带阻尼绕组的永磁同步电动机起动分析

摘要：为了改善永磁电机的起动性能,建立了无阻尼绕组和带阻尼绕组两种永磁同步电动机的数学模型方程,并建立它们的模型,在一组参数下对两种永磁同步电动机进行了起动性能仿真,比较分析了带阻尼绕组的永磁同步电动机在起动上的优点。     

基床式基础防波堤的动力软化判别标准的研究

以长江口深水航道治理二期工程为依托,进行基床基础防波堤的动力软化判别标准的研究,分析在波浪作用下3个不同沉降量的典型断面下卧地基土的自重应力、附加静应力、波浪作用的附加动应力分布间的关系,初步得出该地区软粘土可能出现动力软化现象的判别标准。     

香港地铁的安全风险管理

概述地铁有限公司在香港建立和实践安全风险管理体系的经验、运营铁路安全管理组织架构、工程项目各阶段的安全风险管理规划、主要安全风险管理任务及分析方法等.     

配送中心多品种最优存储模型探讨

针对配送中心品种多、资金和容积等限制条件多的实际情况,通过分析各种条件的制约关系,建立多变量约束极值的存储问题的数学模型,并利用库恩一图克条件求得最优解,可为降低企业的物流配送成本,提高竞争力提供重要的手段。     

非稳态载荷对二维轮轨纯滚动接触应力和变形的影响

为了揭示轮轨波状表面与非稳态载荷的内在联系,利用有限元法,建立了二维弹塑性轮轨纯滚动接触计算模型,分析法向接触载荷波动值对钢轨残余应力、应变和变形的影响。模型中材料本构采用考虑棘轮效应的Jiang-Sehitoglu模型,非稳态仅考虑法向接触载荷的简谐变化,用弹塑性无限半空间表面上重复移动赫兹法向压力分布模拟反复纯滚动接触过程。发现非稳态法向接触载荷作用下产生同样波长的波状接触表面;随滚动次数的增加,残余应力增大,但很快趋于稳定,而残余应变也增大,但增大速率衰减;载荷波动值越大,波谷和波峰处的纵向残余应力越大,波谷处的轴向残余应力、残余剪应变和表面纵向位移越大,而波峰处的轴向残余应力、残余剪应变和表面纵向位移越小,波深越大。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

叙泸段河道非恒定流作用下水力参数的变化

金沙江与岷江干支流上水电站调峰发电下泄非恒定流引起下游叙泸段河道水流条件显著变化。结合一维非恒定流数学模型和实测资料分析研究叙泸段河道内代表性非恒定流传播过程及其造成水力参数相对于概化恒定流条件时的变化情况。结果表明:叙泸段河道内典型非恒定流波长为218 km,传播速度3 m/s;随着传播距离增加波衰减幅度减小,波形变得光滑;当宜宾水位处于波峰时,下游沿程流量呈现递减趋势,波谷则正好相反;相对于恒定流条件,其流量变化范围为0~730 m3/s,水位抬升0.5~2 m;断面平均流速变化在-0.5~0.2 m/s,比降变化范围为-0.2‰~0.2‰,比降最大值为1.38‰。     

柳江红花二线船闸输水系统布置与水力学模型试验研究

红花二线船闸是广西西江黄金水道首批重点建设项目,是提升柳江及西江通航能力、实现西江亿吨黄金水道的重要工程,其闸室规模与三峡船闸一致、工作水头近20 m、输水能量巨大。结合工程特点,选择了闸底长廊道侧支孔输水系统,设计了输水系统具体布置,并提出采用汇合廊道改善单边阀门运行输水流态的措施。通过比尺为1∶30的物理模型试验,对不同阀门运行工况下输水系统水力特性、闸室船舶停泊条件、进出水口水流条件等开展研究,推荐了使水力指标满足规范和设计要求的阀门开启方式。