A Computational Procedure for Non-Linear Dynamic Analysis of Vehicles

In the research and design of vehicles, the accurate simulation of their dynamic behaviour is often of interest. Therefore, on the one hand, the non-linear properties of suspensions and tyres may not be neglected. On the other hand, the application of large mechanical models is necessary in order to get correct information about the local dynamic behaviour of critical parts or elements of vehicles. With regard to these requirements, in this paper, a special computational procedure is presented for the non-linear dynamic analysis of vehicles using large finite element models. Correctness, in comparison to COSMOS/M commercial finite element program, and applicability of the presented procedure is shown by the use of a bus finite element model containing 2214 degrees of freedom.     

An optical tire contact pressure test bench

An optical tire contact pressure test bench developed by the IMMa group is described. The measurement system is based on the frustration of total internal reflection (FTIR) of light. The test bench allows performing normal pressure distribution and patch contact shape measurements on passenger car tires. The system is based on the use of a laterally illuminated glass on which the tire leans. Between them a plastic interphase is located that will cause the FTIR of light. A video camera catches the formed shining image through the glass. The brightness level in each pixel of the image can be related to the existing normal pressure. The study of the contact patch provided by the bench makes it possible to characterize tire behaviour under different loading states, inflation pressure, tire defects and toe and camber angles. The bench incorporates a computerized load and control system of the tire operation parameters, an image acquisition module and a data acquisition system that allow monitoring and acting on the experimental variables of interest in the tests such as load on the tire and environmental conditions. A supporting mechanical system incorporated to the bench allows providing the tire with variable toe and camber angles. From the images obtained with this system, the maximum normal pressure points, total force, size and shape of the patch can be determined, which are related to the tire-use conditions. As an application example, results that show the patch size and shape under different load and tire inflation pressures are presented. A further application, which is the use of the system for the detection and study of defective tires is also presented.     

Understanding suburban travel demand: Flexible modelling with revealed and stated choice data

We analyse the choice of mode in suburban corridors using nested logit specifications with revealed and stated preference data. The latter were obtained from a choice experiment between car and bus, which allowed for interactions among the main policy variables: travel cost, travel time and frequency. The experiment also included parking cost and comfort attributes. The attribute levels in the experiment were adapted to travellers’ experience using their revealed preference information. Different model specifications were tested accounting for the presence of income effect, systematic taste variation, and incorporating the effect of latent variables. We also derived willingness-to-pay measures, such as the subjective value of time, that vary among individuals as well as elasticity values. Finally, we analysed the demand response to various policy scenarios that favour public transport use by considering improvements in level-of-service, fare reductions and/or increases in parking costs. In general, demand was shown to be more sensitive to policies that penalise the private car than those improving public transport.     

Variability of the shelf water off the northeast Spanish coast

During the seasonal stratification of 1983 and 1984, intensive sampling of the shelf region of the northeast Spanish coast was carried out. This unique dataset is used to define the most salient features of the shelf water dynamics. We show that region has a strong spatial and temporal variability associated with the southward spreading of continental waters from the Rhone river, in the northern gulf of Lyons. Southward spreading begins in early spring and was particularly obvious during June 1983 when strong horizontal density gradients were observed. Spreading almost completely disappears in August when observed upper layer salinities are uniform. We also show that significant shelf/slope water exchange takes place associated with the abrupt topographic canyons found in the region. In particular we observed in June 1983 a small positive geostrophic vorticity region at the Palamós canyon while a larger anticyclonic eddy was observed over the shelf south of this canyon. The biological implications of these two features have been demonstrated. We conclude indicating that in this region where no dominant winds exist, the shelf water dynamics is dominated by the southward spreading of low salinity continental waters and by the intrusion of high salinity open ocean water through submarine canyons.     

Measurement of hydrocarbon and carbon monoxide emissions during the starting of automotive DI Diesel engines

