Propeller torque load and propeller shaft torque response correlation during ice-propeller interaction

Ships use propulsion machinery systems to create directional thrust. Sailing in ice-covered waters involves the breaking of ice pieces and their submergence as the ship hull advances. Sometimes, submerged ice pieces interact with the propeller and cause irregular fluctuations of the torque load. As a result, the propeller and engine dynamics become imbalanced, and energy propagates through the propulsion machinery system until equilibrium is reached. In such imbalanced situations, the measured propeller shaft torque response is not equal to the propeller torque. Therefore, in this work, the overall system response is simulated under the ice-related torque load using the Bond graph model. The energy difference between the propeller and propeller shaft is estimated and related to their corresponding mechanical energy. Additionally, the mechanical energy is distributed among modes. Based on the distribution, kinetic and potential energy are important for the correlation between propeller torque and propeller shaft response.     

Interference resistance of pentamaran ship model with asymmetric outrigger configurations

An experimental investigation is performed to assess the relation of interference performance on the total resistance of a pentamaran model advancing in calm water. For this motivation, the total drag of the ship is performed for several values of asymmetric outrigger configuration and hull separation, altering the Froude number in the range 0.3–0.9. Our results indicate that remarkable changes in resistance require notable changes in transverse distance values (hull separation) when wave interference may occur. In addition, there is no single configuration that consistently outperforms the other configurations across the entire speed range and the optimum interference factor ?0.2 appears at a Froude number of 0.45 in S/L=0.33 with the outrigger outer position: asymmetric outboard for A3 configuration.     

6L16/24型柴油机振动噪声预测研究

柴油机声振特性的研究已经成为现代柴油机技术的一个重要研究方向,在设计阶段了解和掌握柴油机振动噪声性能,基于仿真模型进行整机振动响应分析和噪声预测,对确保柴油机产品满足日益严格的振动噪声要求,提高其产品竞争力,具有十分重要的意义。以6L16/24型柴油机为研究对象,利用有限元/边界元方法对其声振特性进行了数值仿真.     

Verification and validation study of URANS simulations for an axial waterjet propelled large high-speed ship

The accurate prediction of waterjet propulsion using computational fluid dynamics (CFD) is of interest for performance analyses of existing waterjet designs as well as for improvement and design optimization of new waterjet propulsion systems for high-speed marine vehicles. The present work is performed for three main purposes: (1) to investigate the capability of a URANS flow solver, CFDSHIP-IOWA, for the accurate simulation of waterjet propelled ships, including waterjet–hull interactions; (2) to carry out detailed verification and validation (V&V) analysis; and (3) to identify optimization opportunities for intake duct shape design. A concentrated effort is applied to V&V work and performance analysis of waterjet propelled simulations which form the focus of this paper. The joint high speed sealift design (JHSS), which is a design concept for very large high-speed ships operating at transit speeds of at least 36 knots using four axial flow waterjets, is selected as the initial geometry for the current work and subsequent optimization study. For self-propelled simulations, the ship accelerates until the resistance equals the prescribed thrust and added tow force, and converges to the self propulsion point (SPP). Quantitative V&V studies are performed on both barehull and waterjet appended designs, with corresponding experimental fluid dynamics (EFD) data from 1/34 scale model testing. Uncertainty assessments are performed on iterative convergence and grid size. As a result, the total resistance coefficient for the barehull case and SPP for the waterjet propelled case are validated at the average uncertainty intervals of 7.0 and 1.1%D, respectively. Predictions of CFD computations capture the general trend of resistance over the speed range of 18–42 knots, and show reasonable agreement with EFD with average errors of 1.8 and 8.0%D for the barehull and waterjet cases, respectively. Furthermore, results show that URANS is able to accurately predict the major propulsion related features such as volume flow rate, inlet wake fraction, and net jet thrust with an accuracy of ~9%D. The flow feature details inside the duct and interference of the exit jets are qualitatively well-predicted as well. It is found that there are significant losses in inlet efficiency over the speed range; hence, one objective for subsequent optimization studies could be maximizing the inlet efficiency. Overall, the V&V work indicates that the present approach is an efficient tool for predicting the performance of waterjet propelled JHSS ships and paves the way for future optimization work. The main objective of the optimization will be reduction of powering requirements by increasing the inlet efficiency through modification of intake duct shape.     

