Exposure to noise inside transit buses in Kuwait: Measurements and passenger attitudes

Noise levels were measured, for the first time, inside 115 randomly selected transit buses, operating on 12 sample representative routes in Metropolitan Kuwait. Simultaneously with the monitoring of noise levels, the attitudes of 679 riders concerning the annoyance and long-term health impacts of noise were also surveyed. The noise and passenger attitude data were collected over 10 months (March - December 2000). The percentile distribution, equivalent noise level, traffic noise index and noise pollution levels inside four types of transit buses are presented. Riders' perceived annoyance and awareness of the long-term health impacts of noise were also determined and are discussed. The level of service and performance deficiencies of the public transit system in Kuwait, as perceived by its passengers, are also identified. A number of recommendations end the paper.     

作用在双圆柱桩上波浪力准确解和有限差分解的比较

The wave force exerted on vertical piles of offshore structures is the main criterion in designing them.In structures with more than one large pile,the influence of piles on each other is one of the most important issues being concerned in past researches.An efficient method for determining the interaction of piles is introduced in present research.First the wave force is calculated by the exact method using the diffraction theory,then in the finite difference numerical method the force is calculated by adding the velocity potentials of each pile and integration of pressure on their surface.The results showed that the ratio of the wave force on each of the double piles to a single pile has a damped oscillation around unity in which the amplitude of oscillation decreases with the increase in the spacing parameter.Also different wave incident directions and diffraction parameters were used and the results showed that the numerical solution has acceptable accuracy when the diffraction parameter is larger than unity.     

Cavitation passive control on immersed bodies

This paper introduces a new idea of controlling cavitation around a hydrofoil through a passive cavitation controller called artificial cavitation bubble generator (ACG). Cyclic processes, namely, growth and implosion of bubbles around an immersed body, are the main reasons for the destruction and erosion of the said body. This paper aims to create a condition in which the cavitation bubbles reach a steady-state situation and prevent the occurrence of the cyclic processes. For this purpose, the ACG is placed on the surface of an immersed body, in particular, the suction surface of a 2D hydrofoil. A simulation was performed with an implicit finite volume scheme based on a SIMPLE algorithm associated with the multiphase and cavitation model. The modified k-ε RNG turbulence model equipped with a modification of the turbulent viscosity was applied to overcome the turbulence closure problem. Numerical simulation of water flow over the hydrofoil equipped with the ACG shows that a low-pressure recirculation area is produced behind the ACG and artificially generates stationary cavitation bubbles. The location, shape, and size of this ACG are the crucial parameters in creating a proper control. Results show that the cavitation bubble is controlled well with a well-designed ACG.     

Timetable optimization models and methods for minimizing passenger waiting time at public transit terminals

This paper focuses on developing mathematical optimization models for the train timetabling problem with respect to dynamic travel demand and capacity constraints. The train scheduling models presented in this paper aim to minimize passenger waiting times at public transit terminals. Linear and non-linear formulations of the problem are presented. The non-linear formulation is then improved through introducing service frequency variables. Heuristic rules are suggested and embedded in the improved non-linear formulation to reduce the computational time effort needed to find the upper bound. The effectiveness of the proposed train timetabling models is illustrated through the application to an underground urban rail line in the city of Tehran. The results demonstrate the effectiveness of the proposed demand-oriented train timetabling models, in terms of decreasing passenger waiting times. Compared to the baseline and regular timetables, total waiting time is reduced by 6.36% and 10.55% respectively, through the proposed mathematical optimization models.     

Interactions between driver information,route choice,and optimal signal timing on a simple network

The interaction between driver information, route choice, and optimal traffic signal settings was investigated using a simple two-route system with a single “T” intersection and a fixed O-D demand. The logit model and the method of successive averages (MSA) were used to calculate the route choice probabilities and the stochastic equilibrium assignment. Given an assignment, signal settings which minimized average intersection delay were calculated; flow reassignment and new optimal signal settings were then obtained and this iterative process continued until convergence. The calculations were performed either directly in a combined assignment/signal optimization model or in stages using the output flows of an assignment model as inputs to TRANSYT-7F and iterating between the two models. Results show that a unique joint signal timing/assignment equilibrium is reached in all cases provided that a certain precision in drivers' perceptions is not reached. If driver information increases to this precision (bifurcation point) and beyond, results show clearly that the unique joint signal timing/assignment equilibrium no longer exists. In fact, three joint equilibria points exist after the bifurcation point. Two of these points are stable and one is not. It was found that the system yields the lowest total intersection delay when the joint equilibrium is such that all traffic and hence the major part of green time is assigned to only one of the two routes. Although this may not be feasible to implement in practice, the results indicate clearly for this simple example that there is a trade-off between a system with minimum total delay but no unique joint signal-settings/assignment equilibrium (achieved when drivers have nearly perfect information about the system) and a system with a unique joint equilibrium but with higher total delay (achieved when drivers have reasonably good but somewhat limited information). In most cases the second system seems appropriate for a number of practical reasons.     