Most of hydrocarbon (HC) and carbon monoxide (CO) emissions from automotive DI Diesel engines are produced during the engine warm-up period and are primarily caused by difficulties in obtaining stable and efficient combustion under these conditions. Furthermore, the contribution of engine starting to these emissions is not negligible; since this operating condition is highly unfavorable for the combustion progress. Additionally, the catalytic converter is ineffective due to the low engine temperature. In conjunction with adequate engine settings (fuel injection and fresh air control), either the glow plugs or the intake air heater are activated during a portion of the engine warm-up period, so that a nominal engine temperatures is reached faster, and the impact of these difficulties is minimized. Measurement of gaseous pollutants during engine warm-up is currently possible with detectors used in standard exhaust gas analyzers (EGA), which have response times well-suited for sampling at such transient conditions. However, these devices are not suitable for the measurement of exhaust emissions produced during extremely short time intervals, such as engine starting. Herein, we present a methodology for the measurement of the cumulative pollutant emissions during the starting phase of passenger car DI Diesel engines, with the goal of overcoming this limitation by taking advantage of standard detectors. In the proposed method, a warm canister is filled with an exhaust gas sample at constant volumetric flow, during a time period that depends on the engine starting time; the gas concentration in the canister is later evaluated with a standard EGA. When compared with direct pollutant measurements performed with a state-of-art EGA, the proposed procedure was found to be more sensitive to combustion changes and provided more reliable data.     

Influence of shock absorber wearing on vehicle brake performance

In order to safely maintain a vehicle, it is necessary to verify the most important systems that affect safety during Periodic Motor Vehicle Inspections (PMVIs). In a previous paper, a test method and validation criteria were suggested by the authors to verify shock absorber status during PMVIs, as they are a fundamental component that may wear out during a vehicle’s life. In this paper, variations of the performance of the vehicle’s brakes resulting from shock absorber wearing have been analyzed, in order to confirm whether the suggested criteria is valid for taking into account longitudinal forces and pitch movement on the vehicle. A simulation-based study was conducted with several configurations of a worn damper on a vehicle driving on two virtual roads: smooth and undulating. The results confirmed that the damping coefficient established as an acceptable value to verify the shock absorber status in PMVIs is also valid considering the forces involved in a braking maneuver.     

Incentives to reduce port inefficiency: a theoretical approach

Over the last decades, the European Union (EU) has devoted a large amount of effort and money to projects aimed at boosting some of its maritime corridors as a modal alternative to road or rail freight transport. However, the overall design of most of these programmes has ex post revealed as very ineffective. This paper suggests that promoting port efficiency might be a more suitable target to increase the modal split of Short Sea Shipping (SSS) than subsidizing firms to transfer cargo from road to sea. But defining ‘port efficiency’ is a complex task and, therefore, granting money directly to port authorities could also generate perverse moral hazard effects, particularly when the improvements are difficult to monitor and many investments are non-refundable. The European Court of Auditors points out that millions of EU public port finance was wasted on empty terminal and other unused infrastructure. The objective of this paper is to design a proper subsidy to promote SSS by encouraging port improvements through a proper system of incentives. As a policy recommendation, in this paper we propose the development of a subsidy per inefficiency-reduction unit.     

TransMilenio BRT system in Bogota,high performance and positive impact – Main results of an ex-post evaluation

The paper presents the main characteristics, costs and impacts of TransMilenio, the bus based mass transit system of Bogotá, using BRT corridors and feeder services. An ex-post cost-benefit analysis is done, including monetary valuation of direct impacts on travel time and travel cost and externalities, such as improved road safety and air quality. Impacts on crime, land values, employment and tax revenue are also presented. The results are positive and robust; nevertheless, it is important to recognize that user perception has declined and there is urgent need to introduce service improvements. The paper also includes an ex-ante evaluation of the projected expansion using current costs, which indicates the need to limit construction capital costs. The results are an indication of the potential of BRT, and the evaluation methodology is applicable to other transit projects.     

Indicators for Evaluating the Impact of Artificial Islands on the Barcelona Coast

Artificial islands have been constructed next to large cities due to the need for extra space in highly populated areas. These emerged structures have been used by many countries as platforms for developing infrastructure (airports, harbors, highways, etc.), rebuilding ecological areas, and creating new spaces for tourism or residential areas. In this study, two state-of-the-art numerical models for wave propagation and nearshore circulation are used to simulate the effects of an emerged artificial island on the Barcelona coast. Several sea indicators (wave height, intensity and direction of currents, and mean water level) are analyzed to assess the changes likely to be induced by an artificial island. Three different situations are studied and the indicators are compared across the different tests to obtain information that can be used in the planning process of these structures. In two-meter wave conditions, the tests show that wave height is generally reduced in the sheltered area, which leads to improved safety for beach users (bathing is prohibited when wave height exceeds the two-meter threshold). However, the numerical models also reveal that velocities in the sheltered area usually decrease, which must be controlled to prevent stagnation in the bathing area.