The jurisdictional challenges to the prosecution of piracy cases in Kenya: mixed fortunes for a perfect model in the global war against piracy

Since 2008 Kenya has distinguished itself in the global war against piracy by undertaking prosecutions in the national courts of suspected pirates arrested in the high seas and handed over by navies of leading maritime nations under bilateral agreements (MOUs) entered into between Kenya and these leading maritime nations. As of July 2011, Kenya had over 20 convicted pirates serving jail terms ranging between 7 and 20 years and over 100 suspected pirates awaiting trial in national courts. This is the largest number of suspected pirates held and tried in any one state at any given time in modern history. To achieve this, Kenya had to effect far reaching changes in the law. In the initial stages, suspected pirates were charged under Kenya’s Penal Code (Cap 63 Laws of Kenya). However, the high court in the case of Re Mohamud Mohamed Dashi and eight others [2010] eKLR, ruled that Kenya had no jurisdiction to try suspected pirates under that law. In September 2009, Kenya passed a new law (the Merchant Shipping Act), which not only defined more comprehensively and extensively the offence of piracy, but also extended the jurisdiction of Kenyan courts to try piracy committed by non-nationals. Though the law gives Kenya a very broad jurisdiction to try suspected pirates, the process is still fraught with challenges due to lack of financial and human resources. In the case of Republic vs Hassan Jama Haleys Alias Hassan Jamal and five others [2010] eKLR, the court commented thus:

“… I must note that the ‘piracy trials’ have presented a unique challenge to the Kenyan legal system. We cannot ignore the fact that these are suspects who having been arrested by foreign naval forces on the High Seas are brought to Kenya for trial. They are strangers in the country, do not understand the legal system, may not know what their rights are and do not understand the language… the Kenyan Government and the International partners supporting these trials put in place a system to provide free legal representation for the suspects…”     

基于模糊集对分析的船舶能耗评估

针对船舶能耗评价中影响因素具有模糊性、不确定性和关联性等特点,在确定船舶能耗评价因素集的基础上,利用模糊集对分析方法将待评估船舶的能耗情况与理想情况组成一对集对,计算各级评价指标的同一度、对立度和差异度得到集对联系度。根据船舶能耗系统的联系度进行同异反态势评判,贴近度和不确定性分析,从而得到船舶能耗系统的综合评估。实例分析验证了将模糊集对分析应用于船舶能耗评估的有效性。     

A finite pointset method for the numerical simulation of free surface flow around a ship

In this paper, we present a Finite pointset method (FPM) for the numerical simulation of free surface flow around a ship in calm water. It is a Lagrangian and meshless particle scheme which is applied to the projection method for the incompressible governing equations. This requires the solution of Poisson problems in each time step, so a moving least squares (MLS) interpolants is used for the spatial derivatives in order to discretize the Poisson equation with pressure-Dirichlet condition of free surface flow in meshless structure. Meanwhile, an additional problem of the periodic particle locations redistribution in the present approach is still handled by MLS interpolants. With the proposed FPM technique, problems associated with the free surface flow around a ship are circumvented. A verification of numerical modeling is made using the Wigley hull and the validity of the proposed methodology is examined by comparing the detail of wave profile and wave-making resistance with Series 60 model. The results demonstrate that FPM is able to perform efficient and stable simulations of free surface flow around a ship.     

A new method for absolute datum transfer in seafloor control network measurement

To decrease the time consumption and the labor intensity in the absolute datum transfer of traditional seafloor control network measurement, a new method, namely sailing-circle positioning method, is put forward in this paper. First, the traditional intersection positioning model is improved by considering the equivalent sound velocity profile error as an unknown parameter in the adjustment model. Second, the effect of geometric dilution of precision (GDOP) on positioning accuracy is analyzed. By seeking for the minimum of GDOP, it is concluded that the absolute datum transfer can achieve the highest accuracy in the condition of sailing along a circle relative to other sailing paths. Moreover, the optimal radius of the circle for the accurate datum transfer is also given out. Besides, the correlation between the accuracy of datum transfer and the sound velocity error in this method is analyzed. Finally, the new method was tested and verified by the experiments in Songhua lake with the water depth of 60 m and in South China sea with the water depth of 2000 m, respectively. These experiment results show that the new method can improve the accuracy and efficiency of traditional datum transfer method significantly.     

Advantages of twin rudder system with asymmetric wing section aside a propeller

This study presents a new twin rudder system with asymmetric wing section, aside a propeller, as a new category energy saving device (ESD) for ships. The energy saving principle of the new ESD, which is called “Gate rudder”, is described and its applicability on a large bulk carrier is explored using experimental and numerical methods. The study makes emphasis on the cost-effectiveness of the proposed ESD and presents a potential energy saving up to 7–8 % with the new device as well as an attractive return investment in 0.37–0.9 year. These estimations are based on the conventional powering methods, whereas the accuracy of the ESD design method is confirmed by model test measurements.     

