Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Driver fatigue: a vision-based approach to automatic diagnosis

In this paper, we describe a system that locates and tracks the eyes of a driver. The purpose of such a system is to perform detection of driver fatigue. By mounting a small camera inside the car, we can monitor the face of the driver and look for eye movements which indicate that the driver is no longer in condition to drive. In such a case, a warning signal should be issued. This paper describes how to find and track the eyes. We also describe a method that can determine if the eyes are open or closed. The primary criterion for this system is that it must be highly non-intrusive. The system must also operate regardless of the texture and the color of the face. It must also be able to handle changing conditions such as changes in light, shadows, reflections, etc. Initial experimental results are very promising even when the driver moves his/her head in a way such that the camera does not have a frontal view of the driver’s face.     

Trip generation of vulnerable populations in three Canadian cities: a spatial ordered probit approach

This paper provides an analysis of trip generation of three vulnerable groups: single-parent families, low income households, and the elderly. It compares the mobility of these groups to that of the general population in three Canadian urban areas of Hamilton, Montreal and Toronto, based on data from large-sample metropolitan transport surveys. An ordered probit model with spatially expanded coefficients is used for the analysis. Spatial expansion shows that there are spatial mobility trends for elderly populations and low-income populations even after socio-economic attributes are accounted for. Such spatial differences are not generally found for single parent families. This novel spatial analysis provides clues as to where vulnerable populations may experience greater degrees of social exclusion. It provides information to help prioritize transportation infrastructure projects or other social programs to take into account the needs of vulnerable populations with the lowest levels of mobility.     

Evaluation of general aviation management at Denver Stapleton airport

The potential benefits of general aviation management at a major airport is examined in this paper. The three general aviation management techniques investigated are volume reduction, runway segregation and time restriction.

First, a methodology for analyzing these techniques is discussed. The various effects on each user group are quantified for economic comparison between each management technique attempted. A computer simulation model was used to measure the delay effects. Then, these techniques are applied to Denver Stapleton Airport to measure their effects in present and future scenarios.

The results show that the best general aviation management technique is volume restriction. The use of peak‐hour pricing mechanism provided better results than random rejection, particularly if only a small degree of diversion is desired. The construction of a new general aviation runway provided equivalent results to the best technique tested.     

Influence of vehicle driving parameters on the noise caused by passenger cars in urban traffic

In this work, a sample of vehicles has been instrumented to measure of variables that influence vehicle noise emissions in Madrid. A circuit reproducing a normal travel pattern in large city is traveled by a fleet of vehicle models representing the fleets of cars in a European city. A sample of drivers covers the test track under different traffic conditions. Driving parameters and noise emitted have been recorded in each test and average values have been extracted. These data have been analyzed to define the noise emissions produced by a vehicle in real driving conditions and to identify the noisiest driving behaviors.     

Are Longer and Heavier Vehicles (LHVs) Beneficial for Society? A Cost Benefit Analysis to Evaluate their Potential Implementation in Spain

Abstract

In this paper we carry out a thorough review of the current research related to the benefits and costs arising from the implementation of longer and heavier vehicles (LHVs). From this review we concluded that despite the many studies available, little has been said about the sensitivity of the benefits and costs to the ultimate performance of the key variables related to the evolution of the economy, road transport performance, safety, and so on. In order to fill this gap, we have designed a sensitivity approach based on a cost benefit analysis tool to determine which variables demonstrate the greatest influence on the benefits and costs stemming from the implementation of LHVs. In order to test the methodology, we have used it in an analysis of the Spanish trunk network. The results show that the benefits of LHVs for society are significant. Even in the least favorable scenario, the economic benefits are greater than €3500 million over 15 years, and the environment enhanced as well, for CO₂ emissions are reduced by 2 Million tonnes. Overall we noted how the results are not very sensitive to the evolution of key variables in determining the final outcome. However, we found that the variables that have the greatest affect on the final benefit, such as traffic growth and social discount rate, depend basically on the performance of the overall economy. Moreover, the private cost for haulers seems to be more important in determining the final benefit than externality costs.     

Evasive manoeuvres with a steering robot

In the pursuit of an objective rating on vehicle stability performance, it is always desirable to reduce disturbances and inconsistencies during experimental evaluations, especially the ones introduced by human drivers. This paper presents the development of a steering robot designed for closed-loop steering tasks during evasive manoeuvres. It describes the controller structure and discusses experimental results, in addition to simulation/vehicle model verifications and theoretical control analysis.     

基于工作空间的复杂公路工程BIM交付研究

在研究众多公路工程BIM实施方案相关资料的基础上,分析现阶段BIM建模至交付过程中存在设计协同、各专业间数据逻辑关联、成果质量、统一交付等多个难点,及这些难点导致的BIM建模不规范、过程不协同、交付不一致等技术问题;总结传统公路工程BIM交付中成果质量的影响因素,提出公路工程BIM工作空间模式管理BIM交付的新概念;以...     

Using a random displacement model to simulate turbulent particle motion in a baroclinic frontal zone: A new implementation scheme and model performance tests

Numerical artifacts can limit accurate simulation of turbulent particle motion when Lagrangian particle-tracking models are implemented in hydrodynamic models with stratified conditions like fronts. Yet, modeling of individual particle motion in frontal regions is critical for understanding sediment dynamics as well as the transport and retention of planktonic organisms. The objective of this research was to develop a numerical technique to accurately simulate turbulent particle motions in a particle-tracking model embedded within a hydrodynamic model of a frontal zone. A new interpolation scheme, the ‘water column profile’ scheme, was developed and used to implement a random displacement model for turbulent particle motions. A new interpolation scheme was necessary because linear interpolation schemes caused artificial aggregation of particles where abrupt changes in vertical diffusivity occurred. The new ‘water column profile’ scheme was used to fit a continuous function (a tension spline) to a smoothed profile of vertical diffusivities at the x–y particle location. The new implementation scheme was checked for artifacts and compared with a standard random walk model using (1) Well Mixed Condition tests, and (2) dye-release experiments. The Well Mixed Condition tests confirmed that the use of the ‘water column profile’ interpolation scheme for implementing the random displacement model significantly reduced numerical artifacts. In dye-release experiments, high concentrations of Eulerian tracer and Lagrangian particles were released at the same location up-estuary of the salt front and tracked for 4 days. After small differences in initial dispersal rates, tracer and particle distributions remained highly correlated (r = 0.84 to 0.99) when a random displacement model was implemented in the particle-tracking model. In contrast, correlation coefficients were substantially lower (r = 0.07 to 0.58) when a random walk model was implemented. In general, model performance tests indicated that the ‘water column interpolation’ scheme was an effective technique for implementing a random displacement model within a hydrodynamic model, and both could be used to accurately simulate diffusion in a highly baroclinic frontal region. The new implementation scheme has the potential to be a useful tool for investigating the influence of hydrodynamic variability on the transport of sediment particles and planktonic organisms in frontal zones.