CT reconstruction with priori MRI images through multi-group datasets expansion

Computed tomography (CT) reconstruction with a well-registered priori magnetic resonance imaging (MRI) image can improve reconstruction results with low-dose CT, because well-registered CT and MRI images have similar structures. However, in clinical settings, the CT image of patients does not always match the priori MRI image because of breathing and movement of patients during CT scanning. To improve the image quality in this case, multi-group datasets expansion is proposed in this paper. In our method, multi-group CT-MRI datasets are formed by expanding CT-MRI datasets. These expanded datasets can also be used by most existing CT-MRI algorithms and improve the reconstructed image quality when the CT image of a patient is not registered with the priori MRI image. In the experiments, we evaluate the performance of the algorithm by using multi-group CT-MRI datasets in several unregistered situations. Experiments show that when the CT and priori MRI images are not registered, the reconstruction results of using multi-group dataset expansion are better than those obtained without using the expansion.     

兰新铁路第二双线混凝土采用橡塑板保温保湿试验研究

基于对兰新铁路第二双线气候特征的分析,提出了一种综合利用橡塑板、塑料薄膜和吸水土工布的新型保温保温养护方式,并在典型区段进行了现场验证试验,通过测试不同养护方式下混凝土构件内部、表面与养护材料间温度及混凝土抗压强度和电通量等指标,研究了新型保温保湿养护的效果.结果表明:与传统保湿养护相比,新型保温保温养护方式能有效地降低混凝土内外温度受环境温度变化的影响、提高干燥、昼夜大温差气候下混凝土的强度和抗氯离子渗透性,具有良好的保温效果.     

新疆公路自然灾害评价系统构建

新疆独特的自然环境给公路建设带来很大问题,自然灾害常有发生,在传统层析-模糊评判分析方法的基础上,引入风险管理理论,对新疆山区自然灾害评价体系进行构建,从而通过定性和定量的方式对新疆公路自然灾害进行科学评价,为新疆各级部门做好公路自然灾害的防范、处理工作具有重要意义,促进新疆经济的快速发展。     

压密注浆在市政道路高填方路基处理设计中的应用探析

某市北环路工程处于平原地区,地质条件相对较好,有利于工程建设,但由于是新城区,分布有较多沟塘。该工程为水泥混凝土路面,属于刚性路面,对路基的不均匀沉降较为敏感,处理不好这些沟塘,就会产生不均匀沉降,影响道路的使用效果和寿命。压密注浆工艺近年来在建设工程领域应用较广,但还没有完整的理论体系,在公路和市政工程中的应用目前也是处在探索阶段。该工程通过方案比选最终采用了压密注浆工艺对高填方路基进行了加固处理,取得了良好的效果。     

Reliability Modeling and Maintenance Policy Optimization for Deteriorating System Under Random Shock

Performance degradation and random shock are commonly regarded as two dependent competing risks for system failures. One method based on effective service age is proposed to jointly model the cumulative effect of random shock and system degradation, and the reliability model of degradation system under Nonhomogeneous Poisson processes (NHPP) shocks is derived. Under the assumption that preventive maintenance (PM) is imperfective and the corrective maintenance (CM) is minimal repair, one maintenance policy which combines PM and CM is presented. Moreover, the two decision variables, PM interval and the number of PMs before replacement, are determined by a multi-objective maintenance optimization method which simultaneously maximizes the system availability and minimizes the system long-run expect cost rate. Finally, the performance of the proposed maintenance optimization policy is demonstrated via a numerical example.     

Novel experimental strategy for high resolution AFM imaging of membrane-associated bacterial toxins

Bacterial pore-forming toxins （PFTs） are essential virulence factors of many human pathogens. Knowl- edge of their structure within the membrane is critical for an understanding of their function in pathogenesis and for the development of useful therapy. Atomic force microscopy （AFM） has often been employed to structurally interrogate many membrane proteins, including PFTs, owing to its ability to produce sub-nanometer resolution images of samples under aqueous solution. However, an absolute prerequisite for AFM studies is that the samples are single-layered and closely-packed, which is frequently challenging with PFTs. Here, using the prototypical member of the cholesterol-dependent cytolysin family of PFTs, perfringolysin O （PFO）, as a test sample, we have developed a simple, highly robust method that routinely produces clean, closely-packed samples across the entire specimen surface. In this approach, we first use a small Teflon well to prepare the supported lipid bilayer, remove the sample from the well, and then directly apply the proteins to the bilayer. For reasons that are not clear, bilayer preparation in the Teflon well is essential. We anticipate that this simple method will prove widely useful for the preparation of similar samples, and thereby enable AFM imaging of the greatest range of bacterial PFTs to the highest possible resolution.     

米思米软件在模具工业中应用的可行性分析

本文介绍了米思米软件的创立以及三大功能,分析了该软件的优越性,得出作为标准件的全球性软件,在企业中米思米软件可以缩短设计时间,提高采购部门的效率,最终缩短整个从设计到制作的时间;在教学中米思米软件可以提高学生学习兴趣,巩固理论知识,强化实践操作,其应用前景非常广阔。     

基于BIM的公路隧道运维管理系统设计与开发

近年来,我国公路隧道建设里程快速增长,但在隧道运维管理中存在技术落后、管理人员配置不足等问题。针对管理中存在的问题,本文提出将BIM(building information modeling,建筑信息模型)引入公路隧道的运维管理,通过制定具体实施规划及设计系统架构,实现可视化的公路隧道运维管理。以浙江省41省道岭下隧道工程为依托,建立基于BIM的公路隧道运维管理平台,为公路隧道运维管理提供一种直观、便捷的管理方式,提高公路隧道的信息化管理水平。     

潮位变化对上海某越江盾构隧道变形的影响规律研究

为了探究潮位变化与越江盾构隧道的沉降和收敛变形之间的关联性,采用数据统计分析、相关性分析和周期性分析方法,对上海某越江盾构隧道的监测数据与同时期隧道上部的潮位变化进行研究分析。研究表明:1)江中段隧道在潮位变化的作用下产生均匀沉降,其波动性与潮位起伏具有近似的周期性;2)陆域段隧道沉降变化的波动性程度与河流的距离有关;3)潮位变化引起隧道管片断面的横径和竖径产生循环的收敛变形,其横径收敛变形大于竖径收敛变形。以上研究可为越江盾构隧道设计、施工和运维提供参考。     

小直径盾构施工中管片纵向应力监测研究

为了探索小直径盾构法隧道在施工过程中管片纵向应力的变化规律,对北京槐房再生水厂污水隧道管片纵向应力进行了现场监测:将第976环、第1 054环管片分别设为第1和第2监测断面,2监测断面各预埋5个纵向应力计,各监测断面从本监测断面管片安装后即开始监测,当盾构掘进至第1 129环时停止监测。研究表明:1)在管片离开盾尾50环后,其纵向应力波动值小于管片拼装期间应力值的5%。2)在盾构掘进期间,管片距离盾构越远,其纵向压应力值越小。3)在管片拼装期间,管片距离盾构越远,其纵向压应力经历了先增大后减小的过程。4)管片距离盾构108环后,该管片纵向压应力趋近于0.2~0.3 MPa。5)随着盾构推进,管片纵向应力经历了4个阶段的变化过程,即周期性剧烈波动阶段—动态稳定阶段—逐渐衰减阶段—趋于稳定阶段。