动力总成悬置元件特性对整车振动的影响

本文建立了轿车整车动力学模型，通过仿真计算和实车测试分析了怠速工况下液压悬置和橡胶悬置元件对整车振动的影响。试验测试结果与理论计算结果基本吻合，证明所建模型与分析方法是正确的，可用于分析轿车动力学问题。     

BC131变速器阻尼降噪结构设计

本文说明了对BC131汽车变速器取力孔盖板做阻尼处理后,可降低噪声声功率级3.2dB,本文分三部分:(1) 阻尼结构的减振降噪机理;(2) 实验装置;(3) 声压级及声功率级的测量和计算。     

Semi-active Damping with an Electromagnetic Force Generator

The main shortcoming of vehicle suspension systems is the amplification of input vibrations at the resonant frequency. A non-amplifying suspension system with a semi-active damping is being developed. The use of an electronically controlled rotational damper has been studied theoretically. A new sprung seat is being designed for the improvement of the working conditions for drivers of road and terrain vehicles.     

随机不平路面上的汽车强化试验研究

本文讨论了由载荷功率谱估算强化系数的方法,还研究了路面平整度、路面铺装和行驶车速等试验条件因素对汽车强化试验的影响,发现只有试验车速与实际使用常用车速接近,才能保证汽车构件上的载荷功率谱与实际使用相似。     

Vehicle Motion Analysis in Relation to Vehicle Safety

The influence of vehicle handling on the possible avoidance of accident situations is discussed. lit is shown that accident reconstruction at present does not provide the necessary information to relate the cause of accidents to the lack of road worthiness of vehicles. It follows that the vehicle behavior in proximity of its performance limit must be determined in order to infer its accident avoidance potential.

The paper presents a review of the state-of-the-art of vehicle modeling, simulation of vehicle maneuvers and full scale testing. The application of the direct method of the stability theory is suggested as a possible means of obtaining performance limit envelopes which are necessary for establishing standards of the performance of vehicles.     

Evaluation of forced flows on freeways with single‐loop detectors

This paper documents the development of a simple method for identifying and/or predicting freeway congestion using single loop detection systems. The proposed algorithm is simple and easy to incorporate into most freeway management systems. The Washington State Department of Transportation's Traffic Systems Management Center (TSMC) sponsored the original study. The investigation also led to a recommendation to replace the original TSMC definition of congestion or forced flow conditions with a more reliable indicator. Although, the TSMC has recently implemented a more advanced prediction system based on fuzzy set theory and neural networks to further identify patterns and rules for ramp metering strategies, the findings presented here continue to be constructive to freeway managers looking for quick and easy analyses that rely solely on single‐loop detection systems. The Seattle Area freeway study section used for the original study was the portion of mainline 1–5 northbound starting at the downtown Seattle Station 108 and ending at the Mountlake Terrace Station 193. Several days' worth of volume and lane‐occupancy data were collected for the afternoon time period from 2:30 p.m. to 6:30 p.m. Time intervals of 20 seconds were chosen for each data collection period. Important products of this research include the following:

• simple, and more reliable criterion for the definition of “bottleneck” or forced flow conditions than that originally used by the TSMC.
• simple, and reliable criterion for predicting impending “bottlenecks” or forced flow conditions.
• A proposed variable for improved selection of the appropriate metering rate. (Further analysis of the use of this variable for determining metering rates is recommended for future studies.

The proposed criteria are simple and easy to incorporate into current freeway management computer systems. Further investigation of freeway performance measurement using volume and occupancy data obtained from single‐loop systems is currently being performed.     

A conceptual and methdological framework for the generation of activity-travel patterns

This paper develops a conceptual framework for the generation of activity and travel patterns in the context of more general structures and presents an integrated model system as a step toward development of an improved travel demand forecasting model system. We propose a two-stage structure to model activity and travel behavior. The first stage, the stop generation and stop/auto allocation models, consists of the choices for the number of household maintenance stops and the allocation of stops and autos to household members. The second stage, the tour formation model, includes the choices for the number of tours and the assignment of stops to tours for each individual, conditional on the choices in the first stage. Empirical results demonstrate that individual and household socio-demographics are important factors affecting the first stage choices, the generation of maintenance stops and the allocation of stops and autos among household members, and the second stage choices, the number of tours and the assignment of stops to tours. This revised version was published online in June 2006 with corrections to the Cover Date.     

Fatigue damage calculation for oil tanker and container ship structures

The fatigue behaviour of longitudinal stiffeners of oil tankers and container ships, subjected to dynamic loads, is analysed. The following dynamic load components are considered: hull girder vertical wave bending moment, alone and combined with the horizontal wave bending moment, hydrodynamic pressure and inertial forces caused by cargo acceleration.

The spectral method was selected to calculate the fatigue damage, based on S—N curves and Miner's rule. Following this approach, the fatigue damage may be calculated as a function of a stress parameter Ω_p, which represents the cumulative effect of wave induced loads in the unit of time and incorporates the combined effects of stress level and its occurring frequency.

Simple formulas for Ω_p of oil tankers and container ships are given, obtained from the results of hydrodynamic analyses performed on several ships, in different wave environments.

Several examples show the applicability of the methods to real ship structures. The method, however, still needs to be calibrated because of the simplifying hypotheses introduced in the loading conditions.