Truck backhauling on two terminal networks

Truck backhauling reduces empty truck-miles by having drivers haul loads on trips back to their home terminal. This paper 1) examines the impact on backhauling opportunities of terminal locations and directional imbalances in the flow of freight from the terminals, and 2) develops a method for determining which truckloads should be backhauled. Backhauling is studied for two terminals sending full truckloads to many customers under steady-state conditions. This research develops two backhauling models. The first is a continuous model that makes simplifying assumptions about customer locations and travel distances. It results in formulae showing that 1) savings from backhauling increase at a decreasing rate as the directional flow of freight between two terminals becomes more balanced and 2) backhauling is an important, but often ignored, factor in terminal (e.g. trucking terminal, warehouse, or plant) location and supplier selection decisions. The second model is a more general discrete model that determines which loads should be backhauled to minimize empty truck-miles.     

The drag on an airplane taking off from a floating runway

The motions of an infinitely long, two-dimensional runway subjected to the dynamic moving load imposed by an airplane taking off are investigated. The runway is assumed to be floating in an inviscid fluid and is initially at equilibrium before the plane takes off. The deformation of the runway resulting from the take-off is wave-like and moves in the same direction as the plane. The maximum drag occurs when the plane catches up with the first wave. Three different runway configurations were considered: a baseline and ones which were ten and one hundred times more flexible than the baseline. For these runways, the added drag to the aircraft was very small, ranging from 1% for the stiffest to 10% for the most flexible runway.     

High-speed rail service: Issues for the Detroit-Chicago corridor

Several issues concerning the implementation and operation of high-speed rail service in the Detroit-Chicago corridor are identified and discussed in this paper. The primary concern is whether such a service is likely to be attractive enough to induce the private sector to provide it. While the outlook for private operation appears pessimistic, consideration of a broader range of potential benefits (e.g., direct and indirect employment) may justify public involvement and investment.     

Optimal transit subsidy policy

The basic justification for transit subsidy is that such a subsidy is necessary, given substantial economies of scale, in order to permit fares to be set at a level which will result in reasonably efficient use of the service. Efficiency is not, however, merely a matter of the level of the fares but even more of the fare structure and pattern. Major changes in fare patterns are needed to permit reasonable efficiency of utilization to be attained, and full advantage derived from subsidy. Differentiation according to time and direction, as well as the distance of travel, is required. Ideally, competing modes such as the private automobile should be priced at marginal cost, differentially by time and place, and the subsidy should be derived from taxes on land values in the areas where such values are enhanced by the presence of transit service at low fares. In the absence of such conditions, fares should differ from marginal cost in ways that take into account the impacts of transit fare variations on auto traffic and congestion, and on the subsidy requirements and the adverse impacts of the taxes imposed to finance the subsidy.In addition to these economic efficiency considerations there may be added considerations of distributional impact and political acceptability, which may modify the optimal solution somewhat but should not greatly change the main outlines of the patterns to be recommended.     

An experimental testbed for mobile offshore base control concepts

 The concept of a mobile offshore base (MOB) reflects the need to stage and support military and humanitarian operations anywhere in the world. A MOB is a self-propelled, modular, floating platform that can be assembled into lengths of up to 2 km, as required, to provide logistic support to US military operations where fixed bases are not available or adequate. It accommodates the take-off and landing of C17 aircraft, and can be used for storage, as well as to send resources quickly to shore. In most concepts, the structure is made of three to five modules, which have to perform long-term station-keeping in the presence of winds, waves, and currents. This is usually referred to as dynamic positioning (DP). In the MOB, the alignment is maintained through the use of thrusters, connectors, or a combination of both. In this paper, we consider the real-time control of scaled models of a MOB. The modules are built at the 1 : 150 scale, and are kept aligned by rotating thrusters under a hierarchical hybrid control scheme. This paper describes a physical testbed developed at the University of California, Berkeley, under a grant from the US Office of Naval Research, for the purpose of evaluating competing MOB control concepts. Received: June 4, 2002 / Accepted: October 30, 2002 Acknowledgments. This material is based on work supported by the MOB Program of the US Office of Naval Research under grant N00014-98-1-0744. The authors would like to thank the Link Foundation for its support. Many thanks go to Stephen Spry for his experimental work. The photographs are courtesy of Bill Stone, Gerald Stone, and Jay Sullivan of the PATH Publications staff. Address correspondence to: A.R. Girard (e-mail: anouck@eecs.berkeley.edu)     

A network equilibrium approach for modelling activity-travel pattern scheduling problems in multi-modal transit networks with uncertainty

