整车管路布置及质量控制研究

整车管路按照区域分为发动机舱、底盘和乘客舱管路,发动机舱和底盘管路处于整车恶劣运动环境下,而且种类繁多,材料特性不尽相同,确保管路在极端情况运动不干涉、不磨损,耐久性和可靠性显得尤为重要。文中从6大原则对管路进行了深入探讨:管路基本类型、管路布置方法、CAE管路虚拟模拟、管路外观质量、管路布置质量验证和管路质量管理方法。     

面向高速公路车辆切入场景的自动驾驶测试用例生成方法

为在自动驾驶汽车基于场景的测试中生成涵盖相应场景中复杂多变的真实交通运行过程的测试用例,从highD数据集中提取车辆切入场景的多个实际样本,通过分析运动参数和参与车辆之间的位置关系,建立车辆切入场景的描述模型,根据切入点的碰撞时间评估该方案的风险程度,并结合描述模型中参数的分布,采用蒙特卡罗方法生成测试用例。结果表明,生成的车辆切入测试用例能够覆盖所有风险等级,可较好地支持自动驾驶测试。     

基于韧性理论的盾构隧道智能建造北大核心CSCD

以盾构隧道为主的城市轨道交通在十三五期间已取得了跨越式的进步,盾构掘进设备在智能化方面取得了飞速发展,但隧道结构设计、结构制造和现场管片拼装的智能化方面,仍需要大的创新与突破。面对建设韧性智慧城市的战略目标,盾构隧道还存在系列问题亟需解决,如对于新材料的物性认识浅、理论少;传感的布置缺乏针对性,监测感知差;隧道管片拼装大量依靠人工,误差大。解决这些问题的关键在于构建一个基于韧性理论的智能化盾构隧道建造系统,通过利用材料和结构的韧性特点,结合计算机等信息技术,采用韧性设计、智能感知、智能制造、智能拼装等一系列措施,使得隧道结构中的材料可智能感知、结构可精准监测、数据可实时孪生、信息可高效管理、制造可自动操控、过程可全域感知、模型可动态调节、管片可智能拼装,最终实现韧性城市的盾构隧道智能化建设。     

大直径盾构隧道穿越建筑物群变形分析与控制措施北大核心CSCD

大直径盾构隧道掘进施工对土体造成扰动,导致地表产生沉降或隆起,继而严重威胁上部建筑物群的结构安全。文章依托某大直径盾构隧道穿越老旧小区密集建筑物群工程,首先利用二维有限元软件计算关键断面房屋的沉降变形,再对比三维有限元软件的计算结果,分析两种计算方法的适用范围;然后基于三维模型探究了不同初期荷载释放率对盾构穿越引起的地表和房屋变形的影响,最后利用Peck公式计算的理论地表沉降数据,梳理初期荷载释放率、地表沉降、地层损失率三者的内部联系并提出了控制变形的相关措施。研究结果表明,初期荷载释放率越小,地表及房屋沉降也越小,对应的地层损失也越小;对于控制地表变形,减小荷载释放率等同于减小地层损失率;初期荷载释放率、地表沉降、地层损失率这三者减小的量值呈线性关系。     

Impact of pricing and transit disruptions on bikeshare ridership and revenue

Transportation - Bikeshare operators routinely explore options to improve ridership and revenue by studying interaction among pricing, service and operations. The objective of this research is to...     

Calibrating travel time thresholds with cluster analysis and AFC data for passenger reasonable route generation on an urban rail transit network

Transportation - Estimating the route choice patterns for transit passengers is important to improve service reliability. The size and composition of a route choice set affects the choice model...     

Aerodynamic characteristics of airship Zhiyuan-1

An airship named ＂Zhiyuan-l＂ was designed/fabricated/flied as a technical demonstration for stratospheric airship during 2007--2009 by Shanghai Jiaotong University. The calculation method and procedure of aerodynamic parameters were introduced, and the optimized configuration of the hull and the aerodynamic layout were given in this paper. Wind tunnel tests with different configurations, different pitch angles and different yaw angles were performed to study the wind load characteristics of the rigid model of the airship ＂Zhiyuan-1＂ in the φ3.2 m wind tunnel at China Aerodynamics Research ＆ Development Center. Also the numerical calculation about the test model was carried out to investigate the aerodynamic behavior. According to the results of wind test and numerical calculation, the excellent hull configuration of the airship ＂Zhiyuan-1＂ with lower drag characteristic was confirmed, which is based on optimism of the Michel transition law. And the phenomena of pressure coefficient distribution were discussed according to the results of wind tunnel test and numerical calculation at different flight attitudes.     

Infrared and visible image fusion based on region of interest detection and nonsubsampled contourlet transform

In order to enhance the contrast of the fused image and reduce the loss of fine details in the process of image fusion,a novel fusion algorithm of infrared and visible images is proposed.First of all,regions of interest(RoIs)are detected in two original images by using saliency map.Then,nonsubsampled contourlet transform(NSCT)on both the infrared image and the visible image is performed to get a low-frequency sub-band and a certain amount of high-frequency sub-bands.Subsequently,the coefcients of all sub-bands are classified into four categories based on the result of RoI detection:the region of interest in the low-frequency sub-band(LSRoI),the region of interest in the high-frequency sub-band(HSRoI),the region of non-interest in the low-frequency sub-band(LSNRoI)and the region of non-interest in the high-frequency sub-band(HSNRoI).Fusion rules are customized for each kind of coefcients and fused image is achieved by performing the inverse NSCT to the fused coefcients.Experimental results show that the fusion scheme proposed in this paper achieves better efect than the other fusion algorithms both in visual efect and quantitative metrics.     

基于原型批评理论的武侠人物分析

摘要原型批评理论是在以研究文学与神话等原始文化关系的基础上的一种批评模式。本文指出的中国武侠就是自己独特的原始文化,并在结合原型批评理论基础上,对武侠《天龙八部》中三位主要人物萧峰、段誉和虚竹进行了原型剖析,重点突出中国人的武侠情结。本文通过根据中国神话人物的模型,对武侠人物进行了新的诠释。     

摩托车疲劳耐久台架试验与寿命预测研究

疲劳耐久性是直接影响摩托车行驶安全的重要性能,摩托车生产企业非常有必要针对每款新车开展疲劳耐久性试验。以某款摩托车为例,进行路谱采集和疲劳耐久试验,采集车架上某关键部位的应变监测信号,探索采用S-N曲线和Miner线性累积损伤理论对车架寿命进行预测。通过试验表明,台架耐久试验相比道路耐久试验更高效、更安全,为摩托车的疲劳耐久试验和车架的优化设计提供了参考依据。