连云港庙岭三期突堤砂被堤工程施工工艺

根据连云港庙岭三期的特殊情况,采用了砂被筑堤法。介绍了连云港庙岭三期突堤砂被堤工程的概况,从砂桩打设、吹填砂被模袋混凝土护坡等几个方面介绍了砂被堤施工的工艺流程。陈述了施工中出现的技术问题和解决方法以及对原施工工艺的改进。这一工艺取得了良好的施工效果。     

福建主要港口竞争力比较研究

福建港口资源丰富,但众多港口的潜力未得到充分的发挥,港口发展存在一定的滞后性。加快港口开发,提高港口核心竞争力成为当务之急。比较福建主要港口的竞争力,分析了港口-e．_N的优势差距,提出了提升福建港口综合竞争力的有效途径。     

玻璃钢模板在南京港龙潭港区四期水工码头Ⅱ标段中的应用

为提高施工效率和降低成本,在南京港龙湾港在四期水工码头Ⅱ标段引桥圆形立桩施工中,采用新型的平板玻璃钢模板,替代传统的钢模板或木模板施工方法。对玻璃钢板的制作和施工工艺进行详细的介绍。采用玻璃钢模板施工法浇注的圆柱,其光洁度完全达到清水混凝土的效果,并且工艺简单,节约成本,有重要现实意义。     

一条专用车道双向运营BRT/轻轨的可行性

为有效满足BRT或轻轨系统的运行需求,提出在带有固定左转车道的繁忙通勤走廊中央设置一条BRT或轻轨专用车道用于双向运营的概念。由此产生了车辆相交问题,其相交空间设置于由左转车道产生的未利用或未被充分利用的道路中央隔离带。提供了公交车站和相交空间的概念设计可选方案和几何布局示意图,并考虑运行速度、发车间隔、相邻相交空间的距离及相交空间数量等条件,分析系统性能。为确保具有实用性,研究了系统在现有交通走廊上的可实施性。由于该系统具有利于TOD发展的潜力,也可作为未来发展两条专用车道系统的中间步骤。     

舰舰导弹对敌水面舰艇突防能力评估模型初探

舰舰导弹是对水面舰艇攻击的主要武器之一,导弹突防能力是评价导弹性能的重要指标.根据反导武器系统的特点,建立了单发和多发导弹对敌舰攻击的突防能力模型.     

Air pollution history elucidated from anthropogenic spherules and their magnetic signatures in marine sediments offshore of Southwestern Taiwan

Kaohsiung City and its neighborhood in the southwestern coastal plain of Taiwan have suffered serious air pollution since the region became the largest center for heavy-industry on the island. In order to unravel the air pollution history of the region, four ²¹⁰Pb- and ¹³⁷Cs-dated sediment box cores recovered in 2006 from offshore of this area were chosen for magnetic and petrographic analyses. The data were used to distinguish changes in concentration, composition and grain size of magnetic particles in the sediments due to inputs of anthropogenic magnetic spherules. Sedimentation rates have been reasonably constant for the last one hundred years, except at the core tops which were affected by a turbidite layer induced by a typhoon in 2005. Down-core profiles of mass-specific magnetic susceptibility (χ) and saturation isothermal remanent magnetization (SIRM) are similar among the cores, and reflect similar trends to magnetic spherule counts. This reveals that χ and SIRM of modern marine sediments can be used as air pollution indicators for nearby industrialized upwind areas. The studied record indicates that industrialization of the area was gradual during 1950–1980 and boomed afterward, resulting in a high production of airborne magnetic spherules, which is consistent with evidence for poor air quality at that time. Optical and scanning electron microscopic (SEM) surveys of magnetic extracts indicate that the magnetic spherules have grain sizes ranging from a few micrometers up to 50 μm and consist mainly of iron oxides with variable Si, Al, and Ca contents. X-ray diffraction analysis on magnetic extracts from different depths in the cores further indicates that magnetite and pyrrhotite, which are derived from terrigenous detritus, form the magnetic constituents of the sediments before the area was industrialized. In contrast, during the industrial boom, anthropogenic magnetite and hematite spherules became the dominant magnetic particles in the sediments. Down-core profiles of hard isothermal remanent magnetization (HIRM) below the turbidite layer also reveal similar trends to the corresponding magnetic spherule counts, which indicate that the concentration of hematite in the sediments is also closely related to the extent of air pollution. In addition, relatively low values of χ_ARM/χ, which are indicative of coarse magnetic grains, started to occur when large magnetite spherules became significant during the industrialized period. The air pollution history elucidated from our sediment core data not only reflects the development of Kaohsiung from a small village to a highly industrialized metropolitan area in the 20th century, but it is also consistent with the most recent air pollution trends revealed by real time air quality measurements of PM₁₀. Our results demonstrate the usefulness of magnetic parameters for delineating the air pollution history of coastal marine sediments down-wind of nearby industrialized regions.     

基于多层动网格技术的流固耦合方法研究

从弱耦合的角度出发,对某型跨声速风扇叶片做了第一阶扭转振动模态下的流固耦合验证计算,采用三维线性插值方法,通过商用软件ANSYS和CFX实现了计算结构动力学和计算流体力学之间的数据交换,从而使固体域与流体域顺序祸合.应用多层动网格技术解决了固体域模型在流场中运动受到流体网格尺寸制约的问题.计算结果表明,模拟结果可以预估叶轮系统的模态气动阻尼系数,具有工程参考价值.     

舰船中央冷却系统管路流动仿真分析研究

舰船中央冷却系统是一个大型的、复杂的流体网络系统.采用流体系统仿真软件FLOWMASTER对舰船中央冷却系统建立仿真模型,进行稳态和动态工况的计算.通过稳态工况计算验证舰船中央冷却系统设计的合理性,并在此基础上模拟变工况下中央冷却系统管路参数的动态变化特性.仿真模型计算了一些实船调试中可能出现的情况,为实船中央冷却系统的调试指明了方向,确保高效、可靠、顺利地完成调试工作.     

“五点一线”沿海经济带的区位优势及开放政策

为充分发挥辽宁省沿海经济带的区位优势,加快开放型经济建设,实现借由“五点一线”带动全省经济发展的终极目标,通过对“五点一线”沿海经济带区位优势的分析,提出以充分利用地缘优势为重点,研究“五点一线”各城市的投资政策及立法中存在的问题,提出相应建议：利用好开发区资源,鼓励引进外资;加大教育、公共设施、技术服务等产业的政策优惠度;遵循市场经济规律,开创新的招商引资政策机制。     

一种单缸护箱结构的集装箱散货装箱机

由于环保标准的提高,以及用户对一些货物破损率有较高要求,散货装集装箱运输方式的应用越来越多,比较典型的是块煤装集装箱运输。但是,这种运输方式在我国应用历史较短,散货装入集装箱比较困难。要充分发挥运力,降低成本,就必须将集装箱装满,而集装箱除底面外,侧面和上面均不能承受较大的力,如果要把集装箱倾斜过来装箱,就要解决箱体侧面受压的问题。