Reliability assessment of maintained ship hulls with correlated corroded elements

This paper reviews the factors that affect the corrosion rate of the ship hull girder. It is shown that corrosion rates vary as a function of the location of the element in the structure, of the ocean area and type of ballast tank and steel. However, the corrosion rate in elements that are subjected to similar conditions is highly correlated.

A time-variant formulation is proposed including the correlation between the corrosion rates in neighbouring elements in modelling the degrading effect that corrosion has on the reliability of ship hulls. The effect of corrosion is represented as a time-dependent decrease of plate thickness that affects the midship section modulus. One repair policy was considered and the example results show the effect of plate replacement when its thickness reaches 75% of the original value. The results also illustrate how the limit value of the thickness in the repair criteria influences the reliability and the decision about repair actions. This is also shown for the effect of different corrosion rates, inspection intervals, and allowable stresses.     

Influence of seabed sand wave on hydrodynamic performance of submersible北大核心CSCD

[目的]研究潜器在海底沙波地形干扰下的水动力特性。[方法]基于计算流体力学(CFD)方法,使用STAR-CCM+软件并结合重叠网格方法对潜器经过海底沙波的过程进行模拟,计算潜器阻力系数和升力系数在此过程中的变化。[结果]结果表明,当潜器近海底航行时,沙波地形会对潜器产生一定的干扰,当艏部运动至波峰附近时,负升力出现最大值,当艉部运动至波峰附近时,阻力出现最大值;在不同航速下,潜器表面压力分布规律的不同会导致升力系数的变化规律不同;随着近海底距离的减小,海底沙波对潜器阻力和升力变化影响显著,当H/D>5时,海底沙波对潜器阻力和升力的影响可以忽略。[结论]所做研究可为潜器的安全及操纵性能提供一定的参考。     

Characteristics and calculation method of sound radiation of cylindrical shell with porous sound-absorbing material under acoustic excitation北大核心CSCD

［Objective］This paper aims to study the characteristics and calculation method of the vibration and sound radiation of single ring-stiffened cylindrical shells with porous fiber composite materials installed in the inner wall under acoustic excitation. ［Method ］ Based on the equivalent fluid theory model of Johnson–Champoux–Allard (JCA) and the transfer matrix of the multilayer medium, a theoretical formula of the sound absorption coefficient of multilayer sound absorption structures is derived. The three methods for calculating the vibration and sound radiation of a single ring-stiffened cylindrical shell with porous fiber materials under acoustic excitation, namely acoustic solid modeling of porous media, finite element model combined with theoretical formula and imposition of impedance boundary on sound absorption coefficient, are then verified and compared. Finally, the influences of sound-absorbing material's thickness, backed-air gap, static flow resistance, and material arrangement order on the acoustic absorption performance of the cylindrical shell are investigated. ［Results］The results show that laying porous fiber composite materials on the cylindrical shell internally can reduce the vibration and acoustic radiation of cylindrical shell structure. The sound absorption coefficient curve can quickly and effectively predict the resulting trend of the vibration and sound radiation of the cylindrical shell. ［Conclusion］The acoustic absorption performance of sound absorption structures can be effectively improved through the rational design of their properties and arrangement order of the sound-absorbing materials in order to achieve the purpose of vibration and noise reduction. © 2023 Chinese Journal of Ship Research. All rights reserved.     

A line impedance stabilization network for pulse current injection北大核心CSCD

［Objective］Aiming at the deficiency of the existing line impedance stability network (LISN) in the electromagnetic pulse protection capability, a LISN suitable for the pulse current injection (PCI) test of electrical and electronic equipment is proposed. ［Methods］Aiming at the characteristics of high peak value and fast rise of the pulse current in PCI testing, the circuit structure and physical structure of the LISN are improved on the existing basis through PSpice time-domain and frequency-domain simulation combined with engineering design requirements, thereby giving it good nanosecond pulse protection performance and impedance stability at the same time. Pulse current protection performance test and impedance curve test experiments are then designed and carried out.［Results］The experimental results show that the improved LISN can attenuate the injected pulse current by 60 times, while the error of its impedance curve is less than 5% compared with the Type 5 µH LISN in GJB 151B-2013. ［Conclusions］The proposed LISN has good impedance stability and decoupling ability, and can be used in the PCI testing of electrical and electronic equipment in order to protect the power supply and improve the repeatability of testing. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Overview of intelligent ship route optimization methods北大核心CSCD

