Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.     

管道惯性测绘系统研制及应用

针对管道中心线地理坐标信息的测量需求,基于惯性导航原理,研制了以管道内检测器为载体的管道中心线测绘内检测设备,并将其与漏磁内检测器结合进行工程应用。选取了5处已知点对测绘结果进行了验证,测绘结果和实际验证结果表明:研制的惯性导航内检测器能够准确测绘管道中心线轨迹坐标,在校验点间距约为2 km时,5个距校验点约1 km的已知点的平均测绘误差约为1.8 m;通过将惯性导航检测器与漏磁检测器的组合使用,可有效获取管道缺陷的地理坐标信息,提高了管道内检测缺陷检测定位的精度。     

人脸识别系统在重庆轨道交通公安系统中的应用

结合重庆轨道交通公安分局人脸识别系统建设的情况,分析了基于视频流的人脸识别系统在重庆轨道交通中的应用,重点阐述了人脸识别系统在重庆轨道交通公安系统中的基本构成,并详细分析了人脸识别系统在重庆轨道交通公安系统中的重要作用.     

基于下游大水位变率的下水式垂直升船机随动技术的设计与实现

下游航道水位变率大,快速适应水位变化的准确停位随动技术,对下水式升船机的传动控制很重要.本文介绍下水式垂直升船机随动控制技术.首先,对控制对象的特性进行分析,描述了系统的速度运行曲线,对位置控制功能进行了研究.然后,搭建试验平台对本控制方案的性能进行了测试,给出了测试的方法和试验结果.实验结果表明本控制系统具有定位精度高、响应速度快等优点,能够适应下游大水位变化率的下水式垂直升船机准确停位要求.     

基于SoftPLC的船舶主机遥控物理仿真模拟器设计

模拟器以一艘1600 TEU集装箱船使用的Autochief IV主机控制系统作为原型,采用SoftPLC实现对船舶主机遥控物理仿真模拟器的控制。利用组态软件PIMS作为上位机开发平台,实现数据的存储及功能的完善。在模拟器上可以进行各种相关的训练操作,达到培训学员的目的。     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

VVL耦合喷油策略对GDI汽油机混合气形成的影响

利用三维仿真软件Ansys Fluent建立了GDI汽油机的仿真计算模型,就变气门升程耦合不同喷油策略对缸内气流运动和混合气形成的影响进行了模拟计算。结果表明,与大气门升程工况相比,小气门升程工况的缸内湍流运动强度、燃油蒸发和湿壁情况以及点火时刻混合气质量都明显改善;在小气门升程工况,采用两段喷油会缩短油气混合时间,过度推迟二次喷油时刻会恶化混合气质量和燃油湿壁情况;在大气门升程工况,两段喷油会改善混合气均匀性,随着二次喷油时刻推迟,燃油蒸发量增加,湿壁情况加剧,混合气质量得到改善;小气门升程工况下采用二次喷油时刻为470°曲轴转角,前后两次喷油量比例为7∶3的两段喷油方案在燃油蒸发和湿壁以及点火时刻缸内混合气质量这几个方面的效果都很好,是最合理的方案。     

基于GSM短消息的木材运输码单稽查系统

为解决因网络无法延伸到达林区作业现场而无法实时荻取运输数据问题,作者应用手机短信技术研究和构建了适合于南方林区特点的县级木材运输稽查管理网络系统。本文着重分析手机短信检尺码单信息处理系统的组成、短信平台的特点与选择、信息编码的格式与计算方法,详细论述了系统软件设计方法、长短信处理技术、稽查数据的短信格式和系统运行模式．系统的应用显著提高了木材运输稽查管理水平和工作效率,有良好的推广前景。