Design of power split transmission: Design of dual mode power split transmission

The power split type hybrid system transmits engine power by dividing it into the electrical unit and the mechanical unit. Its power transmission efficiency is highest at the mechanical point (MP), where the full power is transmitted to the mechanical unit. In this study, the equation for the MP was derived for the gear ratios of a general 4-node lever model. The MP characteristics for the transmission ratio (TR) of the input split and compound split structures were examined using the equation derived. Using the examined input split and compound split structures, a systematic design method for the dual mode power split transmission was proposed. In the dual mode power split transmission, the MP could be positioned at the desired TR, and the input split and compound split modes could be selectively used according to the clutch combination, which leads to the operation of the vehicle within a high system efficiency range.     

Design and optimization of an LPG roller vane pump for suppressing cavitation

A roller vane type liquefied petroleum gas (LPG) pump was developed for a liquid phase LPG injection (LPLi) engine. Most of the LPG pumps used in the current LPLi engines are installed inside of the LPG tank, but this pump is intended to be installed outside of the LPG tank to overcome the difficulty of fixing an in-tank pump. Because LPG has a low boiling point and high vapor pressure, it usually causes cavitation in the pump and consequently deteriorates the flow rate of the pump. The purpose of this work is to optimize the design of the roller vane pump in order to suppress cavitation and increase the fuel flow rate by using a computational fluid dynamics (CFD) analysis. In order to achieve these goals, the intake port configuration and the rotor of the roller vane pump were redesigned and simulated using STAR-CD code. Computation was performed for six different models to obtain the optimized design of the roller vane pump at a constant speed of 2600 rpm and a constant pressure difference between the inlet and outlet of 5 bar. The computation results show that an increased intake port cross-section area can suppress cavitation, and the pump can achieve a higher flow rate when the rotor configuration is changed to increase its chamber volume. When the inlet pressure difference is 0.1 bar higher than the fluid saturation pressure, the pump reaches its maximum flow rate.     

Simple estimation of high-frequency radiation from a muffler shell

The acoustic design of exhaust mufflers has mainly focused on reducing the discharge noise from the tailpipe. However, the noise that is transmitted through the muffler jacket and the endplate becomes important since the muffler reduces the amount of discharge noise when it has an optimized design. It is known that the contribution to the overall exhaust noise of the muffler shell is significant in the mid- and high-frequency ranges. The current problem is that there are no appropriate computational tools at high frequencies. A simple method to analyze the 1/3-octave band of sound radiating from an arbitrary shape (like a muffler) was employed to predict the band spectrum of the radiated noise. The calculation method included formulating the boundary integral, which was modified into a quadratic form in order to enable the prediction of the intensity levels in a band analysis. Monopole and dipole source terms in the conventional BEM were transformed into the auto- and cross-spectra of the two vibrating sources, in which the cross-spectra could be eventually omitted by assuming that the correlation coefficients were negligible. The method was adopted in an abrupt calculation of the shell noise in 1/3-octave band levels without nonuniqueness problem. In comparison with the measured data, the simulation result showed roughly 3-dB errors at most of the field points, excluding several special points that were normal to the shell and exhibited a maximum 5-dB error.     

基于AFC系统的苏州市轨道交通网络化客流特征分析及启示

从运营轨道线网客流中找寻规律,可以有效指导城市科学合理地预测轨道交通客流。本文根据目前苏州市AFC系统运营数据积累,从网络、线路、车站三个层面探讨苏州市轨道交通客流特征,分析目前线网客流特征,为后续预测模型的参数选择提供参考和依据,并且针对轨道交通规划设计及运营提出相关工作建议。     

Design and implementation of a UPnP-can gateway for automotive environments

In this paper, we propose a universal plug and play (UPnP) — controller area network (CAN) gateway system using UPnP middleware for interoperability between external smart devices and an in-vehicle network. The proposed gateway consists of a UPnP communication device, a CAN communication device, and a device translator layer. In-vehicle devices are not usually IP-based, so we implemented an in-vehicle device manager in the UPnP communication device which is in the gateway. We developed a vehicle simulator to produce real vehicular data for performance analysis. The CAN communication device transmits and receives real-time vehicle data between the real vehicular simulator and external devices through the UPnP. The device translator layer configures a message frame for enabling seamless data input and output between the CAN and UPnP protocols. After implementation, we generated an internal-external service request and tested the result. Finally, we confirmed the service request and operation between external devices and the internal vehicular device. Additionally, for a variety of external device numbers and communication environments, we demonstrated the gateway performance by measuring the round trip time (RTT) for overall service implementation.     

Conceptual design of economic hybrid vehicle system using clutchless geared smart transmission

Most hybrid vehicles employ the continuously variable transmission (CVT or eCVT) currently as their choice of the transmissions. Recently, an automated geared transmission (AGT) or dual clutch transmission (DCT) is being tried for some hybrid vehicles for the better fuel economy than the CVT hybrid. However, this AGT or DCT is using automated clutches which require the hydraulic power in addition to the slippage in the clutch plate invoking some energy loss as well as wear. Also, they require a motor with significant power to match to the engine power. The clutchless geared smart transmission (CGST) has no clutch and the clutch function is performed by a planetary gear system controlled by a motor-generator. The hybrid vehicles proposed here using CGST may have some merits in durability, fuel efficiency, and cost since they do not have clutches. The motor used for the clutch function can be also working for power merge with the engine in propelling the vehicle. The proposed hybrid system can be either mild hybrid or full hybrid by adopting a different capacity of battery with much smaller motor-generator due to the planetary gear system compared to the other type hybrid vehicles. In this study, the prospects of newly proposed CGST hybrid system are examined in practical aspects compared with AGT hybrid or DCT hybrid systems.     

Operating speed pattern optimization of railway vehicles with differential evolution algorithm

The railway transportation system has much advantage in eco-friendliness, punctuality and safety compared to any other transportation system. Most of the railway system administrators have to control and operate under limited resources such as trains and facilities. It is necessary to control traveling time and energy consumption for efficient operation in the railway systems, because the board rate of passenger is inconstant with time variance. It is common that the shorter traveling time causes the greater energy consumption. In this study, a new optimization method considering operation time or energy consumption is proposed by using differential evolution algorithm and some cases are reviewed. The total energy change due to operation time variation are investigated by using the proposed optimization method for tangent and gradient track conditions. Both cases, the total energy decreases exponentially. However, because of gradient the total energy are saturated after a certain time for gradient track.     

重庆市轨道交通网络化新形势下的地面常规公交转型发展对策研究

近年来,随着轨道交通的大规模建设和交通出行方式的多样化,给地面常规公交带来了前所未有的挑战和压力,常规公交客流呈现下降趋势已经成为普遍现象.本文主要以重庆为例,基于轨道交通网络化发展,探究在轨道网发展过程中常规公交面临的困境,提出在新常态下常规公交的发展定位和发展策略,构建"以轨道为骨干,常规公交为基础"的公共交通一体化网络,从而实现地面公交服务效率和品质的全面提升,使其最终实现成功转型发展.