Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

空调客车围护结构隔热设计方案比较研究

利用数值分析的方法，分析了空调客车非稳态情况下四种结构车厢体的二维温度场分布，计算了车厢体的二维传热损失和热桥附加传热损失。在骨架和内衬之间加一层隔热组织改善了车的隔热特性，为客车围护结构隔热优化提供了依据。     

大城市社会公共停车场选址规划模型研究

在考虑交通系统总体效益的基础上，采用数学分析的方法对社会公共停车场的规划布局进行定量分析，提出基于广义费用最小的最优社会公共停车场选址模型，以确定城市内社会公共停车场的合理布局，使城市交通系统总体效益达到最优。     

瞄准交通强国建设新坐标 开启海南海事发展新征程

《交通强国建设纲要》(以下简称《纲要》)开宗明义,指出建设交通强国是以习近平同志为核心的党中央立足国情、着眼全局、面向未来作出的重大战略决策,是建设现代化经济体系的先行领域,是全面建成社会主义现代化强国的重要支撑,是新时代做好交通工作的总抓手。围绕着落实《纲要》,交通运输部海事局站在统筹和引领海事发展大局的高度,提出了以"五个一流"谱写新时代交通海事新篇章的发展思路,这为我们进一步学习领会和贯彻落实好交通强国建设的目标任务,推动和提升海事高质量发展提供了基本遵循和奋斗目标。     

薄层环氧沥青混合料抗剪级配优化研究

依托桃夭门大桥钢桥面铺装大修工程实例， 对如何提高薄层环氧沥青混合料抗剪切性能进行了分析研究， 提出 EA-10_S-I中断级配设计方法， 并通过室内混合料抗剪性能试验、 路用性能检测和试验段铺装检测， 优化抗剪级配设计曲线。 研究结果表明优化 EA-10_S-I级配相对于传统 Fuller 密级配沥青混合料有更好的抗剪性能， 而疲劳耐久性则优于 FAC-10_优 级配。     

论岸电技术应用保障及规范管理

本文首先介绍了岸电技术应用背景现状及行业规范推广存在的问题.然后针对低压岸电技术安全、高效、便捷的应用推广规范化,从岸电低压供电制式、岸电电力传输、岸电电力连接接口三方面,进行了问题分析,提出了技术改造和规范管理的建议.     

浅谈综合工费对铁路隧道机械化施工经济性影响

为分析研究综合工费对大型机械钻爆法施工概算费用的影响,以3条新建双线铁路隧道项目数据为依托,核算出不同施工模式下的经济指标及工程费用;建立基期综合工费单价理论计算模型,计算出不同施工模式、不同围岩等级条件下新建铁路双线隧道临界综合工费单价。通过与普通钻爆法对比,大型机械钻爆法施工建造费用增长约10%;当基期综合工费高于226. 54元/工日时,大型机械钻爆法施工的经济性得以体现。     

无轴轮缘推进器电机与水力部件耦合优化设计研究

针对目前无轴推进器电机与水力部件设计时多未考虑两者耦合的问题,本文提出两者耦合的优化设计方法.采用多参数非线性优化方法,基于电机和导管螺旋桨设计理论公式,并考虑无轴推进器电机转子的直径等同于螺旋桨内径加上叶梢间隙,以及螺旋桨输出转矩加上间隙的摩擦转矩值作为电机输入转矩的关系,建立了一种新型优化设计模型,通过优化方法进行迭代分析,利用5.5 kW无轴推进器进行方法验证.研究结果表明,所提出的优化方法有效地考虑了无轴推进器电机与水力部件的耦合关系,可对推进器效率进行综合优化.     

Real-Time Fault Diagnosis for Gas Turbine Blade Based on Output-Hidden Feedback Elman Neural Network

In order to remotely monitor and maintain large-scale complex equipment in real time, China Telecom plans to create a total solution that integrates remote data collection, transmission, storage, analysis and prediction. This solution can provide manufacturers with proactive, systematic, integrated operation and maintenance service, and the data analysis and health forecasting are the most important part. This paper conducts health management for the turbine blades. Elman neural network, and improved Elman neural network, i.e., outputhidden feedback (OHF) Elman neural network are studied as the main research methods. The results verify the applicability of OHF Elman neural network.