A new channel allocation scheme for hierarchical wireless networks

A channel allocation scheme for hierarchical wireless networks was proposed in terms of the connection-level quality of service. The channel allocation scheme was analyzed using both horizontal channel borrowing and vertical traffic overflowing. Pre-emptive priority strategies are used to classify real-time services and non-real-time services, real-time service is given higher priority for it is allowed to pre-empt channels used by non-real-time service. Some channel borrowing thresholds and acceptance ratios are used to avoid channel locking or dynamic power control, which can also be dynamically adjusted according to network load. Simula-tion results show that the proposed schemes can improve the system performance.     

Reliability analysis of repairable systems using stochastic point processes

In order to analyze the failure data from repairable systems, the homogeneous Poisson process(HPP) is usually used. In general, HPP cannot be applied to analyze the entire life cycle of a complex, re-pairable system because the rate of occurrence of failures (ROCOF) of the system changes over time rather thanremains stable. However, from a practical point of view, it is always preferred to apply the simplest methodto address problems and to obtain useful practical results. Therefore, we attempted to use the HPP model toanalyze the failure data from real repairable systems. A graphic method and the Laplace test were also usedin the analysis. Results of numerical applications show that the HPP model may be a useful tool for the entirelife cycle of repairable systems.     

钢桥面铺装混合料三轴重复加载试验变形特性

为了研究钢桥面铺装材料的高温变形特性及其车辙预估方法,针对MA及SMA两种钢桥面铺装混合料,采用三轴重复加载试验评价其高温性能,并根据试验结果,通过多元线性回归得到材料的非线性计算模型参数,使用ABAQUS有限元软件,模拟三轴试验过程,将计算变形与实测变形相比较。发现两种混合料高温变形发展规律以及对不同荷载条件的响应方式不同,SMA具有优异的高温抗变形能力;有限元模拟的误差约为10%。分析结果表明:采用三轴重复加载试验和多元线性回归确定材料的非线性计算模型参数的方法可靠,模型参数可用于沥青桥面铺装的车辙变形预估。     

物流企业联盟利益分配方法研究

分析了物流企业联盟利益分配的原则,提出了几种常用的利益分配方法,并在此基础上进行改进,提出了基于加权群体重心模型的利益分配方法,实例证明该方法更加具有公平合理性,在物流企业联盟的利益分配中有应用推广价值。     

边坡防护室内水力冲刷模拟试验及降雨入渗分析

阐述了边坡防护室内水力冲刷模拟试验的目的、方法和步骤.针对不同边坡防护型式、不同坡率、不同土质状况的五种试件进行了降雨入渗试验,对结果进行了分析,并总结出不同工况下的降雨入渗规律.     

新疆公路运输量发展预测

在分析新疆经济、交通运输发展的基础上,采用回归分析法、三次指数平滑法、灰色预测方法和弹性系数法等多种方法预测新疆2010年、2015年、2020年的公路运输需求,并结合这些方法,采用了基于误差权重因子的多种方法组合预测的新方法,对新疆公路运输需求量进行了优化组合预测。对新疆未来3个特征年预测结果的分析表明,该预测方法是合理而有效的。     

����·��ͨ���������ƵĻ�������Ⱦ�����ŷ������Ż��о�

随着城市机动车保有量的逐年增加,汽车尾气排放已成为许多大城市空气的主要污染源。以一氧化碳（CO）、氮氧化物（NOx）和碳氢化合物（HC）为评价因子,基于单车排放因子与车速之间的关系、交通流三参数的关系,建立了路段总排放量与车速、车型比例、交通量三个因素之间的数学模型。运用非线性规划理论,建立了以路段通行能力为主要约束条件,以污染物排放量最小为目标的最优化模型,以及求解算法。通过实例证明,通过调控路段上车型构成来调控实际交通量的大小,间接地调控行驶车速,进行排放量控制的方法是可行的。     

Numerical Analysis of the Mixture Formation in a Two-Stroke Wall-Guided LPG DI Engine for Extended-Range Electric Vehicle

The use of automotive LPG characteristics which are easy to evaporate vaporization and carry. The paper presents a design of extended-range electric vehicle for wall-guided two stroke LPG engine with direct injection combustion system. Based on the modified vehicle LPG spray model, a database describing the characteristics of vehicle LPG fuel was built and imported into the CFD software. And the accuracy of the model is verified by the Schlieren experimental results. The concentration and velocity field of the mixture in the cylinder under different load conditions are numerically analyzed. The analyzed result indicated that the start injection time θ = 60°–70°CA BTDC under part load condition, the plug electrode near the gathering of a richer mixture is easy to be fired at spark ignition time, the obvious formation of mixture in cylinder is formed and the overall air-fuel ratio is above 40: 1. The start-transition working condition and large load conditions in the piston moves upward before closing the exhaust port to start injection LPG. The optimized LPG injection start time θ ensures that the fresh gas is locked in the cylinder when the exhaust port is closed (63°CA ABDC). In the ignition time of the spark plug, an ideal homogeneous mixture in the cylinder is realized.     

某轿车副车架模态分析

本文通过用Hypemesh11.0进行网格划分,然后用MSC.NASTRAN进对某轿车副车架进行模态分析,以确定冲压横梁结构是否能够达到原液压横梁结构的模态固有频率,为制定工艺方案提供支持,也为以后同类产品的研发提供设计参考。     

基于GT-Suite的重型载货车冷却系统仿真及匹配设计

基于GT-Suite软件建立了某重型载货车发动机冷却系统的一维-准三维混合仿真模型,通过对发动机极限工况下出水温度、出水流量等计算结果与试验值对比分析,验证了仿真模型的准确性。最后在此模型基础上对发动机冷却系统进行风扇选型匹配,实现了满足整车冷却性能要求的前提下,减小了其消耗功率,从而提高了整车经济性。