柴油超临界喷雾大涡数值模拟研究

随着现代内燃机燃烧室内温度和压力的不断提升,液体燃料往往处于超临界状态,与亚临界状态相比,其喷雾射流行为特征发生了很大的变化.本研究采用大涡数值模拟方法对超临界环境下的单组分和多组分柴油表征燃料喷雾射流进行数值计算,对比了不同气体状态方程预测柴油表征燃料超临界射流行为的差异性,发现PR气体状态方程对正庚烷质量分数分布的...     

大客车车身骨架结构强度分析及其改进设计

在Un igraph ics软件中建立车身骨架的线框模型后,用自行编制的接口程序生成命令流文件将模型导入到ANSYS环境中,建立了车身骨架有限元模型。用有限元理论分析了静态工况下客车车身骨架的强度特性,探讨了承载式车身骨架不同部位的受力特性。提出了通过对骨架结构进行局部改进来提高整体结构强度的方法,提出了对原结构进行改进设计的方案,并对改进前后的客车进行了强度试验,验证了改进后结构的合理性和可靠性。     

可视化技术及其在铁路微机联锁系统中的应用

作者结合我国铁路人员的现状,研究提出采用可视化和人工智能技术开发微机联锁系统的方法,从而可在设计、开发和使用维护微机联锁系统各个阶段提高系统的可靠性和安全性。     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

面向控制的SCR催化转化器温度模型

为了建立面向控制的SCR催化器温度模型,根据能量守恒和质量守恒方程并考虑热平衡中所涉及的换热过程不同,建立了4种SCR催化器温度的数学模型,并利用Matlab/Simulink构建图形化的计算模型。采用柴油机欧洲稳态循环(ESC)和欧洲瞬态循环(ETC)条件下的台架实测数据对模型进行检验,基于最大离散程度、拟合度和计算时间3个指标对模型进行评价和比较。结果表明,考虑催化器与废气和周围环境对流换热的温度模型具有良好的预测精度和实时性,更适合用于SCR控制策略。     

Modeling research on manufacturing execution system based on large-scale system cybernetics

A cybernetics model of manufacturing execution system(MES CM) was proposed and studied from the viewpoint of cybernetics.Combining with the features of manufacturing system, the MES CM was modeled by"generalized modeling"method that is discussed in large-scale system theory.The mathematical model of MES CM was constructed by the generalized operator model, and the main characteristics of MES CM were analyzed.