光纤光栅孔隙水压力计的研制与应用研究

阐述了光纤Bragg光栅(FBG)技术的原理以及传感器的结构设计原理和方法,采用光纤Bragg光栅(FBG)传感技术研制了适合岩土工程使用的光纤光栅孔隙水压力计,对研制的6支光纤光栅孔隙水压力计进行了试验检验并埋设于某高速公路软土路基中试测孔隙水压力以检验研发成果。实践结果表明该仪器克服了常规仪器的某些缺点,并有稳定性好、耐腐蚀等优点,可以较好地应用于岩土工程监测当中。本仪器的研制对于光纤传感技术在岩土工程领域的应用具有积极的推动作用。     

运梁河特大桥转体梁不平衡重称重试验分析

哈大客专运粮河特大桥跨既有线连续梁采用平转法施工,为确保转体顺利进行,转体前进行了T构不平衡重试验分析,文中介绍了一种转体构件不平衡重的测试方法和应用过程。结果表明,方法有效可行,可供同类工程借鉴。     

超声冲击处理对S32101双相不锈钢焊缝残余应力及组织的影响

对S32101双相不锈钢焊后进行超声冲击处理,观察超声冲击处理前后母材及焊缝的组织形貌,采用XRD应力测试仪分析超声冲击处理前后焊缝及其附近的残余应力分布,并利用硬度计对焊缝截面进行硬度测试.结果表明,超声冲击处理后母材和焊缝都发生了塑性变形,母材中的铁素体组织被细化,奥氏体被拉长、破碎;焊缝表面的组织产生塑性变形,魏氏体状奥氏体和晶内奥氏体被细化,且被细化的晶粒均匀分布在焊缝表层,超声冲击处理强度为10 s/cm~2时效果最佳,可将600 MPa的拉应力转化为600 MPa的压应力.超声冲击处理过后表层的硬度分布更加均匀且硬度值提高了50～90 HV.     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

铁路路基动态变形模量的数值模拟分析

介绍铁路路基动态变形模量理论计算公式的推导及动态变形模量的测试原理,采用有限元软件模拟动态变形模量的测试过程,分析承载板与土体接触压力、路基动态变形模量的影响因素,并计算动态变形模量的有效测试深度.结果表明:在承载板中心一定范围内,接触压力模拟结果较理论计算值大;土体的动弹性模量对接触压力影响很小,可以忽略;路基动态变形模量测试冲击荷载作用下,土体只发生弹性变形;动态变形模量与土体动弹性模量呈线性关系,路基动态变形模量的模拟结果大于理论计算值;土体的泊松比对动态变形模量影响较小;动态变形模量有效测试深度建议取0.5~0.6 m.     

海洋平台海洋平台常用流量计的选型分析

文章主要介绍了海洋平台常用流量计的原理和特点,结合海洋平台的特点叙述了流量计选型时的注意事项,并给出了海洋平台常用流量计的选型原则和计算方法,为海洋平台选出最合适的流量计提供了一种方案。     

海上风电大直径单桩基础固有频率影响因素的数值分析

针对海上风电整机结构其低阶固有频率的控制问题,基于有限元分析技术开展小直径桩土相互作用的数值模拟分析,与试验结果、API规范计算结果进行对比,验证了数值模型的适用性,分析大直径单桩结构桩内土芯、冲刷深度、表层土置换措施对整机固有频率的影响,结果表明,基于有限元实体单元计算所得一、二阶整机固有频率要明显大于传统p-y方法计算结果;桩内土芯对一、二阶整机固有频率影响很小;在一定范围内,随着泥面冲刷深度的增加,一、二阶固有频率降低不明显,认为传统p-y方法对于大直径单桩的适用性有待研究;在实际工程设计中,桩内土芯的影响可忽略;对于大直径单桩,在一定范围内可以忽略冲刷的影响。     

螺柱焊在船舶焊接卡马中的应用

本文介绍了螺柱焊焊接工艺及其在船舶焊接卡马中的应用,并结合实船使用情况,对螺柱式焊接卡马和普通焊接卡马在工效和成本方面进行了对比分析。     

Automatic outer surface extraction of femoral head in CT images

Computer-aided hip surgery planning and implant design applications require accurate segmentation of femoral head and proximal acetabulum. An accurate outer surface extraction of femoral head using marching cubes algorithm remains challenging due to deformed shapes and extremely narrow inter-bone regions. In this paper, we present an automatic and fast approach for segmentation of femoral head and proximal acetabulum which leads to accurate and compact representation of femoral head using marching cubes algorithm. At first, valley-emphasized images are constructed from original images so that valleys stand out in high relief. Otsu’s multiple thresholding technique is applied to seperate the images into bone and non-bone classes. Region growing method and threedimensional (3D) morphological operations are performed to fill holes in the bone. In the reclassification process, the bone regions are further segmented, and the boundaries of the bone regions are further refined based on Bayes decision rule. Finally, marching cubes algorithm is applied to reconstruct a 3D model and extract the outer surface of femoral head and proximal acetabulum. Experimental results show that this method is an accurate segmentation technique for femoral head and proximal acetabulum and it can be applied as a tool in medical practice.     

道路交通事故清障救援装备专用作业装置测试与评价

针对道路交通事故综合救援装备专用作业装置存在功能不匹配、性能适应性差等问题,参照《清障车》(QC/T 645)和《道路车辆清障救援操作规范》(JT/T 891),提出了道路交通事故清障救援装备专用作业装置的测试与评价方法。并在此基础上,以某型道路交通事故综合救援装备为例,分别选取空载、额定载荷、超载、侧绞盘载荷、托臂载荷、扶正等系列工况测评。验证结果表明:该型道路交通事故综合救援装备的功能和性能均合格。