水平小净距隧道中夹岩安全系数法研究与应用北大核心CSCD

中夹岩柱是小净距隧道围岩稳定控制的关键部位,判别中夹岩的安全性是工程设计和施工过程中的重难点。文章通过分析不同围岩级别、埋深情况下中夹岩的破坏模式,建立Ⅳ级围岩条件下水平小净距隧道中夹岩力学分析模型,并确定中夹岩破裂面位置。根据中夹岩上部滑块体形状的不同分为两种情况,通过边坡稳定性原理、极限平衡假设及普氏压力拱理论推导中夹岩上部滑块体的抗滑力、下滑力以及安全系数的计算公式,从而建立起评判中夹岩安全性的安全系数法,并结合数值模拟对其进行验证。将经验证后的安全系数法应用于某实际隧道工程,判断其中夹岩安全性,得出该隧道中夹岩破坏临界厚度为6 m,进而对6 m以下的中夹岩使用锚杆进行加固。     

Prediction analysis on propulsion shafting load based on grey system theory北大核心CSCD

[Objective]The propulsion shafting system is an important part of a ship, and the bearing load directly affects its operating state and service life. In this paper, bearing load under hull deformation is studied using grey system theory. [Method] First, according to the empirical formula of the relative displacement of each bearing caused by the deformation of the hull of a 57 000 DWT oil tanker, the relative displacement of each bearing is calculated and input into a finite element model, and the load value of each bearing is output. On this basis, grey relationship analysis of grey system theory is introduced to study the influence degree of stern bearing displacement on the load of each bearing, and the relative change of the load of each bearing caused by the displacement of the stern bearings is analyzed. A GM (1,1) prediction model is then established for the bearing load considering the bearing displacement conditions, and the hull deformation-fitting and prediction of each bearing load are made. [Results]The results show that grey relationship analysis can effectively reflect the influence of hull deformation on bearing load. The GM (1,1) prediction model has high accuracy and prediction errors less than 6.0%, and the model test indexes can represent the accuracy of the prediction. [Conclusion]Grey system theory is effective and practical in research on propulsion shaft load. It can accurately predict bearing load under bearing displacement, giving it certain reference value for research on bearing load under actual sailing conditions. © The Author(s) 2022.     

�����г�ʱ��ɿ��Եij����Ż�����

行程时间的不确定性是影响货运车队路径选择的一个重要因素，特别是对于要求货物准时送达的配送任务（例如商品混凝土的配送），提出了在车辆调度中考虑由拥挤路段交通流量波动引起的行程时间不确定性的方法，建立了考虑行程时间可靠性要求的车辆优化调度数学模型，给出了相应的启发式算法，通过算例介绍了该模型和算法的应用。结果表明配送总成本随行程时间可靠性要求的提高而增加。     

HMB Reflectors: A New Horizontal Retro‐reflecting System to Improve Safety at Pedestrian Crossings

Abstract

Each year more than 1000 pedestrians are injured in accidents on pedestrian crossings in Switzerland. The accidents often occur in darkness, twilight or poor visibility during rain at locations without sufficient public street lighting because vehicle drivers notice the pedestrian crossing too late or overlook it altogether. Pedestrian crossings can be made significantly easier for vehicle drivers to recognize at night and in poor visibility by means of HMB reflectors. When crossing sites are made more conspicuous with high horizontal retro‐reflecting markers, the readiness to stop increases. The reflectors can thus contribute to improving road safety at pedestrian crossings. This new low‐cost measure has a wide range of applications. The new reflector system is currently gaining ground in Switzerland and several other European countries.     

Traffic Noise in Europe: A Comparison of Calculation Methods,Noise Indices and Noise Standards for Road and Railroad Traffic in Europe

