Neuro-Fuzzy Control of a Tracked Vehicle Featuring Semi-Active Electro-Rheological Suspension Units

This paper presents vibration control of a tracked vehicle installed with electro-rheological suspension units (ERSU). As a first step, an in-arm type ERSU is designed, and its spring and damping characteristics are evaluated with respect to the intensity of electric fields. Subsequently, a 16 degree-of-freedom model for a tracked vehicle equipped with the proposed ERSU is established followed by the formulation of a neuro-fuzzy controller. This controller takes account for both ride quality and steering stability by adopting a weighting parameter between two performance requirements. The parameter is appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the vertical speed of the body and the rotational angular speed of the wheel. Control performances to isolate unwanted vibration from bump and random road excitations are evaluated through computer simulations. In addition, maximum speed of the vehicle with 6 Watt power absorption is investigated with respect to the road roughness.     

应用有限元法研究车架结构的耐撞性

本文应用有限地对车辆正面碰撞过程中车架结构的大变形过程进行了计算机模拟。文中介绍了非线性有限元分析的基本方程，运用微机版ＤＹＮＡ３Ｄ软件，在合理简化的基础上，建立了车呆结构的有限元模型，通过计算机模拟，预测了车辆正碰过程中车架的变形位置和变形形式。针对存在的问题，对车架结构进行了改进设计。实车碰撞试验表明：改进后，车架结构的耐撞性有明显提高。     

Fatigue damage calculation for oil tanker and container ship structures

The fatigue behaviour of longitudinal stiffeners of oil tankers and container ships, subjected to dynamic loads, is analysed. The following dynamic load components are considered: hull girder vertical wave bending moment, alone and combined with the horizontal wave bending moment, hydrodynamic pressure and inertial forces caused by cargo acceleration.

The spectral method was selected to calculate the fatigue damage, based on S—N curves and Miner's rule. Following this approach, the fatigue damage may be calculated as a function of a stress parameter Ω_p, which represents the cumulative effect of wave induced loads in the unit of time and incorporates the combined effects of stress level and its occurring frequency.

Simple formulas for Ω_p of oil tankers and container ships are given, obtained from the results of hydrodynamic analyses performed on several ships, in different wave environments.

Several examples show the applicability of the methods to real ship structures. The method, however, still needs to be calibrated because of the simplifying hypotheses introduced in the loading conditions.     

Improvements in Dynamic Characteristics of Automobile Suspension Systems Part 1. Two-Mass Systems

In a previous paper, [3] the random vibrations of simple linear models of automobile suspension were solved with respect to seat elasticity and human sensitivity to vibrations. The present study uses more realistic linear models taking into account the unsprung mass.

Two configurations of masses are investigated: a two-mass system consisting of a sprung mass and an unsprung mass, and a three-mass system having an additional mass which acts as a vibration absorber. The gain in comfort obtained by lowering the natural frequency of the sprung mass is calculated for various two-mass and three-mass models along with other characteristics such as the dynamic tyre load, spring and damper forces and relative motion of the masses.     

The design of liner shipping serives: the problem of feeder services versus multi-port-calls

In this paper, the authors outline the structure of liner shipping systems with special emphasis on the question of whether feeder services are superior in economic terms to the more traditional and commonly-used multi-port-calling system. They describe the theoretical advantages of the former over the latter, and develop a model by which the optimal conditions both operate in may be determined. This model is then applied to a real situation to ascertain whether the theory works in practice. They conclude that the shuuttle/feeder system is worthwhile only in exceptional circumstances when specific route characteristics—low trade density; hinterland generated cargo; inland position of port; and heavy congestion—coexist. Despite the expense of multi-port-calling, it remains the most practical solution to the thin trade problem.     

Roll Dynamics of Commercial Vehicles

An analytical model is developed here for studying the roll dynamics of commercial vehicles. Large displacements and rotations are accounted for in this nonlinear model so that it can be used for the study of roll dynamics well beyond the limits of wheel lift-off. The model is used to illustrate some of the dynamic phenomena in vehicle rollover, especially the interactive coupling between the roll and the vertical modes of motion. The influence of suspension backlash on rollover resistance is demonstrated, and the phenomenon of roll motion resonance is illustrated to suggest new means for evaluating vehicle rollover sensitivity.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Towards integrated traveller information

Traveller information provision has become a key government priority in the UK following the publication of its Transport White Paper in July 1998. Developments are already underway for the integration of information systems across different public transport modes and between public transport information systems covering different regions. The Highways Agency (which is responsible for managing the strategic road network in the UK) is also advancing in its development of information databases and systems for the motorist. This paper considers the prospect of providing travellers with multimodal information with integration of driver information with public transport information. If such integration can be achieved then travellers, and in particular drivers, have the prospect of being presented with comparable information on travel options across modes. An integrated information service has a great potential to inform and influence travel choices. The paper considers the issue of travel choices and the role that information can play particularly in the context of mode choice. The political (UK) and technological climate for information provision is outlined. The paper identifies issues that will need to be addressed to identify the requirements from, and potential benefits of, integrated information, and the obstacles and challenges likely to be faced in moving towards it. Driver reactions, in particular, to the prospect of integrated information provision are fundamental to the assessment of its potential importance and value.     

A linear programming approach to conjoint measurment and trade-off analysis

There has been increasing attention placed on decomposition techniques such as conjoint measurement and trade-off analysis. Existing algorithms for both approaches use non-linear estimation techniques. In this paper, a linear integration rule is proposed along with a linear programming algorithm which is used to estimate part-utilities by minimizing the sum of the absolute deviations subject to monotonicity constraints. The algorithm was tested on simulated data and empirically. It was found that the algorithm performed well, especially when data are consistent with initial assumptions.