this study was to effectively identify parameters for a LuGre friction model based on experimental measures. In earlier work related to this study (Yang et al., 2009), which was based on the characters of polygonal wear (Sueoka and Ryu, 1997), we showed a frictional vibration model for a mass on a moving belt. This model reflected lateral vibrations caused by velocity and toe-in angle. An important aspect of the present study is the improved friction model. A previous friction model, which divided the process into four parts, expressed the sable excited vibration well but failed to reflect the hysteresis loop change when vehicles accelerated or decelerated continuously. A LuGre friction model can solve this problem, but several model parameters must be obtained experimentally. We measured contact width and length of tires as vertical pressure changed; this provided a theoretical basis for apparent stiffness of a unit of tire tread. Based on tire data from Bakker E’s article in a SAE paper from 1987, we identified the Stribeck exponent and Stribeck velocity in LuGre. Then, the results were implemented in a vibration system that verified the rationality of the data.