车辆高速行驶安全的思考

分析了轮胎等汽车部件对行车安全的作用，论述了对ABS和车轮定位参数日常检测的必要性．介绍了电涡流中央制动器的制动原理和使用成本。     

全承载式车身结构浅析

简要说明了客车全承载车身技术的重要性和全承载车身的优越性；阐述了全承载车身的发展历程和在我国的应用现状，最后详细说明了全承载车身结构的特点及优点，使我们对于全承载车身结构技术有了一个更全面的认识。     

混凝土箱梁设计参数对温度效应的影响

在对水府庙混凝土箱梁桥温度场的实测和分析基础上,进行设计参数的研究,包括箱梁翼缘悬臂长度、腹板高度和桥梁轴线方位角对温度场和温度应力的影响,得到最大横向温差与（腹板高度/翼缘悬臂长度）的曲线图.     

轻型汽油车工况法排放检测方法相关性研究

研究了任用轻型汽油车稳态ASM、瞬态IMl95、GB18352．1—2001要求的全工况、GB18352．1—2001中的城市工况以及城市工况的第一个循环工况共5种不同的排放检测方法的相关性。测试并分析了3台本田雅阁车辆在这5种排放检测方法下的排放特性。结果表明，瞬态排放检测方法比稳态ASM方法能较全面地反映车辆的技术状态，瞬态IM195与GB18352．1—200l中城市工况检测方法的相关性较高，其中HC与NOx高于90％，CO也达57％以上。     

基于CAN通信的电动汽车上位机系统开发

开发一种基于CAN通信的电动汽车上位机系统,能够对整车所有CAN节点的数据进行采集显示,并且能够与多个关键零部件进行数据交互,跨零部件进行数据分析.可用于样车的快速调试及售后疑难故障处理.     

基于CAN通信的电动汽车上位机系统开发

开发一种基于CAN通信的电动汽车上位机系统,能够对整车所有CAN节点的数据进行采集显示,并且能够与多个关键零部件进行数据交互,跨零部件进行数据分析.可用于样车的快速调试及售后疑难故障处理.     

轻型商用车集成式电子液压制动系统助力策略设计

伴随轻型商用车电动化的发展,用于轻型商用车的线控制动技术得到发展,针对线控制动技术中的集成式电子液压制动系统,提出一种基于模糊PI控制反应盘主副面位移差的制动助力方法.通过实车验证表明:实际反应盘主副面位移差能够快速跟随目标曲线,制动过程平顺,具有实用性.     

A new model for temporal–spatial stochastic analysis of vehicle–track coupled systems

The vehicle–track coupled system has a random nature in the time–space domain. This paper proposes a computational model to analyse the temporal–spatial stochastic vibrations of vehicle–track systems, where the vehicle–track system is divided into a vehicle subsystem, track subsystem, and interfacial subsystem between the wheel and rail. In this model, the time-varying randomicity of dynamical parameters of the vehicle system, correlation, and randomness of the track structural parameters in the time–space joint dimensions, and randomness of the track random irregularities are considered. A probability dimension-reduction method was used to randomly combine different random variables. Furthermore, the probability density evolution method was applied to solve the delivery problem of probabilities between excitation inputs and response outputs. The temporal–spatial stochastic vibrations of the vehicle–track system with different coefficients of variation were studied, in which we assumed that the dynamic parameters obeyed the normal distribution, and the stochastic simulation method of the track random irregularities is probed into. The calculated results from this model are consistent with the actual measured results and physical conceptions. Thus, the temporal–spatial stochastic evolutionary mechanism can be explored, and the limits of dynamic indices can be formulated by using this developed model.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

小直径盾构施工中管片纵向应力监测研究

为了探索小直径盾构法隧道在施工过程中管片纵向应力的变化规律,对北京槐房再生水厂污水隧道管片纵向应力进行了现场监测:将第976环、第1 054环管片分别设为第1和第2监测断面,2监测断面各预埋5个纵向应力计,各监测断面从本监测断面管片安装后即开始监测,当盾构掘进至第1 129环时停止监测。研究表明:1)在管片离开盾尾50环后,其纵向应力波动值小于管片拼装期间应力值的5%。2)在盾构掘进期间,管片距离盾构越远,其纵向压应力值越小。3)在管片拼装期间,管片距离盾构越远,其纵向压应力经历了先增大后减小的过程。4)管片距离盾构108环后,该管片纵向压应力趋近于0.2~0.3 MPa。5)随着盾构推进,管片纵向应力经历了4个阶段的变化过程,即周期性剧烈波动阶段—动态稳定阶段—逐渐衰减阶段—趋于稳定阶段。