公路超高设计合理性的研究与实践

合理的超高设计是保证曲线路段行车横向稳定和舒适安全的主要措施。在正确理解和运用规范、标准的基础上,对超高设计合理性的影响因素进行了分析研究,总结了在实际设计时的一些具体经验做法。     

船用EH36高强钢无缝药芯焊丝焊接接头组织和冲击韧性研究

本文以SRSF501无缝药芯焊丝在船用EH36高强钢中的焊接应用为目的,研究了国产无缝药芯焊丝SRSF501在船用EH36高强钢焊接中的组织和冲击韧性。通过试验表明：SRSF501焊接EH36钢接头各区域的冲击性能均满足船级社要求;多层多道焊时,焊缝组织由粗大的柱状组织和细小的等轴晶组织组成,底层焊缝和末道焊缝柱状晶区域较大;盖面层两侧接头热影响区存在粗晶区,其它位置接头的热影响区不存在粗晶区;焊接接头中熔合线外2mm处,晶粒最细,冲击韧性最好。     

M型风电运维船船型设计与波浪增阻和耐波性能研究

本文基于三体风电运维船船型,结合M型船的特征要素设计改造出M型风电运维船。利用数值仿真技术模拟出M型风电运维船波浪航行时的波浪增阻与纵摇、垂荡情况,将数值仿真计算结果与原三体船的试验数据进行比较,以此探索不同M型船船型对船舶波浪航行时的波浪增阻与纵摇、垂荡情况的影响。最终确定了耐波性能较优的船型方案,从而为M型风电运维船船型设计提供了一定的参考和借鉴。     

某全驱沙漠车悬架侧倾刚度设计研究

以某4x4全驱沙漠车为研究对象,提出了一种简化的整车数学模型,建立了整车侧倾角与板簧、横向稳定杆刚度的函数关系,得到悬架侧倾角刚度对整车侧倾性能的影响。并介绍了横向稳定杆角刚度计算方法,前后悬架侧倾角刚度匹配原则。     

激光熔覆方法增强自卸车钢板耐磨性能研究

磨损是影响自卸车车厢使用寿命的主要原因之一,研究利用激光熔覆方法,制备出含有TiC、VC增强颗粒的熔覆层。利用X射线衍射仪、电子探针、透射电镜对增强颗粒进行微结构分析;利用滑动磨损试验机研究了熔覆层的耐磨损性能。结果表明,激光熔覆层的耐磨性明显好于Q235板材。     

简述环保型多功能绞吸船结合土工管袋河道清淤

采用环保型多功能绞吸船结合土工管袋施工方法,通过施工实践过程中优化设计设备指标、施工作业流程,结果表明,所引进的环保绞吸船作业效率可达40 m^3/h,充灌经排水后淤泥含水率可达80%以下。该清淤工艺的成功应用,可为类似工程标准化施工提供借鉴依据。同时建议对绞吸船的船舶时利率进行统计计算,积累实践经验,为采用该工艺时的施工计划编排、成本测算等方面提供依据。     

Assessment of factors associated with travel time reliability and prediction: an empirical analysis using probabilistic reasoning approach

Significant efforts have been made in modeling a travel time distribution and establishing measures of travel time reliability (TTR). However, the literature on evaluating the factors affecting TTR is not well established. Accordingly, this paper presents an empirical analysis to determine potential factors that are associated with TTR. This study mainly applies the Bayesian Networks model to assess the probabilistic association between road geometry, traffic data, and TTR. The results from this model reveal that land use characteristics, intersection factors, and posted speed limits are directly associated with TTR. Evaluating the strength of the association between TTR and the directly related variables, the log odds ratio analysis indicates that the land use factor has the highest impact (0.83) followed by the intersection factor (0.57). The findings from this study can provide valuable resources to planners and traffic operators in their decision-making to improve TTR with quantitative evidence.     

Subjective well-being and travel: retrospect and prospect

Although the improvement of well-being is often an implicitly-assumed goal of many, if not most, public policies, the study of subjective well-being (SWB) and travel has so far been confined to a relatively small segment of the travel behavior community. Accordingly, one main purpose of this paper is to introduce a larger share of the community to some fundamental SWB-related concepts and their application in transportation research, with the goal of attracting others to this rewarding area of study. At the same time, however, I also hope to offer some useful reflections to those already working in this field. After discussing some basic issues of terminology and measurement of SWB, I present from the literature four conceptual models relating travel and subjective well-being. Following one of those models, I review five ways in which travel can influence well-being. I conclude by examining some challenges associated with assessing the impacts of travel on well-being, as well as challenges associated with applying what we learn to policy.

     

扬州市金湾河大桥工程建设实践

金湾河大桥是扬州市金湾路新建工程中的一座跨河桥梁,也是该项目的控制性节点工程,经方案比选主桥采用预应力混凝土连续梁。介绍了金湾河大桥总体方案、桥梁结构设计、计算分析以及预应力混凝土连续梁施工中的临时固结设计、挂篮悬臂浇筑、施工监控等关键工艺和技术,可为类似桥梁建设提供参考。     

先张法折线预应力工字梁成桥动载试验研究

为了解先张法折线预应力工字梁成桥后结构的自振频率、振幅、冲击系数等动力特性实测参数,通过对其进行动载试验,将有限元计算的理论值与实测值进行了对比分析,发现自振频率、振幅、冲击系数等动力特性实测参数均小于理论值,表明桥梁整体受力性能良好,满足设计运营荷载等级的要求。