Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

中国近周边海域船舶排放清单及排放特征研究

为分析我国沿海船舶大气污染物排放特征,本研究以船舶自动识别系统数据为基础,收集整理国内外船舶静态数据、排放参数,结合船舶实际航行资料,采用动力法估算了中国近周边海域2014年的船舶排放清单,并分析了靠港、锚泊、港内机动、低速、巡航5个船舶状态下的排放特征,按不同海区对排放进行了统计,并给出了我国三个排放控制区的船舶大气污染物排放情况。结果表明,中国近周边海域范围内由于船舶活动一年产生的硫氧化物、氮氧化物、PM10分别约为87.98万吨、137.84万吨、11.73万吨。排放源分析表明,在船舶的主机、辅机和锅炉3种排放源中,主机是主要排放源,且在航行状态上低速巡航状态排放最大。船舶排放污染物的空间分析表明,90%的船舶排放发生在海岸线至领海基线外96海里范围内,即距离陆地200公里的海域内。     

Formulating cargo inventory costs for liner shipping network design

This study examines how to incorporate the inventory costs of containerized cargoes into existing liner service planning models such that the designed networks could be improved while not causing extra modeling/computational burden. Two approaches are compared: (i) not considering the inventory costs at all and (ii) incorporating the inventory costs associated with onboard time and those related to transshipment by assuming a fixed connection time. The two models are compared with the ideal model capturing the exact inventory costs on a route choice problem and a capacity planning problem based on extensive randomly generated and practical numerical experiments. The results show that: first, ignoring the inventory costs in service planning models may lead to network design with much higher costs (poor network design decisions); second, in service planning models assuming weekly frequency, the inventory costs associated with onboard time could be formulated exactly, and those related to the connection time of weekly services could be approximated by assuming fixed connection time of 3.5 days for ports with 1 day’s minimum connection time and 4.5 days for ports with 2 days’ minimum connection time.     

Mathematically calculating the transit time of cargo through a liner shipping network with various trans-shipment policies

This paper derives the mathematical expressions for the transit time of cargo through a liner shipping network. Main efforts are devoted to deriving the calculation expressions of the connection time of cargo during trans-shipment. For the forward and many-to-one trans-shipment policies, we conduct a minor correction towards the expressions in existing studies to improve the completeness. Meanwhile, we propose an alternative but more straightforward calculation method for connection time which bypasses the complicated inductive argument in existing studies. Then we introduce two new trans-shipment policies: backward trans-shipment and one-to-many trans-shipment, and mathematically calculate the corresponding connection times. Numerical experiments also deliver some managerial insights into the effectiveness of backward trans-shipment in transit time control.     

内蒙古交通环境监测信息处理平台的构建与应用

针对内蒙古自治区公路建设里程逐年快速增长的发展态势,建立与完善交通环境监测信息处理平台,是动态掌握区域内交通环境质量状况与变化趋势的重要途径。基于内蒙古自治区交通运输环境监测网络建设试点工程,通过集成在线监测设备、地理信息技术、数据统计与分析等技术,建成了内蒙古交通环境监测信息处理平台,从而为自治区交通环境监督管理和宏观决策提供了有力的基础数据和技术支撑。     

永磁同步电机直接转矩控制的建模与仿真研究

为了研究永磁同步电机直接转矩控制系统的动态性能,利用Matlab/Simulink建立了永磁同步电机直接转矩控制模型,并对电机的启动性能以及负载为阶跃输入情况进行了仿真分析,仿真结果表明所构建的系统模型动态过程符合实际调速系统运动过程。     

吸盘式挖泥船全电力驱动系统设计

本文根据某吸盘式挖泥船的使用要求,设计了全电力驱动系统方案。对配电系统方案、变频驱动系统方案和谐波处理方案进行了详细分析。与当前典型的挖泥船变频驱动系统方案相比,本文提出了一种新的更加经济的系统方案,并在实船已成功应用。     

提高应变梁加工合格率

本文分析了应变梁因平面度超差而出现的质量问题,通过刀具、加工参数等方面改进来提高其加工质量。