Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.     

桥梁工程后张法预应力梁管道压浆材料的研究与应用

通过对后张法预应力梁管道施工具体情况进行分析,最先应从三个方面入手,它们分别是压浆材料工作性能试验、原材料的制备与选取、压浆材料强度试验,将后张法预应力梁管道压浆材料的制备方式进行详细的分析及阐明,在此之后,以三岔河大桥工程实践应用案例,阐述了后张发法预应力梁管道压浆技术在工程中重要意义。     

荷兰海军APAR多功能雷达系统及其开发经验

为充分发挥多功能优势,APAR雷达采用了高效控制手段,对雷达信号收/发时间和能量进行综合管理,综合平衡二者系统资源开支。APAR雷达波形设计还综合考虑了包括作战需求、接收信号特征、技术特征和参数等在内的各种因素。APAR雷达在系统设计、系统工程、详细设计与评估测试等方面均进行了总体规划,并很好地吸收了已有的技术积累,保证了系统最终成功。     

横浪海况下"蓝鲸"号起重船吊装上部组块运动响应研究

"蓝鲸"号起重船舶在海上吊装大型上部组块施工过程中,有时受现场条件限制,会出现横浪吊装作业工况,此时组块运动容易偏大,威胁作业的安全,甚至造成设备损坏和人员伤亡事故.本文针对横浪-系泊系统-起重船-吊缆-上部组块复杂耦合系统,开展了数值模拟研究工作,分析吊装组块的运动响应规律和特性.将规则波中运动响应预报结果与水池模型试验结果进行了对比分析,验证了数值模拟的合理性及其精确性,揭示了起重船和吊物的耦合运动机理.针对典型横浪不规则波工况,开展了运动响应预报,并和Noble Denton相关衡准进行了对比,给出了允许施工作业工况的建议.     

基于LiDAR点云的船载砂石体积自动测算系统

针对现有船舶运输砂石体积计算主要依赖人工方式称重和纸质运单流转、精度不高且效率很低的难题，采用基于八叉树的点云精简和聚类分析进行复杂环境下船舶点云的自动识别和提取；采用基于改进SK-4PCS （semantic-keypoint-based 4-points congruent sets）的粗配准和基于Point-to-Plane ICP （iterative closest point）的精配准进行空载和满载两期点云由粗到精的高效配准，设计实现了一种利用LiDAR （light detection and ranging）点云数据进行船载砂石自动测算的系统. 采集了江西南昌赣江运砂船数据进行实验验证，从扫描到出结果一艘船的砂石体积自动测算时间少于2 min，同船多次测算结果最大相对误差小于1.00%，砂石体积与实际真值相比的最大误差小于2.00%，满足实际业务需求.      

Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.     

Decomposing and Cluster Refinement Design Method for Application-Specific Network-on-Chips

Along with higher and higher integration of intellectual properties (IPs) on a single chip, traditional bus-based system-on-chips (SoC) meets several design difficulties (such as low scalability, high power consumption, packet latency and clock tree problem). As a promising solution, network-on-chips (NoC) has been proposed and widely studied. In this work, a novel algorithm for NoC topology synthesis, which is decomposing and cluster refinement (DCR) algorithm, has been proposed to minimize the total power consumption of application-specific NoC. This algorithm is composed of two stages: decomposing with cluster generation, and cluster refinement. For partitioning and cluster generation, an initial low-power solution for NoC topology is generated. For cluster refinement, the clustering is optimized by performing floorplan to further reduce power consumption. Meanwhile, a good tradeoff between power consumption and CPU time can be achieved. Experimental results show that the proposed method outperforms the existing work.     

某一胶黏剂在橡胶金属件中的粘接性能研究

对比某一热硫化肢黏剂与现用肢黏剂在不同胶料、不同硫化体系、不同基体材质、不同表面处理方式及不同受力方式下的粘接性能,为公司储备胶黏剂提供参考依据。     

FANUC 0i mate TD数控车床主轴故障调试分析

本文以FANUC 0imate TD数控车床为例,分析了其主轴不能正常工作的原因,从数控系统参数设置、PMC程序、变频器等多方面综合诊断,通过修改相关程序与数据逐步完成功能检测与调试,最终排除故障恢复主轴正常运行。