Oriented review to potential simulator for faults modeling in diesel engine

This paper presents a literature review on most of the faults and their models that are considered on a diesel engine. Several faults that may be produced on diesel engine have been analyzed, classified, modeled, and their influences on the global system have been shown. Thus, this paper aims to prepare an important data base on diesel engine faults which may help researchers to develop precise strategies on diesel engine fault diagnosis and prognosis, and also it helps in the development of diesel engine simulators aiming to study the behavior of the diesel engine in the presence of faults. Different fault models such as analytical, empirical, degradation models which may be represented as function of time or as function of the number of cycles, data driven models such as neural network models, or simply constant are presented and analyzed. The global overall models for diesel engine integrating faults are expressed. And finally, the use of these models with the most common failure density distribution functions is proposed giving a more realistic approach to our study.     

New procedure for the analysis of speed trial results,with special attention to the correction of tidal current effect

Almost all the existing analysis methods of speed trial results were proposed before 1970s, and the actual analysis procedures are very old-fashioned with instructions like “plot the results on a chart and draw a smooth mean line”, “read a value from the mean line” and so on. Such instructions not only show up the analysis procedures old-fashioned, but also make them very ambiguous and unclear. They should be up-dated to a method which is clear not only in logic but also in calculation procedure, and also fits the present computing technology. At first, the author reviewed the major analysis methods and concluded that the logic of the up-dated analysis procedure can be composed of the logics of the existing ones. Then, the analysis procedure is composed of three stages; namely (1) correction of power and propeller revolution to the ones corresponding to no air condition, (2) correction of tidal current effect, and (3) correction of power and propeller revolution to the ones corresponding to no wind condition. For the stages (1) and (3), there seems to be no big issue except the estimation of the amount of environmentally added resistance in the stage (1). Then, the author focused on the correction of tidal current effect in this paper. For the correction of tidal current effect, the author considers the essential points for the up-date are in the direction of finding out appropriate functions for the variation of tidal current velocity and the ship speed through the water. Then, he investigated to find out such functions and made his proposal. Finally, the applicability of the new procedure is assessed by the analysis of simulated speed trial results of a VLCC.     

Large-eddy simulation of cross-flow around ship sections

The present work is motivated by phenomena occurring in the flow field around ship-like bodies with an incoming lateral flow (cross-flow, 90 ° drift angle). Three-dimensional unsteady flows around different ship sections are investigated by using computational fluid dynamic (CFD) tools with large-eddy simulation (LES) subgrid-scale turbulence model. The simulation results are compared to measurements at several Reynolds numbers in the 90–200,000 range. Focus in our investigation is on the characterization of the motion of vortex structures generated by the separated flow. Another target in the study is to obtain better knowledge of the hydrodynamic forces acting on the sections. Computed pressure and drag coefficients are compared with experimental measurements. The comparison between simulations and measurements shows that an LES model can predict the flow field around ship sections in detail and the hydrodynamic forces acting on the sections.     

Motion response prediction by hybrid panel-stick models for a semi-submersible with bracings

A diffraction-radiation analysis is usually required when the hydrodynamic interactions between structural members occur in short waves. For bracings or small cylindrical members, which play important roles in the vicinity of the natural frequency of a floating platform, special care should be taken into account for the effect of viscous damping. Two hybrid panel-stick models are, therefore, developed, through the combination of the standard diffraction-radiation method and the Morison’s formulae, considering the effect of small members differently. The fluid velocity is obtained directly by the panel model. The viscous fluid force is calculated for individual members by the stick model. A semi-submersible type platform with a number of fine cylindrical structures, which is designed as a floating foundation for multiple wind turbines, is analyzed as a numerical example. The results show that viscous force has significant influence on the hydrodynamic behavior of the floating body and can successfully be considered by the proposed hybrid models.     

Study on collision between two ships using selected parameters in collision simulation

In the present analysis, several parameters used in a numerical simulation are investigated in an integrated study to obtain their influence on the process and results of this simulation. The parameters studied are element formulation, friction coefficient, and material model. Numerical simulations using the non-linear finite element method are conducted to produce virtual experimental data for several collision scenarios. Pattern and size damages caused by collision in a real accident case are assumed as real experimental data, and these are used to validate the method. The element model study performed indicates that the Belytschko-Tsay element formulation should be recommended for use in virtual experiments. It is recommended that the real value of the friction coefficient for materials involved is applied in simulations. For the study of the material model, the application of materials with high yield strength is recommended for use in the side hull structure.