大型船舶辅机尾气排放测试系统研究

船舶在岸时电力供应主要来源于船舶辅机,因此在岸船舶尾气排放来自于船舶辅机,目前船舶排放相关研究多集中于船舶排放清单,对船舶实际航行中实际排放测试研究较少,船舶辅机实际排放也没有引起重视。该文通过对测试仪器的选型以及测试系统的搭建,构建出一套检测大型船舶辅机尾气排放的PEMS( 车载排放测试系统);在实际船舶辅机排放测试中测得某在岸船舶在300kw和600kw两个工况下NOX,CO,CO2以及颗粒物的排放特性,并对测试工况对排放特征的影响进行了分析。     

直升机舰上起降安全的影响因素研究

舰载直升机的起降安全涉及到舰机两方面,且影响因素较多。本文首先对舰载直升机起降安全因素进行了系统分析,梳理了其关键影响因素舰船空气流场中各特性参数对直升机操作性能的影响。然后介绍了用于舰船空气流场测量的三种典型方法,对舰船空气流场的深入研究有重要指导意义,并可为机舰动态配合研究提供参考。     

B-60型干舷散货船甲板货装载设计

随着航运市场的持续低迷,BDI指数持续走低,全球散货船市场深受运力过剩和货运需求不足影响,越来越多的船东希望在散货船增加甲板货装载,以拓展散货船的利润空间,提高船舶经济效益。在散货船甲板装货,必将对船舶甲板载荷、稳性性能、视线等产生影响,需要在原有船舶设计的基础上,增加对甲板载荷、稳性计算等方面的考核。以某B-60型干舷散货船为例,详细阐述散货船装载甲板货的设计分析。     

载人潜水器布放回收系统分析与研究

以"向阳红09"号船为例,全面介绍了载人潜水器的布放回收系统,包括尾部A架、运移轨道车和拖曳绞车。通过对布放回收系统的功能、系统组成和主要规格参数的分析与研究,对使用中的经验和教训的反思,为目前载人潜水器的布放回收系统的使用、操作规程、维护、保养等提出建议,同时也可以作为新载人潜水器布放回收系统的设计参考。     

油船底边舱下折角结构加强多方案优化设计

协调共同规范(CSR-H)对油船货舱区底边舱下折角细网格直接强度分析和精细网格疲劳强度分析提出了强制要求。以某大型油船货舱底边舱下折角有限元计算为例,探讨了四种货舱区底边舱下折角结构加强方案,为后续符合CSR-H规范的油船底边舱下折角结构设计提供参考。     

Incorporating the extended theory of planned behavior in a school travel mode choice model: a case study of Shaoxing,China

Travel to and from school can have social, economic, and environmental implications for students and their parents. Therefore, understanding school travel mode choice behavior is essential to find policy-oriented approaches to optimizing school travel mode share. Recent research suggests that psychological factors of parents play a significant role in school travel mode choice behavior and the Multiple Indicators and Multiple Causes (MIMIC) model has been used to test the effect of psychological constructs on mode choice behavior. However, little research has used a systematic framework of behavioral theory to organize these psychological factors and investigate their internal relationships. This paper proposes an extended theory of planned behavior (ETPB) to delve into the psychological factors caused by the effects of adults’ cognition and behavioral habits and explores the factors’ relationship paradigm. A theoretical framework of travel mode choice behavior for students in China is constructed. We established the MIMIC model that accommodates latent variables from ETPB. We found that not all the psychological latent variables have significant effects on school travel mode choice behavior, but habit can play an essential role. The results provide theoretical support for demand policies for school travel.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.