智能船舶航线优化在学术界和工业界均受到越来越多的关注。针对智能船舶航线优化问题,从航线设计方法和航线优化算法这2个层面,分别阐述各种设计方法和优化算法的特点。结合近5年来的最新研究成果,在分析国内外智能船舶航线优化技术发展现状的基础上,将航线设计方法归纳为3种,即基于气象数据的航线优化、基于油耗模型的航线优化以及基于航线库或航路点库的航线优化,剖析其技术内涵及应用情况;深入分析改进的等时线法、动态规划法、图形搜索算法、智能算法、人工智能和机器学习算法的特性及不足,总结归纳将各类算法应用于智能船舶航线优化时存在的主要问题。最后,简要展望智能船舶航线优化的发展趋势,为未来在该领域的研究提供一定的思路。     

茂县隧道挤压性变形段锚杆作用效果分析

针对茂县隧道穿越活动断裂带及其影响区所遇到的挤压性变形问题,通过对1号斜井及左洞前期施工变形统计分析,以及现场锚杆施工存在的问题,针对性地提出锚杆施工工艺的改进措施,并开展长期跟踪监测。研究结果表明:锚杆工艺改进前,1号斜井和左洞收敛均值分别为689.2 mm和624.8 mm,且1号斜井变形不收敛,左洞收敛时间达6个月;锚杆工艺改进后,左、右洞水平收敛均值分别为320.4 mm和141.2 mm,相比左洞工艺调整前分别下降77.4%和40.6%,且收敛时间缩短至约4个月;按"孔腔通畅+非收缩浆液+可简单验证和不可逆转灌注满浆"的思路综合性改进锚杆施工工艺可显著提升锚杆质量,发挥其在抑制隧道挤压性变形中应有的作用。     

嵌入式车载流媒体播放终端设计与实现

本文设计并实现了基于Au1250处理器的嵌入式流媒体播放终端.播放系统由流传输设施和解码终端组成.流传输设施主要实现媒体数据的传输,解码终端负责流媒体的音频、视频解码及播出.流传输层利用JRTPLIB开发库实现,解码终端采用嵌入式技术,通过MAI Engine实现媒体数据的解码播放.对于文本数据,直接交由上层应用程序的GUI显示.播放终端与媒体服务器之间通过以太网相连,采用RTP协议进行数据通信.     

Deep foundation pit excavation procedure optimization considering creep deformation on nearby metro tunnelEI北大核心

Research purposes: The existing researches about excavating procedures of deep foundation pit on nearby metro tunnel in soft formation are lack of systematicness, and creep characteristics of soft clay are not usually taken into consideration. This paper takes Qianhaiwan station of Metro Line 11 in Shengzhen as engineering background and considers creep characteristics in sludge formation. The influence of step excavation in the transversal, longitudinal and vertical directions on the deformation of foundation pit and nearby subway tunnel are simulated, which may be expected to provide theoretical basis for choosing foundation pit excavation procedure of Qianhaiwan station. Research conclusions: (1) The segment far away from tunnel should be excavated firstly when only transversal step excavation was undertaken along the horizontal direction of foundation pit. (2) The maximum horizontal displacement of the piles show exponential relations with the number of segments when step excavation of foundation pit was undertaken in vertical and transversal or longitudinal. If thickness of every step excavation was limited in 1.5~2 m, the horizontal displacement of the pile near tunnel can be reduced about 9 percent when there is no horizontal step excavation. (3) Transversal step excavation with segments far from tunnel excavated firstly was found to be the best step excavation method under the same condition of step number and support, and longitudinal and transversal step excavation followed while longitudinal step excavation was the last. (4) The research results have guiding significance for foundation pit of Qianhaiwan station and similar projects.     

Regularity analysis on transient over-voltage of grounding grid by lighting strokes in substationsEI北大核心

Research purposes: Lightning has been one of the important factors endangering safe and reliable operation of the railway. The grounding grid performance plays a particularly important role in lightning protection. In this paper, the author has established a grounding grid transient model by the electromagnetic transient analysis software and intended for quantitative analysis of typically grounding grid layout in engineering practice, to lay important theoretical basis for future lightning protection and grounding. Research conclusions: (1) The results show that the ground potential is significantly affected by the soil resistivity, lightning current amplitude and the mesh size. With increase of the soil resistivity and lightning current amplitude, the ground potential at the point of the lightning current injection will significantly improve, but due to the spark discharge of the soil. The ground potential does not increase exponentially with potential lightning current amplitude. The smaller the mesh size, the better the ground potential attenuation. For example of the lightning current 20 kA and the soil resistivity 100 Ω·m, the ground potential of the 5 m×5 m mesh decreases 22.3% compared with the 10 m×10 m mesh. (2) The study finds that the ground potential attenuation away from the lightning strike point at 15 m basically reaches the maximum, which is about 89%. And the degree of attenuation is independent of lightning current amplitude. (3) The results are mainly used for optimization program and design fields on substation lightning protection and grounding.