An understanding of the interaction between individuals’ activities and travel choice behaviour plays an important role in long-term transit service planning. In this paper, an activity-based network equilibrium model for scheduling daily activity-travel patterns (DATPs) in multi-modal transit networks under uncertainty is presented. In the proposed model, the DATP choice problem is transformed into a static traffic assignment problem by constructing a new super-network platform. With the use of the new super-network platform, individuals’ activity and travel choices such as time and space coordination, activity location, activity sequence and duration, and route/mode choices, can be simultaneously considered. In order to capture the stochastic characteristics of different activities, activity utilities are assumed in this study to be time-dependent and stochastic in relation to the activity types. A concept of DATP budget utility is proposed for modelling the uncertainty of activity utility. An efficient solution algorithm without prior enumeration of DATPs is developed for solving the DATP scheduling problem in multi-modal transit networks. Numerical examples are used to illustrate the application of the proposed model and the solution algorithm.     

Approaches and Techniques for Modelling CO2 Emissions from Road Transport

Abstract

Transport accounts for around a quarter of CO₂ emissions globally. Transport modelling provides a useful means to explore the dynamics, scale and magnitude of transport-related emissions. This paper explores the modelling tools available for analysing the emissions of CO₂ from transport. Covering a range of techniques from transport microsimulation to global techno-economic models, this review provides insights into the various advantages and shortcomings of these tools. The paper also examines the value of having a broad range of perspectives for analysing emissions from transport. The paper concludes by suggesting that the broad range of models creates a rich environment for exploring a spectrum of policy questions around the emissions from transport, and the potential for combining modelling approaches further enhances the understanding that can be attained.     

基于GIS的机动车排放模型及其应用

为解决大城市的空气污染问题,必须提出新的策略遏制快速城市化地区空气污染物的增加。MEASURE模型是服务于城市和区域评价的机动车排放评估系统,可为研究者和规划师提供一种评估机动车减排策略的新方法。以佐治亚州亚特兰大市一块面积为100km2的研究区为例,探讨了该模型在机动车排放实证研究中的应用。结果表明,该模型可准确定位各交通小区和各级道路上的污染排放,实现污染排放的空间分析,加深人们对机动车排放的理解,为未来城镇土地利用总体规划和交通规划提供科学参考。     

The hydraulic performance and structural integrity of A-Jack armour layer

A-Jacks are concrete armor units that are used in both open channel and coastal applications.In open channel applications,they are used for bank and toe protection,flow and grade control,bridge pier scour protection,energy dissipation,and habitat.These small units may be fabricated in standard block machines.In coastal applications,A-Jacks are used in breakwaters,jetties,revetments,and habitat development.Coastal units are generally much larger and more robust than the small open channel units.This paper focuses on coastal applications and in particular,combines results on three topics:(1)recent hydraulic model studies,(2)alternative fabrication methods,and(3)bundle placement construction methods.Hydraulic models studies were conducted that examined the standard random and uniform placement methods,and also the bundle placement method.In bundle placement,3~20 A-Jacks are banded together,lifted with a spreader bar,and placed as a single crane pick.This significantly decreases installation time during construction.It also provides a more hydraulically stable placement technique.The hydraulic model tests examined the bundle stability in random waves for cases where the binding remains in tack and is removed.The geometry of A-Jacks enables a variety of fabrication techniques.One option is to fabricate the A-Jacks as two pieces using flat forms and then grout the two pieces together.Flat forms may be used in conventional block machines for A-Jacks sizes up to 1.3 m.Larger sizes may be wet cast in flat forms or gang forms.The A-Jacks geometry has been recently modified to increase grouting efficient and strength.Large A- Jacks may also be cast in a single piece using "clam shell" type forms.     

An activity-based approach for scheduling multimodal transit services

This paper proposes a new activity-based transit assignment model for investigating the scheduling (or timetabling) problem of transit services in multi-modal transit networks. The proposed model can be used to generate the short-term and long-term timetables of multimodal transit lines for transit operations and service planning purposes. The interaction between transit timetables and passenger activity-travel scheduling behaviors is captured by the proposed model, as the activity and travel choices of transit passengers are considered explicitly in terms of departure time choice, activity/trip chain choices, activity duration choice, transit line and mode choices. A heuristic solution algorithm which combines the Hooke–Jeeves method and an iterative supply–demand equilibrium approach is developed to solve the proposed model. Two numerical examples are presented to illustrate the differences between the activity-based approach and the traditional trip-based method, together with comparison on the effects of optimal timetables with even and uneven headways. It is shown that the passenger travel scheduling pattern derived from the activity-based approach is significantly different from that obtained by the trip-based method, and that a demand-sensitive (with uneven headway) timetable is more efficient than an even-headway timetable.