针片状指数对道砟直剪力学特性的影响

为研究针片状道砟在破碎情况下对道砟散体直剪力学特性的影响，通过进行不同工况下道砟直剪试验，从道砟散体剪切强度、变形及破碎特性对试验结果进行分析. 研究结果表明:（1） 随着针片状指数增加，道砟散体直剪力学性能下降，包括抗剪强度和内摩擦角（100 kPa下当针状指数由0分别提高到20%、40%时，抗剪强度分别降低10.9%、16.8%；片状指数由0分别提高到20%、40%时，抗剪强度分别降低14.7%、22.3%；针、片状道砟总值由0分别提高到20%、40%时，抗剪强度分别降低12.4%、18.9%）. （2） 随着针片状道砟含量增加，试样剪缩和剪胀量均降低. （3） 针片状道砟在直剪试验过程中易于发生破碎，且破碎类型多为整体断裂并伴随尖角破碎折断，显著影响有砟道床维修周期.      

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

New procedure for the analysis of speed trial results,with special attention to the correction of tidal current effect

Almost all the existing analysis methods of speed trial results were proposed before 1970s, and the actual analysis procedures are very old-fashioned with instructions like “plot the results on a chart and draw a smooth mean line”, “read a value from the mean line” and so on. Such instructions not only show up the analysis procedures old-fashioned, but also make them very ambiguous and unclear. They should be up-dated to a method which is clear not only in logic but also in calculation procedure, and also fits the present computing technology. At first, the author reviewed the major analysis methods and concluded that the logic of the up-dated analysis procedure can be composed of the logics of the existing ones. Then, the analysis procedure is composed of three stages; namely (1) correction of power and propeller revolution to the ones corresponding to no air condition, (2) correction of tidal current effect, and (3) correction of power and propeller revolution to the ones corresponding to no wind condition. For the stages (1) and (3), there seems to be no big issue except the estimation of the amount of environmentally added resistance in the stage (1). Then, the author focused on the correction of tidal current effect in this paper. For the correction of tidal current effect, the author considers the essential points for the up-date are in the direction of finding out appropriate functions for the variation of tidal current velocity and the ship speed through the water. Then, he investigated to find out such functions and made his proposal. Finally, the applicability of the new procedure is assessed by the analysis of simulated speed trial results of a VLCC.     

A finite pointset method for the numerical simulation of free surface flow around a ship

In this paper, we present a Finite pointset method (FPM) for the numerical simulation of free surface flow around a ship in calm water. It is a Lagrangian and meshless particle scheme which is applied to the projection method for the incompressible governing equations. This requires the solution of Poisson problems in each time step, so a moving least squares (MLS) interpolants is used for the spatial derivatives in order to discretize the Poisson equation with pressure-Dirichlet condition of free surface flow in meshless structure. Meanwhile, an additional problem of the periodic particle locations redistribution in the present approach is still handled by MLS interpolants. With the proposed FPM technique, problems associated with the free surface flow around a ship are circumvented. A verification of numerical modeling is made using the Wigley hull and the validity of the proposed methodology is examined by comparing the detail of wave profile and wave-making resistance with Series 60 model. The results demonstrate that FPM is able to perform efficient and stable simulations of free surface flow around a ship.     

可持续交通——各方观点和长期挑战

从交通研究者和实践者的角度出发,以可持续交通这一概念为中心展开讨论。可持续交通宽泛地反映了可持续发展在交通领域的原则。随着可持续性这一概念的外延逐渐扩大,在它的定义、应用和价值取向上出现了不同观点。着重讨论可持续交通,以及如何理解和运用可持续交通,包括:1)将可持续性或者可持续发展作为一个整体的概念,包括关于可持续性的不同方法和定义之间的冲突;2)对可持续交通以及交通领域对其理解的探索;3)使用指标来实现可持续性的应用。然后识别了通往可持续交通之路的若干挑战,包括缺乏清晰定义、可持续性的固有冲突、可持续发展的跨领域本质、各种工作框架和指标体系、可持续发展的政治因素和交通领域实践中的不同观点。基于在该课题上的研究积累,总结解决这些问题的工作框架,提出因地制宜、注重结果、整体的方法来解决可持续交通中的挑战。     