海上溢油应急能力评估研究

针对目前我国海上溢油应急能力评估现状,借鉴国内外其他领域应急能力评估模式的先进经验,建立了包含5个一级指标,20个二级指标的海上溢油应急能力评估指标体系.运用改进的层次分析法得出不同层次指标的权重,并结合某海区溢油应急能力现状评分,得到该海区海上溢油应急能力等级.研究表明,该评价指标体系合理、实用,可为海上溢油应急能力...     

复杂电磁环境下一种新的航迹起始方法

针对复杂电磁环境下有源雷达所获得的量测数据不全,组网雷达中的有源雷达不能有效的进行航迹起始,提出一种有源与无源雷达协同的航迹起始方法。仿真结果表明该方法在干扰条件下的有效性。     

水火弯板残余变形预报的数值和量纲分析

Line heating process is a very complex phenomenon as a variety of factors affects the amount of residual deformations. Numerical thermal and mechanical analysis of line heating for prediction of residual deformation is time consuming. In the present work dimensional analysis has been presented to obtain a new relationship between input parameters and resulting residual deformations during line heating process. The temperature distribution and residual deformations for 6 mm, 8 mm, 10 mm and 12 mm thick steel plates were numerically estimated and compared with experimental and published results. Extensive data generated through a validated FE model were used to find co-relationship between the input parameters and the resulting residual deformation by multiple regression analysis. The results obtained from the deformation equations developed in this work compared well with those of the FE analysis with a drop in the computation time in the order of 100 (computational time required for FE analysis is around 7 200 second to 9 000 seconds and where the time required for getting the residual deformation by developed equations is only 60 to 90 seconds).     

集装箱货运仿真模型在珠三角港港口投资方案评估

In the Pearl River Delta (PRD), there is severe competition between container ports, particularly those in Hong Kong, Shenzhen, and Guangzhou, for collecting international maritime container cargo. In addition, the second phase of the Nansha terminal in Guangzhou’s port and the first phase of the Da Chang Bay container terminal in Shenzhen opened last year. Under these circumstances, there is an increasing need to quantitatively measure the impact these infrastructure investments have on regional cargo flows. The analysis should include the effects of container terminal construction, berth deepening, and access road construction. The authors have been developing a model for international cargo simulation (MICS) which can simulate the movement of cargo. The volume of origin-destination (OD) container cargo in the East Asian region was used as an input, in order to evaluate the effects of international freight transportation policies. This paper focuses on the PRD area and, by incorporating a more detailed network, evaluates the impact of several infrastructure investment projects on freight movement.     

一种基于CFD的水动力系数计算新方法

Applications of computational fluid dynamic (CFD) to the maritime industry continue to grow with the increasing development of computers. Numerical approaches have evolved to a level of accuracy which allows them to be applied for hydrodynamic computations in industry areas. Hydrodynamic tests, especially planar-motion-mechanism (PMM) tests are simulated by CFD software -FLUENT, and all of the corresponding hydrodynamic coefficients are obtained, which satisfy the need of establishing the simulation system to evaluate maneuverability of vehicles during the autonomous underwater vehicle scheme design stage. The established simulation system performed well in tests.     

船舶在规则纵浪中的混沌运动

Parametric resonance can lead to dangerously large rolling motions, endangering the ship, cargo and crew. The QR-factorization method for calculating (LCEs) Lyapunov Characteristic Exponents was introduced; parametric resonance stability of ships in longitudinal waves was then analyzed using LCEs. Then the safe and unsafe regions of target ships were then identified. The results showed that this method can be used to analyze ship stability and to accurately identify safe and unsafe operating conditions for a ship in longitudinal waves.