全承载式车身结构浅析

简要说明了客车全承载车身技术的重要性和全承载车身的优越性；阐述了全承载车身的发展历程和在我国的应用现状，最后详细说明了全承载车身结构的特点及优点，使我们对于全承载车身结构技术有了一个更全面的认识。     

基于时空GPSO-SVM的短时交通流预测

为了提高城市道路短时交通流预测的精度,提出了一种基于时空遗传粒子群支持向量机的短时交通流预测模型.通过主成分分析法对路网原始交通流量进行时空相关性分析,用较少的主成分代替原始交通流量并作为预测因子,在粒子群算法中引入遗传算法的交叉和变异因子,避免粒子群算法陷入局部最优.利用改进后的粒子群算法优化支持向量机参数,得到最优的支持向量机模型,并实现城市道路的短时交通流预测.以长春市路网的实测数据为基础进行了实例验证,结果表明,优化支持向量机参数时,遗传粒子群算法不会陷入局部最优,优化效果更好;与粒子群支持向量机模型和遗传粒子群支持向量机模型相比,所提出预测模型的相对误差波动较稳定,平均预测精度分别提高了4.96%和3.41%.     

超大跨径斜拉桥钢桥面板疲劳损伤监测与断裂力学研究

为研究超大跨径斜拉桥钢桥面板的疲劳损伤问题,本文以某斜拉桥为工程背景,对实桥进行了现场疲劳损伤监测与分析,并基于断裂力学的三维裂纹扩展模型,对钢箱梁顶板-U肋和横隔板-U肋等焊接细节进行了数值仿真与研究。结果表明：实桥顶板-U肋焊缝细节高应力幅(大于10MPa)循环次数与疲劳损伤度明显低于横隔板-U肋细节,横隔板-U肋焊缝最大应力幅达到75~90MPa,顶板-U肋焊缝最大应力幅为15~30MPa,横隔板-U肋焊缝细节处裂纹数量远大于顶板-U肋焊缝细节处裂纹数量;顶板-U肋焊缝裂纹在扩展过程中基本保持平面,裂纹扩展有先沿焊缝方向纵向扩展,再向深度方向扩展的趋势;横隔板-U肋焊缝焊趾处裂纹先沿初始裂纹深度方向在横隔板扩展,再向横隔板厚度方向扩展,焊趾处裂纹先向U肋厚度方向扩展,后沿初始裂纹长度方向顺桥向扩展;在初始裂纹尺寸与荷载条件相同的情况下,顶板-U肋焊缝焊趾处裂纹扩展速度大于焊根处裂纹扩展速度,横隔板-U肋焊缝焊趾处裂纹扩展速率大于横隔板焊趾处裂纹扩展速率。     

A new model for temporal–spatial stochastic analysis of vehicle–track coupled systems

The vehicle–track coupled system has a random nature in the time–space domain. This paper proposes a computational model to analyse the temporal–spatial stochastic vibrations of vehicle–track systems, where the vehicle–track system is divided into a vehicle subsystem, track subsystem, and interfacial subsystem between the wheel and rail. In this model, the time-varying randomicity of dynamical parameters of the vehicle system, correlation, and randomness of the track structural parameters in the time–space joint dimensions, and randomness of the track random irregularities are considered. A probability dimension-reduction method was used to randomly combine different random variables. Furthermore, the probability density evolution method was applied to solve the delivery problem of probabilities between excitation inputs and response outputs. The temporal–spatial stochastic vibrations of the vehicle–track system with different coefficients of variation were studied, in which we assumed that the dynamic parameters obeyed the normal distribution, and the stochastic simulation method of the track random irregularities is probed into. The calculated results from this model are consistent with the actual measured results and physical conceptions. Thus, the temporal–spatial stochastic evolutionary mechanism can be explored, and the limits of dynamic indices can be formulated by using this developed model.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

基于多目标优化的兴趣点指路标志布设模型

在指路标志的工程应用中,常要为兴趣点规划一条布设指路标志的指引路径.首先,基于道路网络的拓扑表达,考虑指引路径的长度、交通量和设置指路标志的数量,定义了衡量指引路径优劣的多目标搜索路径度量值.其次,以网络分析为基础,建立了搜寻最优指引路径的模型,从给定入口开始,以广度搜索算法在路网上搜索,并动态更新搜索路径的度量值,直至获取优化的指引路径.最后,以广州大学城为试验区域,利用上述模型计算得到了从南沙港快线出口到中山大学的指路标志布设的规划路径.对比规划路径与最短路径的多目标优化度量值表明:规划路径兼顾了布设路径的便捷性和指路标志牌布设成本的特点,模型是可行有效的.     

PEM燃料电池电堆低温起动试验

为评价不同参数对PEM燃料电池电堆低温起动性能的影响,搭建了燃料电池电堆低温起动试验平台,对5 kW燃料电池电堆在-5℃、-10℃和-15℃下的低温起动性能进行了试验研究。结果表明,在低温下恒电压模式比恒电流模式更有利于电堆升温;电堆起动电压为30 V时升温速度快于40 V和20 V时;初始温度越低时电堆升温速率越慢。另外,经过低温起动后电堆性能发生了衰减,电镜扫描结果也显示经过低温起动后电堆质子交换膜局部出现了破损,应采取措施减缓低温起动对电堆的损伤。     

评价重型车用柴油机排放的13工况测试循环和欧洲稳态测试循环的对比

基于同一组增压中冷重型车用柴油机排放试验数据，采用拟合插值的方法得到了13工况循环和欧洲稳态循环两种不同测试循环的比排放数据。利用分担率和加权比排放数据分析了上述两种测试循环的不同点。指出了在实行欧Ⅲ排放法规后对车用柴油机进行排放优化的策略。     

智能车辆机器视觉发展近况

简要回顾了机器视觉的早期发展，从简单的特定场合应用到模拟人眼的复杂系统设计，介绍了机器视觉产品在智能汽车上的应用情况，分析了世界各国在车用机器视觉技术领域研究开发情况以及未来发展趋势。     

柴油、乳化油和甲醇喷雾燃烧光强波的研究

探讨了柴油机燃烧光强波的性质。在不同压力、氧浓度的条件下，对柴油、乳化油、甲酵喷雾的燃烧光强波进行了测量分析。结果表明，柴油机的燃烧光强波所反应的是火焰内碳粒的氧化历程。对于不同的燃料，燃烧光强波的强弱并不仅仅取决于火焰中碳粒的数量，同时还取决于火焰中的氧浓度。