An efficient sensitivity analysis method for modified geometry of Macpherson suspension based on Pearson correlation coefficient

The main purpose of this paper is to propose a new method for designing Macpherson suspension, based on the Sobol indices in terms of Pearson correlation which determines the importance of each member on the behaviour of vehicle suspension. The formulation of dynamic analysis of Macpherson suspension system is developed using the suspension members as the modified links in order to achieve the desired kinematic behaviour. The mechanical system is replaced with an equivalent constrained links and then kinematic laws are utilised to obtain a new modified geometry of Macpherson suspension. The equivalent mechanism of Macpherson suspension increased the speed of analysis and reduced its complexity. The ADAMS/CAR software is utilised to simulate a full vehicle, Renault Logan car, in order to analyse the accuracy of modified geometry model. An experimental 4-poster test rig is considered for validating both ADAMS/CAR simulation and analytical geometry model. Pearson correlation coefficient is applied to analyse the sensitivity of each suspension member according to vehicle objective functions such as sprung mass acceleration, etc. Besides this matter, the estimation of Pearson correlation coefficient between variables is analysed in this method. It is understood that the Pearson correlation coefficient is an efficient method for analysing the vehicle suspension which leads to a better design of Macpherson suspension system.     

Carpooling problem: A new mathematical model,branch-and-bound,and heuristic beam search algorithm

Carpooling is an environmentally friendly transportation system. It can efficaciously help resolve a variety of societal concerns of the urban areas, ranging from traffic congestion to environmental pollution. In this paper, we propose a new mathematical model to solve the carpooling problem. The model simultaneously minimizes the costs of travel times, the vehicle use, and the vehicle delays. An exact solution method based on Branch-and-Bound (B&B) algorithm is proposed to efficiently obtain the optimal solution of the problem. In order to find the near-optimal solutions for large-scale problems, a heuristic beam search algorithm is introduced, which is based on the partial relaxation of some fathoming criteria applied in our proposed B&B. The computational experiments are conducted, based upon the transportation network of Isfahan city, Iran. The results demonstrate the great capability of the proposed exact solution method in terms of both computational solving time required and the number of the evaluated nodes, in comparison with CPLEX software package. The findings of this research can be applied to solve the carpooling problem compatible to the real-life situations.     

An appropriate unidirectional wave spectrum model for the Strait of Hormuz

The objective of this paper is to introduce an appropriate unidirectional wave spectrum model for the Strait of Hormuz. The research is focused on assessing performance of standard wave spectrum models in the region. By evaluating such models based on valuable measurement data recently published, the calibration procedure has been conducted on such standard models to reach a better concordance between a modified standard spectral model and observed field spectra. The calibration is performed initially with respect to four distinct directions related to four available measurement stations. So, it results in four sets of coefficients for a nominated model. Next, it is continued to reach just one model insensitive to directions. Results clearly showed that the International Towing Tank Conference (ITTC) model is more appropriate than Joint North Sea Wave Project (JONSWAP) and Pierson and Moskowitz (PM) models in this area, even without any calibration. However, modifications have been successful on improving the conformity of the model.     

Numerical investigation of transmission of low frequency sound through a smooth air-water interface

It is the traditional belief that sound transmission from water to the air is very weak due to a large contrast between air and water impedances. Recently, the enhanced sound transmission and anomalous transparency of air-water interface have been introduced. Anomalous transparency of air-water interface states that the sound generated by a submerged shallow depth monopole point source localized at depths less than 1/10 sound wavelength, can be transmitted into the air with omni-directional pattern. The generated sound has 35 times higher power compared to the classical ray theory prediction. In this paper, sound transmission through air-water interface for a localized underwater shallow depth source is examined. To accomplish this, two-phase coupled Helmholtz wave equations in two-phase media of air-water are solved by the commercial finite element based COMSOL Multiphysics software. Ratios of pressure amplitudes of different sound sources in two different underwater and air coordinates are computed and analyzed against non-dimensional ratio of the source depth (D) to the sound wavelength (λ). The obtained results are compared with the experimental data and good agreement is displayed.     

Exciting forces for a wave energy device consisting of a pair of coaxial cylinders in water of finite depth

Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by these two cylinders,which were considered as idealization of a buoy and a circular plate,can be considered as a wave energy device.The wave energy that is created and transferred by this device can be appropriately used in many applications in lieu of conventional energy.Method of separation of variables was used to obtain the analytical expressions for the diffracted potentials in four clearly identified regions.By applying the appropriate matching conditions along the three virtual boundaries between the regions,a system of linear equations was obtained,which was solved for the unknown coefficients.The potentials allowed us to obtain the exciting forces acting on both cylinders.Sets of exciting forces were obtained for different radii of the cylinders and for different gaps between the cylinders.It was observed that changes in radius and the gap had significant effect on the forces.It was found that mostly the exciting forces were significant only at lower frequencies.The exciting forces almost vanished at higher frequencies.The problem was also investigated for the base case of no plate arrangement,i.e.,the case having only the floating cylinder tethered to the sea-bed.Comparison of forces for both arrangements was carried out.In order to take care of the radiation of the cylinders due to surge motion,the corresponding added mass and the damping coefficients for both cylinders were also computed.All the results were depicted graphically and compared with available results.