ICE(R)系列新动车用 COBRA诊断系统--对车务人员和维修的创新支持

ICE 系列新动车ICE3、ICET、ICE TD采用了层级结构的诊断系统COBRA(Central On Board RailwayAssistant车载辅助中心),有各装置的自诊断和动车有关的上一级诊断.COBRA诊断系统有清晰的目标群取向,总是只向车务人员和维修人员提供重要的信息和可能的补救措施.在列车进段之前就对自动释放和经无线传输的诊断数据做了计算.列车一进段就准备好了维修人员和维修材料,例如更换损坏件和磨耗件,在进行清洁作业的同时为列车下一次运行准备好了良好的状态.     

铁路牵引用直驱式永磁同步电动机的无位置传感器控制

提出了一种表面式永磁同步电动机无位置传感器的控制方法,适用于要求逆变器利用率高且开关频率低等限制条件的大功率牵引驱动系统.采用含电机电压模型和电机电感模型的观测器,在低速时注入测试信号,可以得到位置和速度信号.阐述了基本估计方法的改进.在实验室用28 kW标准伺服电机成功地验证了该方法.     

轮轨作用力计算分析及其校核

文章对文献[1]中的车辆-轨道的计算模型以及轮轨接触力迭代求解方法进行了改进。算例分析表明:改进后的数值计算结果与文献[2、3]给出的测试和仿真分析结果具有较好的一致性。此外,利用有限元分析软件ANSYS进行了建模、分析和验证。     

The dynamics of traffic assignment and traffic control: A theoretical study

The paper considers traffic assignment, with traffic controls, in an increasingly dynamic way. First, a natural way of introducing the responsive policy, P_o, into steady state traffic assignment is presented. Then it is shown that natural stability results follow within a dynamical version of this static equilibrium model (still with a constant demand). We are able to obtain similar stability results when queues are explicitly allowed for, provided demand is constant. Finally we allow demand to vary with time; we consider the dynamic assignment problem with signal-settings now fixed. Here we assume that vehicles are very short and that deterministic queueing theory applies, and show that the time-dependent queueing delay at the bottleneck at the end of a link is a monotone function of the time-dependent input profile to the bottleneck. We have been unable to obtain results when dynamic demand and responsive signal control are combined.     

A linear programming approach to conjoint measurment and trade-off analysis

There has been increasing attention placed on decomposition techniques such as conjoint measurement and trade-off analysis. Existing algorithms for both approaches use non-linear estimation techniques. In this paper, a linear integration rule is proposed along with a linear programming algorithm which is used to estimate part-utilities by minimizing the sum of the absolute deviations subject to monotonicity constraints. The algorithm was tested on simulated data and empirically. It was found that the algorithm performed well, especially when data are consistent with initial assumptions.     

LM331在内燃机车检测中的应用

本文给出一种应用于内燃机车水阻测试台的主电压检测电路,该电路使用廉价的单片V/F转换器,通过光电耦合方式,既保证了检测电压的精度,又可有效防止各种干扰串入计算机控制系统。     

Implementing green supply chain practices: an empirical investigation in the shipbuilding industry

ABSTRACT

Environmental concerns have become important in the shipbuilding industry. Governmental expectations about environmental and social performance are much higher than in the past. Public authorities penalize companies that do not comply with the rules. Shipbuilding companies face these challenges by introducing new technologies into their business processes. They do not only start initiatives to green their own business processes but also those of their supply chain partners. This form of environmental management is called Green Supply Chain Management (GrSCM) and its importance is increasingly recognized. Although GrSCM is growing, companies are experiencing difficulties engaging suppliers in environmental activities.

This empirical study analyses drivers for supply chain participation of suppliers in the shipbuilding industry. We explain the participations of suppliers in GrSCM practice by investigating influencing factors including governmental involvement in greening the supply chain, customer requirements towards green issues, feeling of social responsibility, competitive advantage by going green, and GrSCM readiness. Hypotheses are tested with partial least squares, using survey data of 93 suppliers of two leading shipbuilding companies. We found GrSCM readiness, competitive advantage, and social responsibility to be significant drivers in supplier participation. No significant support was found for governmental involvement and customer requirements.     

A non-geometrically similar model for predicting the wake field of full-scale ships

The scale effect leads to large discrepancies between the wake fields of model-scale and actual ships, and causes differences in cavitation performance and exciting forces tests in predicting the performance of actual ships. Therefore, when test data from ship models are directly applied to predict the performance of actual ships, test results must be subjected to empirical corrections. This study proposes a method for the reverse design of the hull model. Compared to a geometrically similar hull model, the wake field generated by the modified model is closer to that of an actual ship. A non- geometrically similar model of a Korean Research Institute of Ship and Ocean Engineering (KRISO)’s container ship (KCS) was designed. Numerical simulations were performed using this model, and its results were compared with full-scale calculation results. The deformation method of getting the wake field of full-scale ships by the non-geometrically similar model is applied to the KCS successfully.     

Intermodal Transit System Coordination

In urban areas where transit demand is widely spread, passengers may be served by an intermodal transit system, consisting of a rail transit line (or a bus rapid transit route) and a number of feeder routes connecting at different transfer stations. In such a system, passengers may need one or more transfers to complete their journey. Therefore, scheduling vehicles operating in the system with special attention to reduce transfer time can contribute significantly to service quality improvements. Schedule synchronization may significantly reduce transfer delays at transfer stations where various routes interconnect. Since vehicle arrivals are stochastic, slack time allowances in vehicle schedules may be desirable to reduce the probability of missed connections. An objective total cost function, including supplier and user costs, is formulated for optimizing the coordination of a general intermodal transit network. A four-stage procedure is developed for determining the optimal coordination status among routes at every transfer station. Considering stochastic feeder vehicle arrivals at transfer stations, the slack times of coordinated routes are optimized, by balancing the savings from transfer delays and additional cost from slack delays and operating costs. The model thus developed is used to optimize the coordination of an intermodal transit network, while the impact of a range of factors on coordination (e.g., demand, standard deviation of vehicle arrival times, etc) is examined.