Schlieren,Shadowgraph, Mie-scattering visualization of diesel and gasoline sprays in high pressure/high temperature chamber under GDCI engine low load condition

Three visualization methods, Schlieren, Shadowgraph, and Mie-scattering, were applied to compare diesel and gasoline spray structures in a constant volume chamber. Fuels were injected into a high pressure/high temperature chamber under the same in-cylinder pressure and temperature conditions of low load in a GDCI (gasoline direct injection compression ignition) engine. Two injection pressures (40 MPa and 80 MPa), two ambient pressures (4.2 MPa and 1.7 MPa), and two ambient temperatures (908 K and 677 K) were use. The images from the different methods were overlapped to show liquid and vapor phases more clearly. Vapor developments of the two fuels were similar; however, different liquid developments were seen. At the same injection pressure and ambient temperature, gasoline liquid propagated more quickly and disappeared more rapidly than diesel liquid phase. At the low ambient temperature and pressure condition, gasoline and diesel sprays with higher injection pressures showed longer liquid lengths due to higher spray momentum. At the higher ambient temperature condition, the gasoline liquid length was shorter for the higher injection pressure. Higher volatility of gasoline is the main reason for this shorter liquid length under higher injection pressure and higher ambient temperature conditions. For a design of GDCI engine, it is necessary to understand the higher volatility of gasoline.     

Dynamic analysis of a pantograph-catenary system using absolute nodal coordinates

The dynamic interaction between the catenary and the pantographs of high-speed trains is a very important factor that affects the stable electric power supply. In order to design a reliable current collection system, a multibody simulation model can provide an efficient and economical method to analyze the dynamic behavior of the catenary and pantograph. In this article, a dynamic analysis method for a pantograph-catenary system for a high-speed train is presented, employing absolute nodal coordinates and rigid body reference coordinates. The highly flexible catenary is modeled using a nonlinear continuous beam element, which is based on an absolute nodal coordinate formulation. The pantograph is modeled as a rigid multibody system. The analysis results are compared with experimental data obtained from a running high-speed train. In addition, using a derived system equation of motion, the calculation method for the dynamic stress in the catenary conductor is presented. This study may have significance in providing an example that a structural and multibody dynamics model can be unified into one numerical system.     

基于Internet地籍信息系统的建立方法

探讨了在AutoCADMap2 0 0 0平台下 ,建立网络地籍信息系统的关键技术和整体开发方案 ,以及系统中各种图形数据与属性数据处理的问题     

Studies on the optimization of stern hull form based on a potential flow solver

A hypothesis of the minimum energy of secondary flow, suggested by Bessho, is introduced here. According to this hypothesis, it can be expected that hull forms having frame lines with a minimum energy of secondary flow show less form drag. In the first part of this article, secondary flow energy is evaluated for the cases with and without a free-surface effect, and Bessho’s hypothesis is confirmed for practical hull forms. Then optimization methods for the stern hull form are suggested, in which a nonlinear optimization technique is introduced. Numerical examples are given for a practical tanker hull form and a practical container hull form. From these studies, the suggested optimization method can be confirmed as a simplified and practical design method to the select frame lines of stern hull forms.     

Modeling household interactions in daily in-home and out-of-home maintenance activity participation

The activity travel patterns of individuals in a household are inter-related, and the realistic modeling of activity-travel behavior requires that these interdependencies be explicitly accommodated. This paper examines household interactions impacting weekday in-home and out-of-home maintenance activity generation in active, nuclear family, households. The in-home maintenance activity generation is modeled by examining the duration invested by the male and female household heads in household chores using a seemingly unrelated regression modeling system. The out-of-home maintenance activity generation is modeled in terms of the decision of the household to undertake shopping, allocation of the task to one or both household heads, and the duration of shopping for the person(s) allocated the responsibility. A joint mixed-logit hazard-duration model structure is developed and applied to the modeling of out-of-home maintenance activity generation. The results indicate that traditional gender roles continue to exist and, in particular, non-working women are more likely to share a large burden of the household maintenance tasks. The model for out-of-home maintenance activity generation indicates that joint activity participation in the case of shopping is motivated by resource (automobiles) constraints. Finally, women who have a higher propensity to shop are also found to be inherently more efficient shoppers.     