Effects of built environment and weather on bike sharing demand: a station level analysis of commercial bike sharing in Toronto

Bike Share Toronto is Canada’s second largest public bike share system. It provides a unique case study as it is one of the few bike share programs located in a relatively cold North American setting, yet operates throughout the entire year. Using year-round historical trip data, this study analyzes the factors affecting Toronto’s bike share ridership. A comprehensive spatial analysis provides meaningful insights on the influences of socio-demographic attributes, land use and built environment, as well as different weather measures on bike share ridership. Empirical models also reveal significant effects of road network configuration (intersection density and spatial dispersion of stations) on bike sharing demands. The effect of bike infrastructure (bike lane, paths etc.) is also found to be crucial in increasing bike sharing demand. Temporal changes in bike share trip making behavior were also investigated using a multilevel framework. The study reveals a significant correlation between temperature, land use and bike share trip activity. The findings of the paper can be translated to guidelines with the aim of increasing bike share activity in urban centers.     

Market structures in coastal shipping: what to expect in Canada following the Comprehensive and Economic Trade Agreement with the European Union?

After several years of negotiation between Canada and the European Union, the Comprehensive and Economic Trade Agreement (CETA) was ratified in early 2017. The regime set out by the Canadian Coasting Trade Act that reserves shipments of cargo between Canadian ports to Canadian vessels remains mostly untouched under CETA. Minor, yet potentially significant, changes to the regime are introduced by the trade agreement. Provisions are made to liberalize the repositioning of empty containers within Canada. The liberalization of public markets now allows European firms to compete in the Canadian dredging market. Finally, EU vessels can undertake some transshipment activity in Canada but this is limited to international cargo on the specific Montreal-Halifax route. The paper attempts to highlight some possible CETA’s consequences for domestic Canadian shipping markets. It uses industrial economics analytical tools drawn from a Structure-Conduct-Performance (SCP) paradigm. From a literature review, it reconstructs different cases of deregulation that occurred internationally. The observed transformations are then characterized in terms of the SCP model. The paper identifies some common impacts which occurred in different transportation industries after a deregulation process. Using these findings, it concludes by discussing potential impacts for domestic shipping markets in Canada.     

Crew resource management training in the maritime industry: a literature review

The study is based on a literature review of recent empirical research on crew resource management (CRM) training in the maritime industry, organised around what non-technical skills to learn and how. The review indicates that existing work is dominated by individualistic theories of learning with less focus on learning as a social process. Five main categories of skills that need to be trained are identified: assertiveness, decision-making, communication, situation awareness and team coordination. We argue that it is necessary to operationalise these broad concepts further, emphasising the work context and crew-specific needs. The review also shows that a combination of classroom lectures and simulator-based exercises is commonly used in maritime education and training in these skills. The learning effect seems to be suffering from training programmes that are exported ‘as is’ from aviation and not adjusted to the maritime domain or to operation-specific needs. This paper examines maritime crew resource management training from a social learning perspective, involving the view that learning is a context bound, social process that might take place in communities of practice (CoP). A CoP is a group (e.g. a crew) wherein members share an activity and learn from each other. It is argued that CRM training programmes will benefit from including a social learning perspective. Factors that enable the assessment of teams are discussed, and it is argued that the training should be tailored to existing crews, emphasising a learning environment as close to reality as possible.     

Recursive least squares algorithm for a nonlinear additive system with time delay

This paper proposes a recursive least squares algorithm for a nonlinear additive system with time delay. By the Weierstrass approximation theorem and the key term separation principle, the model can be simplified as an identification model. Based on the identification model, a recursive least squares identification algorithm is used to estimate all the unknown parameters of the time-delayed additive system. An example is provided to show the effectiveness of the proposed algorithm.