基于FPGA的单端行波故障测距系统的设计与实现

针对现有的10 k V输电线单端行波故障测距理论,提出了一种基于Cyclone IV系列FPGA芯片EP4CE15F17C8N的软硬件实现方案。采用FPGA自顶向下模块化思想,设计了行波故障测距系统,采用AD7356进行高速数据采集,通过改进的凯伦鲍尔矩阵进行相模变换,用FIR滤波器IP核进行小波变换求模极大值,最后根据模极大值的极性选择测距公式计算故障距离。通过时序仿真和板级测试表明,该方案设计时序稳定,且定位精度高、实时性强。     

反激变换器电流连续和断续的比较研究

根据单端反激变换器的电路和工作波形,推导了其在输出电流连续和不连续情况的工作原理,并且给出了在MATLAB/Simulink中的正激变换器的仿真模型和仿真结果。通过对仿真结果的分析得出以下结论:其优点是电路所用元器件少,电路简洁。其缺点如下:输出功率较小,稳定性较差,以及开关应力大,电路能量损耗较大。     

基于LiDAR点云的船载砂石体积自动测算系统

针对现有船舶运输砂石体积计算主要依赖人工方式称重和纸质运单流转、精度不高且效率很低的难题，采用基于八叉树的点云精简和聚类分析进行复杂环境下船舶点云的自动识别和提取；采用基于改进SK-4PCS （semantic-keypoint-based 4-points congruent sets）的粗配准和基于Point-to-Plane ICP （iterative closest point）的精配准进行空载和满载两期点云由粗到精的高效配准，设计实现了一种利用LiDAR （light detection and ranging）点云数据进行船载砂石自动测算的系统. 采集了江西南昌赣江运砂船数据进行实验验证，从扫描到出结果一艘船的砂石体积自动测算时间少于2 min，同船多次测算结果最大相对误差小于1.00%，砂石体积与实际真值相比的最大误差小于2.00%，满足实际业务需求.      

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

Characteristics analysis for travel behavior of transportation hub passengers using mobile phone data

The travel behavior of passengers from the transportation hub within the city area is critical for travel demand analysis, security monitoring, and supporting traffic facilities designing. However, the traditional methods used to study the travel behavior of the passengers inside the city are time and labor consuming. The records of the cellular communication provide a potential huge data source for this study to follow the movement of passengers. This study focuses on the passengers’ travel behavior of the Hongqiao transportation hub in Shanghai, China, utilizing the mobile phone data. First, a systematic and novel method is presented to extract the trip information from the mobile phone data. Several key travel characteristics of passengers, including passengers traveling inside the city and between cities, are analyzed and compared. The results show that the proposed method is effective to obtain the travel trajectories of mobile phone users. Besides, the travel behavior of incity passengers and external passengers are quite different. Then, the correlation analysis of the passengers’ travel trajectories is provided to research the availability of the comprehensive area. Moreover, the results of the correlation analysis further indicate that the comprehensive area of the Hongqiao hub plays a relatively important role in passengers’ daily travel.

     

不锈钢车体钝化工艺研究

针对轨道交通车辆在制造过程中,不锈钢车体表面的钝化膜因机加工、焊接等因素可能遭到破坏,导致不锈钢车体防腐能力下降的情况,详细介绍了不锈钢车体的钝化原理、钝化工艺及钝化效果的检测方法。经过柠檬酸钝化液钝化处理后,可有效去除车体表面游离铁和其他杂质,车体表面颜色均匀一致,提高了不锈钢车体的耐蚀性和美观性。     

Subjective-utility travel time budget modeling in the stochastic traffic network assignment

ABSTRACT

In this article, we propose a new model called subjective-utility travel time budget (SU-TTB) model to capture travelers' risk-averse route choices. In the travel time budget (TTB) and mean-excess travel time (METT) model, a predefined confidence level is needed to capture the risk-aversion in route choice. Due to the day-to-day route travel time variations, the exact confidence level is hard to be predicted. With the SU-TTB model, we assume travelers' confidence level belongs to an interval that they may comply with in the route choice. The two main components of SU-TTB are the utility function and the TTB model. We can show that the SU-TTB can be reduced to the TTB and METT model with proper utility function for the confidence levels. We can also prove its equivalence with our recently proposed nonlinear-expectation route travel time (NERTT) model in some cases and give some new interpretation on the NERTT with this equivalence. Finally, we formulate the SU-TTB model as a variational inequality (VI) problem to model the risk-averse user equilibrium (RAUE), termed as generalized RAUE (GRAUE). The GRAUE is solved via a heuristic gradient projection algorithm, and the model and solution algorithm are demonstrated with the Braess's traffic network and the Nguyen and Dupuis's traffic network.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

羟基喜树碱对人胆管癌QBC939裸鼠移植瘤PS2、COX-2的影响

目的探讨羟基喜树碱对人胆管癌QBC939裸鼠移植瘤的乳癌相关肽(PS2)、环氧合酶-2(COX-2)的影响,分析PS2、COX-2与肿瘤发生、发展的关系。方法建立人胆管癌QBC939细胞株裸鼠皮下移植瘤模型,将30只裸鼠随机分成对照组、羟基喜树碱低剂量组和羟基喜树碱高剂量组,观察移植瘤体生长情况,RT-PCR法检测瘤体内PS2、COX-2 mRNA表达。结果与对照组比,羟基喜树碱低、高剂量组都可使移植瘤体的PS2 mRNA表达增高;COX-2 mRNA表达降低,且瘤体生长减慢,与对照组比较差异有统计学意义(P<0.01)。结论羟基喜树碱可降低移植瘤COX-2 mRNA表达,增高移植瘤体的PS2 mRNA表达,并使人胆管癌裸鼠移植瘤生长减慢。