单件小批量生产企业的P—M生产模型研究

根据单件小批量生产企业复杂产品生产的特点，综合ＰＥＲＴ和ＭＲＰ－Ⅱ两者的优点，提出Ｐ－Ｍ计划方法。这种方法既可以对产品上层部件进行优化排程，又可以对下层零部件进行有效管理，可以较好地解决这类企业当前管理模式中ＰＥＲＴ太粗与ＭＲＰ－Ⅱ太死的矛盾。     

新型内燃、电力机车冰箱系统

阐述了以智能功率模块（ＩＰＭ）为逆变元件的新型内燃、电力机车冰箱系统的设计、工作原理、硬件实现方法以及控制软件流程     

A capacity restraint transit assignment with elastic line frequency

This paper proposes a new formulation for the capacity restraint transit assignment problem with elastic line frequency, in which the line frequency is related to the passenger flows on transit lines. A stochastic user equilibrium transit assignment model with congestion and elastic line frequency is proposed and the equivalent mathematical programming problem is also formulated. Since the passenger waiting time and the line capacity are dependent on the line frequency, a fixed point problem with respect to the line frequency is devised accordingly. The existence of the fixed point problem has been proved. A solution algorithm for the proposed model is presented. Finally, a numerical example is used to illustrate the application of the proposed model and solution algorithm.     

消氢催化剂的应用研究

通过对Pb／Al2O3，Pb/MnO2、Pd／C、Pd／TiO2四种消氢催化剂在不同条件下失效时间的试验研究，得出了温度、反应时间、和含钯量对催化剂失效时间的影响。试验结果表明：本文所用四种催化剂在脱氢反应中必须加温才能保持活性，否则要定期进行活化再生。     

加快发展我国托盘运输的建议

我国国家标准《物流术语》对托盘(pallet)的定义是:用于集装、堆放、搬运和运输的放置作为单元负荷的货物和制品的水平平台装置。作为与集装箱类似的一种集装设备,托盘现已广泛应用于生产、运输、仓储和流通等领域,被认为是20世纪物流产业中两大关键性创新之一。托盘作为物流运     

基于PROFIBUS-DP的直流传动控制系统在翻车机中的应用

1 系统要求及构成 日照港的自动化翻车机系统包括翻车机、定位车、推车机3部分.其中翻车机由2台80 kW的卧式直流电机驱动,定位车由7台80 kW的立式直流电机驱动,推车机由2台80 kW的立式直流电机驱动.     

Delay Restoration of Single-Track Railway Rescheduling

On the basis of analysis of the principle of delay restoration in a disturbed schedule, a heuristic algorithm for rescheduling trains is developed by restoring the total delay of the disturbed schedule. A discrete event topologic model is derived from the original undisturbed train diagram and a back propagation analysis method is used to label the maximum buffer time of each point in the model. In order to analyze the principle of delay restoration, the concept of critical delay is developed from the labeled maximum buffer time. The critical delay is the critical point of successful delay restoration. All the disturbed trains are classified into the strong-delayed trains and the weak-delayed trains by the criterion of the critical delay. Only the latter, in which actual delay is less than its critical delay, can be adjusted to a normal running state during time horizon considered. The heuristic algorithm is used to restore all the disturbed trains according to their critical details. The cores of the algorithm are the iterative repair technique and two repair methods for the two kinds of trains. The algorithm searches iteratively the space of possible conflicts caused by disturbed trains using an earfiest-delay-first heuristics and always attempts to repair the earliest constraint violation. The algorithm adjusts the weak-delayed trains directly back to the normal running state using the buffer time of the original train diagram. For the strong-delayed trains,the algorithm uses an utility function with some weighted attributes to determine the dynamic priority of the trains, and resolves the conflict according to the calculated dynamic priority. In the end, the experimental results show that the algorithm produces ＂good enough＂ schedules effectively and efficiently in disturbed situations.     

码头堆场设备选型

码头堆场起重机主要分轨道式和轮胎式两种型式,码头在选型时必须十分谨慎,因为一旦确定,以后相当长一段时间内就不能轻易改动.     

对新建时速250km客货共线铁路最小曲线半径与缓和曲线长度标准的建议

结合远期提速的可能性与运输模式,对近期实行高中速客货车250/120 km/h匹配混跑,最终实现高中速客货车300/160 km/h匹配混跑或全高速300 km/h的速度目标值分别进行最小曲径半径与缓和曲线长度的计算与分析,并提出相应速度匹配的设计标准。