补偿电容的测试与分析

秦沈线自秦皇岛站至沈阳北站，全长404．6kin。其中新修里程约394km，车站采用法国的SEI计算机联锁系统，它将车站联锁与列车运行控制合二为一，实现了列控联锁一体化。区间采用UM2000无绝缘轨道电路，上行载频2000，2600Hz，下行载频1700，2300Hz；每个电气绝缘节设1个空心线圈SVAC、2个调谐单元BU和2个补偿调谐单元DB。     

信号联锁试验信息管理系统

信号联锁试验是信号维护过程中确保行车安全的一项关键技术。随着设备技术的更新，利用“天窗”点对信号设备的集中维修已成为当前维修方式中的主流。传统的联锁试验方式较现在的维修体制就显得相对滞后。为此新研制了信号联锁试验信息管理系统。     

河船目测船位的原理及应用

船舶航行在海洋上是用天文航海、地文航海、雷达、电测向仪和GPS等方法测定船位,将测定的船位绘在海图上再制定航向,船按该航向航行.内河航道狭窄、弯曲,要求驾驶员时刻掌握本船在航道上的位置,以正确的航向航行,安全地操纵船舶.     

Asymptotic field of mode Ⅱ dynamic growing crack in visco-elastic material

A mechanical model of visco-elastic material is established in order to investigate viscous effect in dynamic growing crack-tip field of mode Ⅱ. It is shown that in stable creep growing phase, elastic deformation and viscous deformation are equally dominant in the near-tip field, the stress and strain have the same singularity, namely, (σε) ∝r^-1/(n-1). The asymptotic solutions of separatied variables of stress, stain and displacement in crack-tip field are obtained by asymptotic analysis, and the results of numerical value of stress and strain in crack-tip field are obtained by shooting method. Through numerical calculation, it is shown that the near-tip fields are mainly governed by the creep exponent n and Mach number M. By the asymptotic analysis to the crack-tip field, the fracture criterion of mode Ⅱ dynamic growing crack of visco-elastic materials is put forward from the point of view of strain.     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

兔眼环孢霉素A缓释微球的眼内释药性研究

目的建立兔眼房水中环孢霉素A缓释微球的高效液相测定方法,考察在不同给药剂量下兔眼房水中的药物代谢特性,为该药预防后发性白内障提供理论依据。方法兔眼行晶体囊外摘除,左眼前房及囊袋内注射环孢素微球,右眼给予空白微球作对照,采用高效液相色谱法监测给药后4周内兔眼房水中环孢霉素A的浓度。色谱柱为反相C18硅胶柱,柱温为60℃,流动相为乙腈-水(67∶33),检测波长210nm。结果兔眼房水中环孢霉素A的浓度在0.13-1.25mg/L范围内呈良好线性关系(r=0.9951),最低检测浓度0.13mg/L,回收率95.91%,日间和日内精密度均小于5.0%。缓释微球的释药速率适中,兔眼前房给药后可在2周内维持较高浓度,高低两种给药剂量下,环孢霉素A的吸收半衰期(t1/2Ka)和血浆清除速率(CL)经检验无统计学差异,药时曲线下面积(AUC)和峰浓度(Cmax)与剂量之间线性相关。结论环孢素A缓释微球在兔眼内有较高的生物利用度,实验期内可达到抑制后发性白内障的有效浓度。     

藻菌共生体系对镇江市金山湖湖水的异位修复模拟研究

根据镇江市金山湖湖水的水质配制了模拟湖水,考察了小球藻、栅藻、铜绿微囊藻和聚球藻对模拟湖水中总氮(TN)、总磷(TP)和化学需氧量(COD)的去除效果,筛选出小球藻作为优势藻种.文中研究了小球藻的初始密度对模拟湖水中TN、TP和COD去除效果的影响.结果表明:小球藻初始密度为5×106个/m L时对TN、TP和COD的去除效果相对较好,在72 h内去除率分别可达55.1%,96.2%和55%.文中还对藻菌共生体系修复模拟湖水的效果进行了研究,确定了最佳藻菌体积比为1∶2时,TN,TP和COD的去除率分别达到62.4%,97.2%和96.2%.结果表明:藻菌共生体系可有效地对富营养化湖水进行异位修复.     

我国城际铁路建设投融资问题

城际铁路在国民经济和社会发展中发挥着重要作用,但在投资主体由"部省合作"向"地方主导"转变的过程中,出现了建设资金不足、资金筹措方式单一、可持续发展压力大等问题。本文通过对珠三角地区、京津冀地区、成渝地区等典型地区城际铁路建设投融资模式的调查研究,分析当前城际铁路投融资模式存在的主要问题,并研究提出相关的措施建议。     

国土空间规划背景下的北京城市交通体检评估

为了确保城市总体规划的落实,城市体检机制应运而生.在国土空间规划的新形势下,北京城市交通体检面临着新的要求.从规划实施过程把控、全市域规划实施情况、交通系统全周期实施情况三个角度分析交通体检的挑战与机遇.根据北京城市交通体检的实践情况,总结城市体检工作的组织模式和交通体检主要内容.最后,从多源数据持续监控交通系统、固定...     

南京地铁车辆合成闸瓦技术方案探讨

分析了国内外铁路车辆应用的合成闸瓦技术,并对地铁车辆使用的合成闸瓦特点进行探讨.提出研究聚合物基复合摩阻材料的地铁车辆合成闸瓦初步技术方案,重点解决适用于地铁车辆制动工况的关键技术,包括耐热高聚物的改性和应用研究、增强材料的应用研究和设计材料结构与性能,并对合成闸瓦的生产工艺进行初步探讨.