排序方式: 共有24条查询结果,搜索用时 0 毫秒
1.
2.
3.
本文主要介绍了UFLP问题的一类变型问题,即在原UFLP问题上,加入新的约束条件。如工厂可以生产不同类型的产品,客户可以要求由不同的工厂为其提供不同的产品。我们称这种问题为多产品非受限工厂选址问题(MUFLP)。在实际生活和工作中,MUFLP是非常有用的问题模型。尤其是对某些设备造价昂贵且用途广泛,但同时又要满足客户对其使用需求的情况。 相似文献
4.
在船舶建造过程中,高频感应加热是实现船体板材高效高精度弯曲成形的重要方法。本文首先采用25KW新型高频感应加热设备,进行不同感应加热过程及工艺的实验,得到典型弯曲形式的船体外板(马鞍型和帆型)。同时,采用三坐标定位仪进行面外弯曲变形的测量和曲面重构,得到实验板材面外弯曲变形的分布和数值。通过热-弹-塑性有限元分析与弹性有限元分析两种方法,计算预测板材在高频感应加热作用下的面外弯曲变形;两种数值方法预测的板材面外弯曲变形趋势和数值与测量结果比较吻合,且在弹性有限元分析中,计算机资源消耗少,计算结果精度高。 相似文献
5.
在经历了机动化的迅猛发展给城市带来交通拥堵和环境污染等问题后,越来越多的城市为宜居性和环境可持续发展着想,主张打造步行友好的城市交通体系,全球主要城市相继推出"街道设计导则",从微观尺度指引街道空间重构。城市建成区既有步行系统的改善需要对既有步行网络设施进行全面客观的认识和评价,以发现问题并有针对性地改善步行空间。鉴于此,本文从步行者的主观感受和实际需求出发,提出了"连续、安全、便捷、舒适"四个维度共13个二级指标的评价体系,用于评价城市和街区尺度的步行系统,并以广州旧城区步行系统为例进行了评价,为重新认识广州旧城区步行系统现状提供了基础,也为今后步行系统改善的评价工作提供了借鉴。 相似文献
6.
以18.000 mm厚的船用AH36钢板为研究对象,开展电磁感应加热弯曲成型试验并测量板材的瞬态温度,采用手持式三维扫描仪获取板材点云数据,利用后处理软件得到板材面外弯曲变形云图。基于热-弹-塑性有限元分析,模拟板材电磁感应加热弯曲成型过程,温度和面外弯曲变形计算结果与测量数据较吻合,验证建立的数值模型的准确性。基于高通量的有限元分析,建立热源移动速度与横向弯曲角度的数学关系。针对单曲率板材,提出内接折线法和外切折线法拟合板材弯曲形状,给出相应的板材加热线位置和热源移动速度等工艺参数,进行热-弹-塑性有限元分析。计算结果表明,由提出的两种方法得到的面外弯曲变形均与目标曲率板的弯曲形状相吻合,证明内接折线法和外切折线法应用于实际工程的可行性。 相似文献
7.
8.
桂林铁路新客站站房的施工中,设计有4500多m2的玻璃幕墙,由于是变更设计,在主体结构施工时,没有预埋锚筋.根据<玻璃幕墙工程技术规范>第5.7.9条规定,允许采用后埋法施工.…… 相似文献
9.
10.
[Objectives]It is easy to produce buckling distortion when welding thin plate butt joints, which affects the construction period, cost and performance, but this can be controlled by applying external restraints. [Methods ] First, a butt welding test of a thin plate under external restraints is carried out, and the out-of-plane deformation is measured by the optical surface scanning method. At the same time, finite element (FE) models in a free state and external restraint state are established, and the thermal mechanical phenomena of the two models are subjected to thermal-elastic-plastic FE analysis (TEP FE). The influence of different external restraint distributions on the welding buckling distortion of the joints is then studied, and reasons for controlling welding buckling distortion are analyzed from the perspective of longitudinal plastic strain and longitudinal contraction force.[Results ] The out-of-plane deformation of the corresponding model is in good agreement with the measured results, and milder than the out-of-plane deformation of the model in a free state. When external restraints are applied, the longitudinal plastic strain of the weld and its adjacent metal decreases, and the longitudinal contraction force of the thin plate also decreases.[Conclusions ] The results verify that external restraints can effectively control welding buckling distortion, and the control effects are different depending on the external restraint distribution. © 2023 Chinese Journal of Ship Research. All rights reserved. 相似文献