The role of professional associations in shipping

This article is in three parts. The first covers the historical development of qualifying associations. The second covers the particular role of maritime institutions that include The Royal Institution of Naval Architects, The Institute of Marine Engineering Science and Technology and The Nautical Institute. The third and final section considers the future for maritime professional associations in the context of international shipping.     

惠州港在珠江三角洲战略定位的思考

珠江三角洲各地港口建设往往只从本地区角度考虑,在一定程度导致各市港口性质相似、功能雷同,并为争夺货源进行恶性竞争。论文分析了惠州港的优势,再用层次分析法对集装箱港口竞争的关键要素进行定性和定量分析,得出珠江三角洲9个港口发展集装箱码头建设的权重。为惠州港的港口资源在珠三角洲港口群中的最优配置提供相关的研究资料。     

舰船全电力推进系统模拟研究

介绍了舰船全电力推进系统的优点、典型国外电力推进系统和我校建 船舰电力推进模拟研究系统的组成及其工作原理。重点研究了螺旋奖负载模拟装置的硬件组成、相关的计算及控制方法。在此基础上，对采用电力推进舰船的运动进行了半物理仿真，取得了较好的效果。     

铁路货运代理向第三方物流全面转变的途径

阐述第三方物流的定义、第三方物流企业的分类及其与传统的货运代理企业的区别，以及铁路货运代理向第三方物流全面转化的必要性和可行性，对中国铁路物资总公司发展第三方物流的案例进行了分析，并论述了铁路货代理向第三方物流全面转化的途径。     

A review of the Effect of α/W ratio on fracture toughness （Ⅱ） experimental investigation in LEFM

In part I of this series, experimental investigation in EPFM （elastic-plastic fracture mechanics） had been discussed. In this paper, experimental investigation in LEFM （ linear elastic fracture mechanics） is given. Fracture toughness tests had been carried out on three different strength steels, using both through-cracked specimens with different α/W ratio and semi-elliptical cracked specimens with variable crack size and shape. Results show that the fracture toughness KIC increases with decreasing α/W when α/W 〈 0.3 for three-point-bend specimens, and that for α/W 〉 0.3, it is independent of α/W. Shallow crack specimens, both through-cracked and surface-cracked, gave markedly higher values than deeply notched specimens. However, the effect of crack shape on fracture toughness is negligible. Results also show that the LEFM approach to fracture is not tenable for design stresses where αc is often very small, far less than 2.5 （ KIC/σy）^2.     

区域性轨道交通线网规划评价指标体系探讨

区域性轨道交通线网评价与公路网、公交网络的评价体系存在一定不同。在分析了我国现有的区域性轨道交通线网规划评价体系的基础上,阐述了评价指标体系选取的原则及方法;通过对各项指标进行分析比较,定性和定量相结合,利用目标层次分类展开法,建立了一套适用于区域性轨道交通线网规划的综合评价指标体系。     

ZPW-2000A轨道电路红光带的分析方法和影响道砟电阻的成因

概述ZP W-2000A无绝缘轨道电路的特点,并基于现场一次典型的道砟电阻降低情况为例,分析造成现场道砟电阻降低的原因,并提出解决办法.     

深水桥梁垫层隔震基础冲刷演化机理与设计建议

群桩和沉井作为跨江海桥梁的基础支撑体系已得到广泛应用,但近年来实际工程的水深不断增加,现有技术已难以适用于50 m以上的超深水环境条件。为研究垫层隔震基础这一新型深水桥梁基础的冲刷演化机理,针对周期为1.2 s,波高分别为4、6、8 cm的3种波浪条件,以及海流流速为25 cm·s^-1,波浪波高为6 cm,周期为1.2 s的波流共同作用条件,开展砂土中垫层隔震基础冲刷演化机理的波流水槽模型试验研究,结合仅单向流作用下的基础体系冲刷演化机制,重点考察并梳理了隔震垫层的5种典型破坏形式及其特点。结果表明：仅存在单向流作用时,垫层的破坏形式主要为边缘破坏、剪切破坏和完全破坏,且严重程度随流速增大而增大;存在波浪作用时,海床泥沙及垫层材料起动后将发生振荡,导致隔震垫层还会发生掩埋破坏和掏底破坏;波流共同作用时,产生的影响比二者单独作用时更严重,对基础体系的正常工作产生严重影响。此外,通过分析交界面位置附近材料在冲刷过程中的滑动与滚动过程,认为颗粒材料的滑动和滚动是造成隔震垫层材料流失的主要原因。最后,对比分析了国内外抛石设计规范中的粒径计算方法,并在此基础上对垫层材料的设计提出建议。     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.     

Lattice-based group signature with verifier-local revocation

Among several post quantum primitives proposed in the past few decades, lattice-based cryptography is considered as the most promising one, due to its underlying rich combinatorial structure, and the worst-case to average-case reductions. The first lattice-based group signature scheme with verifier-local revocation(VLR) is treated as the first quantum-resistant scheme supported member revocation, and was put forward by Langlois et al. This VLR group signature(VLR-GS) has group public key size of O(nm log N log q), and a signature size of O(tm log N log q log β). Nguyen et al. constructed a simple efficient group signature from lattice, with significant advantages in bit-size of both the group public key and the signature. Based on their work, we present a VLR-GS scheme with group public key size of O(nm log q) and signature size of O(tm log q). Our group signature has notable advantages: support of membership revocation, and short in both the public key size and the signature size.