组合型水泥粉煤灰碎石桩(CFG桩)复合地基在深厚软基处理中的应用

在深厚软土地基(fak≤100 kPa)上建造储罐等建筑物,承载力要求高、不均匀沉降变形要求严,若采用单一CFG桩复合地基加固,可能导致桩距过小或桩长太长,需要采用组合型复合地基,CFG桩+振冲碎石桩复合地基是组合型复合地基的一种。根据CFG桩+碎石桩组合型复合地基的加固机理,分析了其受力特性以及CFG桩和碎石桩的作用,研究表明CFG桩对提高地基承载力和减小沉降起控制作用。基于优化理论,建立了组合复合地基的优化设计方法。通过工程实例讨论了组合复合地基的优化设计方法,结果表明:复合地基的承载力、沉降量和经济效益均满足工程要求。     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.     

Isolating high-priority metro and feeder bus transfers using smart card data

Fixed-rail metro (or ‘subway’) infrastructure is generally unable to provide access to all parts of the city grid. Consequently, feeder bus lines are an integral component of urban mass transit systems. While passengers prefer a seamless transfer between these two distinct transportation services, each service’s operations are subject to a different set of factors that contribute to metro-bus transfer delay. Previous attempts to understand transfer delay were limited by the availability of tools to measure the time and cost associated with passengers’ transfer experience. This paper uses data from smart card systems, an emerging technology that automatically collects passenger trip data, to understand transfer delay. The primary objective of this study is to use smart card data to derive a reproducible methodology that isolates high priority transfer points between the metro system and its feeder-bus systems. The paper outlines a methodology to identify transfer transactions in the smart card dataset, estimate bus headways without the aid of geographic location information, estimate three components of the total transfer time (walking time, waiting time, and delay time), and isolate high-priority transfer pairs. The paper uses smart card data from Nanjing, China as a case study. The results isolate eight high priority metro-bus transfer pairs in the Nanjing metro system and finally, offers several targeted measures to improve transfer efficiency.     

BFL-RS01改性剂在OGFC混合料中的路用性能研究

本文探讨了国产70#沥青、进口70#沥青、BFL-RS01改性剂、SBS改性沥青改性OGFC混合料性能。研究国产沥青和进口沥青分别与BFL-RS01改性剂复配改性OGFC混合料性能,并与SBS改性OGFC混合料性能对比。结果表明,采用BFL-RS01改性OGFC混合料可以提高OGFC混合料的综合路用性能,耐高温性、抗水损害性要比SBS改性OGFC混合料更加优秀。     

深海拖曳系统自稳定二级拖体姿态控制研究

二级深拖系统具有可控性强、母船扰动弱等优点,是重要的海洋探测平台。在实际工作中,二级拖体姿态稳定是保证探测数据准确的基本前提。本文以具有自主调节功能的二级拖体为例,对其姿态控制进行研究。首先建立了二级拖缆的“弹簧——阻尼”模型,并在此基础上建立了二级深拖系统的数学模型。其次根据该系统具有非线性、时变性等特点,设计了具有参数自修正功能的模糊自适应PID控制器,以实现在不同工况下对二级拖体的姿态进行控制。仿真结果表明,未加载控制器时,海况变化对拖体姿态有显著影响,其俯仰角和横滚角均会发生大范围波动。加载模糊自适应PID控制器后,拖体通过自主调节,能够使姿态波动控制在较小范围,从而满足工作要求,验证了拖缆数学模型的正确性和所采用的控制方法的可行性。     

高速船尾部喷水推进局部振动分析

针对高速船尾部采用喷水推进装置的局部振动问题,建立了船体尾部包含喷水推进泵的有限元模型。考虑附连水质量的影响,将船体尾部离散成甲板,底板,喷水推进泵,尾板等局部结构,采用规范经验公式估算以及有限元分析的方法分别对各局部结构的板、板格、板架进行固有频率计算,将其结果与轴频和叶频激励频率进行储备频率校核,判断尾部采用喷水推进装置在振动问题上是否满足规范标准,并为下一步的船体设计提供参考。     

导管螺旋桨水动力学性能的影响因素

为了获取导管螺旋桨水动力性能的主要影响因素,指导导管螺旋桨的优化设计,采用计算流体力学CFD对Ka4-7010+19A导管螺旋桨进行水动力性能研究,分析不同导管长度、导管攻角、螺旋桨纵倾角及多导管组对其水动力特性的影响。结果表明：减少导管长度将使推力系数及扭矩系数同时增大,而敞水效率下降;适当增加导管长度可以略微提高其敞水性能;减小导管攻角在一定进速范围内使推力系数和扭矩系数同时大幅度增加,增加导管攻角将导致推力系数和扭矩系数同时下降;当螺旋桨纵倾角保持在10°以内时,不会对敞水性能产生太大影响。对于多导管螺旋桨而言,前置、后置及不同附属导管直径大小都对敞水性能有很大影响,其中后置大导管组螺旋桨能明显降低螺旋桨扭矩系数,并且能在低进速范围内提升敞水效率。研究成果可支撑导管螺旋桨的优化设计。     

考虑冰、浪等复杂载荷工况的半潜式平台应力与运动响应特征

半潜平台在极地深水海域应用广泛,经常面对冰、浪等复杂载荷。本文从应力时程和运动时程两方面分析了半潜平台在波浪载荷,海冰载荷以及冰-浪联合载荷作用下的响应特征。结果表明,虽然海冰载荷的存在具有一定程度的抑波作用,平台的震荡得到缓解,但是冰-浪联合载荷会导致平台关键节点部位所受应力幅值大幅增加,并超过海冰和波浪单独作用产生的应力之和,对半潜平台的结构安全造成较大威胁。因此在研究、设计极地海域半潜平台时应同时考虑冰、浪对平台的影响。     

基于ADRC的调距桨伺服控制系统设计

船舶调距桨推进系统具有典型的非线性和不确定性,以及柴油机、推进轴系和螺旋桨三者的强耦合性,并受到其执行能力的约束以及风、浪、流等的干扰,使得调距桨伺服控制系统的设计非常困难。本文建立了基于自抗扰控制器(Active Disturbance Rejection Control,ADRC)的调距桨伺服控制系统数学模型,对自抗扰控制器的原理及参数整定进行了分析,采用Matlab/Simulink完成仿真程序的设计和研究,ADRC螺距控制与传统的PID螺距控制相比,具有良好的鲁棒性和稳定性,尤其在抗扰性能方面具有良好的控制效果。     

一种新型尾滑道式船载小艇收放系统可行性研究

作为一种新型的尾滑道式船载小艇收放系统,在回收小艇时,小艇需要以一定的航速冲上尾滑道。回收能否成功除了受制于驾驶员操作水平等主观因素,还与滑道的涉水深度、小艇与母船尾滑道的运动响应等客观条件有关。本文利用切片理论计算了小艇与母船尾滑道的运动响应,并对3级及4级海况下回收小艇的可行性进行了分析。