绕线型异步电动机转子绕组事故分析和预防

对绕线型异步电动机转子绕组常见事故的分析,提出了具体的防治措施。     

浅谈沥青玛蹄脂碎石混合料(SMA)技术

在充分参考、吸收国外先进SMA技术的基础上,结合我国的气候特点和交通状况,详细阐述了符合我国实际的SMA技术。     

已有公路自然区划的框架体系、特点与适应性的研究

公路自然区划是研究自然环境对公路建设影响的产物，同时也是公路建设适应自然环境研究的结果．它可以为公路建设和环境生态保护提供科学的依据。在综合分析我国已有的公路自然区划的基础之上，探讨已有公路自然区划的框架体系、特点及适应性，可为新公路自然区划的制定提供必要的依据。     

INTELLIGENT TOOLS FOR PREDICTING ANXIETY OF ALZHEIMER'S PATIENTS

Objective To predict the incidence of anxiety in Alzheimer's disease (AD) patients by using machine-learning models. Methods A large randomized controlled clinical trial was analyzed in this study, which involved AD patients and caregivers from 6 different sites in the United States. The incidence of anxiety in AD patients was predicted by backpropagation artificial neural networks and several machine learning models, including Bayesian Networks, logistic regression, ADTree, J48, and Decision table. Results Among all models for predicting the incidence of anxiety in AD patients, the artificial neural network with respectively 6 and 3 neurons in the first and second hidden layers achieved the highest predictive accuracy of 85.56 %. The decision tree revealed three main risk factors: "caregiver experiencing psychological distress", "caregiver suffering from chronic disease or cancer", and "lack of professional care service". Conclusion The unique ability of artificial neural networks on classifying nonlinearly separable problems may substantially benefit the prediction, prevention and early intervention of anxiety in Alzheimer's patients. Decision tree has the double efficacy of predicting the incidence and discovering the risk factors of anxiety in Alzheimer's patients. More resources should be provided to caregivers to improve their mental and physical health, and more professional care services should be adopted by Alzheimer's families.     

复合混凝剂处理印染废水

聚合硫酸铝，聚合硫酸铁，以及更为复杂的聚合硫酸铝铁作混凝剂处理COD为3000mg/L,SS为300mg/L左右的印染废水的最佳工艺条件是:pH范围为7．0－9．5，搅拌速度为180r/min，一次处理混凝剂投加量为300mg/L，沉降时间为15min。COD去除率在80％左右，若再经双层滤料柱进行过滤处理，效果更好，能达到排效标准。     

Tool Wear Prediction in Micro-end-milling with Hard Material

The applications of micro-machining have increased drastically in the last ten years. However, tools with less than 1mm diameter using for micro-mills have very short and unpredictable life when they are used to cut hard metals. In this study, preliminary design of experiment (DOE) test program was conducted to investigate and identify the factors affecting tool wear at the micro-scale with hard material. Analysis of variance (ANOVA) and Taguchi method were efficient to determine appropriate cutting condition and the effect of parameters. A simple model was also developed to predict the width of slots on the workpiece along the cutting length. The obtained results can provide the basic guidelines for parameter setting of micro-end-milling with hard material.     

岩石压剪裂纹水力劈裂分析及裂纹面方向计算

水力劈裂技术在岩土工程中应用越来越广泛,但自然界中的水力劈裂可能会引发地质灾害,因此,水力劈裂机理研究已成为岩土工程中的热点问题。通过利用断裂力学理论对水力劈裂时裂纹的扩展问题进行研究,推导了基于最大周向应力理论的裂纹起裂角及临界水压的计算公式,分析了压剪复合断裂时临界水压力与裂纹面方向之间的关系,在此基础上得出了压剪断裂时最易于发生水力劈裂的裂纹面位置。     

沥青路面裂缝扩缝机的研制

较窄的沥青路面裂缝修补前应先行扩缝,这是保证其修补质量的必要条件。而扩缝设备有关整机驱动及切缝、刀具和行走装置的结构及参数选择是其研制成功作业的关键。LK10在这些方面做了有益的探讨。     

水泥混凝土路面裂缝成因分析及预防措施

系统分析水泥混凝土路面裂缝产生的原因,并提出相应的预防及控制措施.     

���������·������Ԥ�ⷽ���о�

针对传统四阶段法不太适合长大铁路干线需求预测的实际，通过时四阶段需求预测方法及各种模型的改造，建立了一套适合我国铁路项目客运量预测的预测方法和程序.通过对京沪高速铁路的具体应用，论文就参数标定方法和应注意的问题提出了一些研究结论。