The demand for inland freight transport in Europe is mainly met by road transport, leading to unsustainable impacts such as air pollution, greenhouse gas emissions and congestion. Since rail transport has lower externalities than road transport, a modal shift from road to rail is an accepted policy goal for achieving a more sustainable and competitive transport system. However, intermodal road–rail transport is mainly competitive for long-distance transport, and as a consequence, the potential for modal shift is limited. The cost efficiency of road–rail intermodal transport is particularly sensitive to pre- and post-haulage (PPH) costs, since this activity typically has a larger cost compared with its share of the total distance in the transport chain. For intermodal transportation over shorter distances, for example, below 300 km and where there are substantial PPH activities at both ends of the chain, the competitiveness of the intermodal transport system compared with that of direct road is low. Improving the efficiency of PPH activities is, therefore, of utmost importance for the competitiveness of the intermodal transport system. This paper looks into the issue of improving the cost efficiency of an intermodal transport chain by implementing an innovative and flexible legal framework regarding the PPH activities in the chain. By extending the legal framework with exemptions for longer vehicles in PPH, the cost efficiency could be greatly improved. The purpose of such a framework is to allow and enable, for PPH exclusively, the use of 2?×?40 foot or even two semi-trailers using only one vehicle in the context of the Swedish regulatory framework. This paper develops a strategic calculation model for assessing and investigating the consequences of such a framework and investigates the framework's potential in terms of cost efficiency. The model in combination with a sensitivity analysis of input variables gives a comprehensive understanding of the effects of PPH under different circumstances. From the results, it is evident that there are substantial positive effects associated with a PPH framework of longer vehicles. Results indicate that a typical shipper may experience cost reductions of about 5–10% of the total costs of the intermodal transport chain. In summary, a more innovative and flexible legal framework regarding vehicle length in the PPH links can contribute to a greater modal shift, improved cost efficiency and more environmentally friendly transportation systems.     

Random regret minimization or random utility maximization: an exploratory analysis in the context of automobile fuel choice

Interest in alternative behavioural paradigms to random utility maximization (RUM) has existed ever since the dominance of the RUM formulation. One alternative is known as random regret minimization (RRM), which suggests that when choosing between alternatives, decision makers aim to minimize anticipated regret. Although the idea of regret is not new, its incorporation into the same discrete choice framework of RUM is very recent. This paper is the first to apply the RRM‐model framework to model choice amongst durable goods. Specifically, we estimate and compare the RRM and RUM models in a stated choice context of choosing amongst vehicles fuelled with petrol, diesel and hybrid (associated with specific levels of fuel efficiency and engine capacity). The RRM model is found to achieve a marginally better fit (using a non‐nested test of differences) than its equally parsimonious RUM counterpart. As a second contribution, we derive a formulation for regret‐based elasticities and compare utility‐based and regret‐based elasticities in the context of stated vehicle type choices. We find that in the context of our choice data, mean estimates of elasticities are different for many of the attributes and alternatives. Copyright © 2011 John Wiley & Sons, Ltd.     

A dynamic route choice model for public transport networks with boarding queues

Abstract

The concepts of optimal strategy and hyperpath were born within the framework of static frequency-based public transport assignment, where it is assumed that travel times and frequencies do not change over time and no overcrowding occurs. However, the formation of queues at public transport stops can prevent passengers from boarding the first vehicle approaching and can thus lead to additional delays in their trip. Assuming that passengers know from previous experience that for certain stops/lines they will have to wait for the arrival of the 2nd, 3rd, …, k-th vehicle, they may alter their route choices, thus resulting in a different assignment of flows across the network. The aim of this paper is to investigate route choice behaviour changes as a result of the formation and dispersion of queues at stops within the framework of optimal travel strategies. A new model is developed, based on modifications of existing algorithms.     

Fatigue assessment of rear axle under service loading histories considering the strengthening and damaging effects of loads below fatigue limit

Accurately predicting the fatigue life is the basis for the reliability and lightweight design of automobile parts. However, the predicted lives under service loadings on the basis of the S-N curve from constant amplitude loads from existing methods often seems conservative compared with real lives, because of ignoring the strengthening effect of loads below fatigue limit. In this paper, a fatigue damage model, which is modification of Miner’s Rule, was established for the fatigue assessment under service loadings by means of taking into account the strengthening and damaging effects of loads below fatigue limit. Then this model and conventional Miner’s Rule are applied to the estimate the fatigue life of a torsion beam rear axle using the loading history recorded on proving ground. Finally, verification tests are performed on MTS road load simulator test bed. Results of predicted lives and fatigue tests demonstrate that the accuracy of the predicted life could be greatly improved by taking into account the strengthening and damaging effect of loads below fatigue limit.     

Development of the performance simulator for electric scooters with an in-wheel motor

Due to the increasing use of fossil fuel, carbon dioxide emission also increased and environmental problems have emerged as social issues. Accordingly, the research about electric vehicles as personal transportation has been actively performed. An electric scooter is not as complex as an automobile, but it takes a lot of time and costs to design and develop a new vehicle due to trial and error in selecting the specifications of core components according to consumer’s requirements. In this paper, a performance simulator for an electric scooter with an in-wheel motor at the rear wheel was developed and the simulation results were verified through experiments. For a longer travelling distance with the same energy source, the regenerative braking algorithm that converts kinetic energy into electric energy during braking was applied. The usefulness of the regenerative braking control algorithm was verified through various simulation results.