基于下一代网络的铁路VoIP通信关键技术研究

研究了移动IPv6工作原理和基于下一代网络的VoIP通信技术要求,分析了铁路运输系统移动无线网络接入技术特点,为高速列车以移动无线方式接入IPv6网络、实现VoIP通信提供了IP层解决方案.     

The quality of survey data: Telephone versus face-to-face interviews

Those designing surveys and producing data have always been concerned about its quality. The increasing stringency of the financial constraints which affect public authorities and the increased scope of involvement in the regulation of urban travel has led us to pay even greater attention to the quality of data. This issue is frequently covered in the literature on survey methods. However, comparisons between different survey methods are more rarely conducted. The decision to conduct such an analysis is partly the result of the development of telephone use to the detriment of other survey modes in many countries and also the development of Computer-Aided Telephone Interviewing (CATI) which facilitates the running and monitoring of the survey.This paper examines several aspects of this question in order to compare the performance of telephone and face-to-face interviews. The first aspect is the representativeness of the sample, and therefore relates mainly to the issue of nonresponses and the choice of a sample base. The second concerns the accuracy of the information and involves the choice of a survey area and the recording of all trips, including short-distance travel. Finally, the quality of data is obviously determined by the quality of the responses given by those interviewed.The answers we give frequently depend on the objective of the surveys, which leads us to put forward a table which summarizes the performance of telephone and face-to-face interviews on the basis of the main objective of the survey. Broadly, the telephone seems to be the favoured tool for surveys in the area of transport planning and surveys which aim to provide data for forecasting models, mostly on the grounds of cost. However, face-to-face techniques are often preferred for surveys which aim to discover and analyze the factors which explain individual travel behaviour.     

数字图像技术在露石混凝土路面中的应用

应用数字图像技术,将普通数码相机拍摄的露石水泥混凝土路面照片进行处理,根据图像的灰度值变化分析得到露石混凝土路表面的构造深度,并通过与常规方法的比较表明,此方法测量的路表面构造深度结果可靠,操作简单,可以在分析露石混凝土路面粗糙的表面特征上应用。     

基于一次转移原理的限流器研究

研究了基于一次电流转移的限流器方案,它由快速开关和PTC电阻并联组成。限流过程电流由快速开关直接转移至PTC电阻。研究表明,在电流向PTC电阻转移的过程中,电弧电压和PTC电阻值对限流效果有重要影响。     

从广州地铁信号系统运营情况分析CBTC在地铁运营中的应用

从广州地铁各条线路信号系统运营情况出发,针对基于无线通信的列车控制系统（CBTC）,介绍了该系统的基本原理,分析了CBTC的技术难点,并说明了CBTC对无线局域网的要求。最后从运营的角度考虑,提出了一些在CBTC中提高运营质量的方法和建议。     

沥青路面平整度影响因素分析及提高措施

沥青路面平整度影响因素分析及提高措施。     

地铁明挖车站-市政桥梁合建结构的关键技术研究

地铁明挖车站和市政桥梁合建时,为同时满足2种不同类型构筑物的安全和使用功能要求,需对其中的关键技术难题进行分析研究,以采取合理可行的结构形式。依托成都地铁白佛桥明挖车站与其上部市政桥梁的建设,总结国内类似工程经验,根据工程特点确定桥梁承台与地铁车站顶板进行固结连接,桥梁跨度与地铁车站框架柱跨进行匹配,同时桥墩避开地铁车站端头井、换乘节点等复杂结构受力区域进行布设; 建立三维荷载-结构模型,计算分析上部桥梁荷载对地铁车站结构构件内力及变形的影响,并根据计算结果,对桥墩影响范围内的车站顶底板和侧墙的厚度及配筋进行增强,桥墩轴线下方的地铁车站框架柱采用型钢-混凝土组合结构,以满足合建结构的承载能力、变形、裂缝控制等要求。另外,选取LS-DYNA软件,采用非线性时程分析法对合建结构进行抗震计算分析,计算结果显示： 车站板、墙、梁等构件在支座处出现应力集中现象,各结构构件的承载力强度及变形均满足规范要求。     

基于岩溶分布分析的突水风险评估模型研究

为实现岩溶突水风险评估的全过程动态修正与管理,一以岩溶发育分布规律为基础,采用半定量分析方法,估计溶洞与隧道在剖面图中的相对位置距离值,二将防突水岩层安全厚度的预测划分为初步估算、二次估计和动态测算3个阶段,每个阶段均采用有效的修正方式,不断获取更加准确且适用的防突岩层安全厚度预测数值。然后,综合考虑防突岩层安全厚度以及爆破开挖扰动深度影响,提出岩溶突水风险概率等级评价标准;通过划分突水量和溶腔高水头压强的等级,提出岩溶突水风险后果等级评价标准;并以二者为基础构建岩溶突水风险等级评估矩阵。最终,构建基于岩溶分布态势与防突岩层厚度的岩溶突水风险评估模型。通过具体工程实例检验,理论结果与实际情况相对比,验证所构建岩溶突水风险评估模型的合理性与可行性。     

铁路机械动力设备技术信息管理系统的开发与应用

介绍了铁路机械动力设备技术信息管理系统的组成、主要功能、特点及应用效果。