500 t半圆体预制出运工艺与观感质量控制

依据长江口深水航道治理二期工程NⅡA标整治建筑物中半圆体混合堤结构形式,对这种半圆体大型构件出运工艺与预制质量控制的技术关键进行分析总结,供同行参考.     

Biologically induced modification of seawater viscosity in the Eastern English Channel during a Phaeocystis globosa spring bloom

To identify the potential relationship between Pheaocystis globosa bloom conditions and seawater properties, a hydrobiological survey was performed in the inshore waters of the Eastern English Channel over the course of the phytoplankton spring bloom. Chlorophyll concentration, auto- and hetero/mixotrophic composition of protists and standing stock, and seawater viscosity were measured weekly from March to June 2004. The decline of the bloom is characterized by a massive foam formation in the turbulent surf zone. Before foam formation, seawater viscosity significantly increased, showing a significant positive correlation with chlorophyll concentration. In contrast, after foam formation this correlation was negative, seawater viscosity kept increasing despite a sharp decrease in chlorophyll concentrations. No significant correlation has been found between seawater viscosity and the composition of the phytoplankton assemblages observed during the survey. However, significant positive correlations have been found between seawater viscosity and both the size and the abundance of P. globosa colonies. From the correlation patterns observed between chlorophyll concentration and seawater viscosity, we suggest that the rheological properties of seawater are mainly driven by extracellular materials associated with colony formation and maintenance rather than by cell composition and standing stock.     

Driver steering and muscle activity during a lane-change manoeuvre

The article reports an experimental study of driver steering control behaviour in a lane-change manoeuvre. Eight test subjects were instrumented with electromyography to measure muscle activation and co-contraction. Each subject completed 30 lane-change manoeuvres with one vehicle on a fixed-base driving simulator. For each driver, the steering torque feedback characteristic was changed after every ten manoeuvres; the response of the vehicle to steering angle inputs was not changed. Drivers' control strategies were found to be robust to changes in steering torque feedback. Path-following errors, muscle activity and muscle co-contraction all reduce with the number of lane-changes performed by the driver, suggesting the existence of a learning process. Comparing the test subjects, there was some evidence that high levels of co-contraction were used to allow high-frequency steering inputs to be generated. The results contribute to the understanding of vehicle-driver (and more generally, human-machine) dynamic interaction.     

赛艇用预浸料的研制

以先进的碳纤维、芳纶纤维和高性能的环氧树脂为原料,研制适于制造赛艇的预浸料,介绍制备设备和技术,分析表明树脂溶液浓度和预浸料的线速度是影响预浸料树脂含量的因素,改进浸渍工艺后赛艇质量和性能有明显改善。     

IGCT及其门极驱动电路研究

IGCT作为一种新型大功率半导体开关器件,吸取了GTO和IGBT的优点,但其驱动则需要借助配套的门极驱动电路板才能实现.介绍了IGCT的基本工作原理,并根据驱动电路的要求分析设计原理,对1 100 A/4 500V逆导IGCT集成门极驱动电路的设计方法进行了具体分析和研究,实验结果验证了设计方法的可行性和正确性.     

TYJL_ECC容错计算机联锁系统的可靠性评估

TYJL—ECC计算机联锁控制系统主要包括非故障-安全要求的操作表示、维修接口层以及有严格故障-安全要求的逻辑运算层、采集驱动层。其中逻辑运算层和采集驱动层的可靠性决定了整个系统的可靠性,对其进行系统的故障树分析。基于故障树对系统可靠性评估的一般步骤,依照本系统的典型配置和实际工作过程,定义系统的故障模式。依据相关标准对构成本系统的最基本的功能模块进行可靠性预测。根据故障模式和可靠性预测建立系统的故障树。根据马尔可夫过程的特性,对与门、或门及三取二逻辑进行定量计算。从而可计算出整个系统的失效率和平均修复时间。经计算所得系统的平均故障间隔时间符合铁道部规定。研究表明,TYJL—ECC容错计算机联锁系统具有很高的可靠性和安全性。     

基于对流效应的寒区路堤块石层临界高度研究

为了研究块石路堤降温效应与块石层高度之间的关系,基于多孔介质自然对流理论和热传导理论引入了表征寒区块石路堤自然对流降温效应的自然对流指数,利用热传导温度分布函数获得了路堤自然对流指数随块石层高度变化的近似公式。分析表明:自然对流指数最小值对应于路堤块石层的最小高度,而其最大值对应于路堤块石层的最大高度。另外介绍了一种利用自然对流指数近似公式估算路堤块石层临界高度的方法,并具体给出了算例,最后进行了数值验算。结果表明:通过自然对流指数确定的临界高度可为寒区工程的路堤设计提供参考。     

武汉至广州客运专线项目

1项目概况 1.1项目建设必要性 武广铁路客运专线位于湖北、湖南、广东三省境内,是规划中的京广客运专线的重要组成部分.目前,京广铁路是我国铁路网中最繁忙的铁路干线之一,2002年以占全路约3.3%的营业公里完成了全路客、货运输周转量的16.8%和9%.其中,武汉-广州段尤为紧张,运输能力处于超饱和状态,严重制约了区域经济的发展.与此同时,国民经济和社会发展还将对京广通道客货运输能力和质量提出更高要求.利用既有线扩能,新建货运双线或其他线路改建分流等方式,均不能彻底解决运输能力和运输质量的问题.因此,迫切需要修建客运专线.     

Evasive manoeuvres with a steering robot

In the pursuit of an objective rating on vehicle stability performance, it is always desirable to reduce disturbances and inconsistencies during experimental evaluations, especially the ones introduced by human drivers. This paper presents the development of a steering robot designed for closed-loop steering tasks during evasive manoeuvres. It describes the controller structure and discusses experimental results, in addition to simulation/vehicle model verifications and theoretical control analysis.     

数控铣削三轴联动刀轨路径仿真

基于OpenGL实现数控铣削三轴联动刀具轨迹包络面仿真．可实时观察刀具轨迹运动过程，并对仿真结果进行平移、缩放、旋转等操作，以便全方位、多角度观察。