Trucking industry demand for urban shared use freight terminals

The issue of shared use urban freight facilities first received attention during the 1970s when it was observed that, while inter-urban freight movements were becoming increasingly efficient, there were significant diseconomies in the movement of freight via truck within urban areas. Early research suggested that shared urban freight facilities should be constructed so that trucking companies could consolidate smaller shipments into larger ones. In the past few years, the concept of Urban Ports has gained increasing attention, not just for carriers who need to load and unload freight, but to provide a place near the urban center for truckers to wait out peak traffic periods. In this paper, using recently developed survey data, we examine trucking company interest in such facilities by examining the results of an ordered probit demand model.     

Linking land use and transportation in a rapidly urbanizing context: A study in Delhi,India

Cities in developing countries like India are facing some of the same concerns that North American cities are: congestion and urban growth. However, there is a sense of urgency in cities like Delhi, India in that this growth is far more rapid as both urbanization and motorization are ongoing processes that have not yet peaked. In this paper, we examine land use change and its relationship with transportation infrastructure and other planning related variables in a spatial context. We estimate land use change models at two different scales from separate data. Cellular automation and Markov models were used to understand change at the regional scale and discrete choice models to predict change at the local level. The results suggest that land use in the Delhi metropolitan area is rapidly intensifying while losing variety. These changes are affected by industrial, commercial and infrastructure location and planners and policy-makers need to better understand the implications of location decisions. We also examine these results in the context of a policy framework for data-based planning that links land use and transportation models for Delhi.     

Aerodynamic design optimization of rear body shapes of a sedan for drag reduction

This study proposes an aerodynamically optimized outer shape of a sedan by using an Artificial Neural Network (ANN), which focused on modifying the rear body shapes of the sedan. To determine the optimization variables, the unsteady flow field around the sedan driving at very fast speeds was analyzed by CFD simulation, and fluctuations of the drag coefficient (C _D ) and pressure around the car were calculated. After consideration of the baseline result of CFD, 6 local parts from the end of the sedan were chosen as the design variables for optimization. Moreover, an ANN approximation model was established with 64 experimental points generated by the D-optimal methodology. As a result, an aerodynamically optimized shape for the rear end of the sedan in which the aerodynamic performance is improved by about 5.64% when compared to the baseline vehicle is proposed. Finally, it is expected that within the accepted range of shape modifications for a rear body, the aerodynamic performance of a sedan can be enhanced so that the fuel efficiency of the sedan can be improved. The YF SONATA, a sedan manufactured by Hyundai Motors Corporate, played a major role in this research as the baseline vehicle.     

A self-powering system based on tire deformation during driving

Tire intelligence is vital in the improvement of the safety of vehicles because the tire supports the car body and is the contact point between the vehicle and the road. To create an intelligent tire, sensors must be installed to measure the behavior of the tire. However, it is difficult to apply a wired sensor system on the wheel of the tire. Hence, it is necessary to implement a self-powering, wireless system (a type of energy harvesting system) that can be mounted inside the tire. The purpose of this study is to convert the strain energy caused by deformation of the tire while driving into useful electrical energy to supply the sensor system. A flexible piezofiber is utilized for the energy conversion. The variation in strain, due to changes in speed, load, and the internal pressure of the tire, was measured along two axial directions to evaluate the amount of available strain energy. The amount of strain changed from 0.15% to 0.8%. To predict the amount of available energy from a tire, we perform an analysis of the relationship between the strain and the voltage. In addition, experiments for impedance matching between piezofiber and related circuits were conducted to optimize the external loads for transferring energy efficiently. Based on the procedure mentioned above, at least 0.58 mJ of electrical energy can be generated by using the laterally oriented strain (1500 to 2500 micro strain). The result of this study is expected to enhance the potential realization of self-generating wireless sensor systems for so-called ??intelligent?? tires.     

Topology optimization of gas flow channel routes in an automotive fuel cell

An efficient topology optimization method for fluid-structure problems was developed in an effort to determine the optimum flow channel route in a fuel cell bipolar plate from first principles. This study describes the derivation and solution of new mathematical equations for topology optimization combining a density-based algorithm, the interpolation method of moving asymptotes (MMA), and the incompressible Navier-Stokes equation with a term representing the chemical reaction between hydrogen and the catalyst. The present method is based on the finite element method with a newly developed reaction rate equation. In this model, a topology variable of 0 represents viscous flow, whereas a value of 1 indicates porous flow. The flow velocity and pressure were obtained from the Navier-Stokes equation and constraints and element matrices for sensitivity analyses during the optimization. MMA was utilized to calculate the optimum flow routes in the design domain. The influence of the key design parameter q and the pressure drop on the optimum topology were also investigated. The channel topology became smoother with decreasing q, and the number of channels increased with increasing pressure drop.