How Are Our MPAs Doing? Challenges in Assessing Global Patterns in Marine Protected Area Performance

Without effective management, protected areas are unlikely to achieve the high expectations the conservation and development sectors have for them: conserving biodiversity and alleviating poverty. Numerous marine protected area (MPA) assessment initiatives have been developed at various spatial and temporal scales, including the guidebook How is your MPA doing? These management assessments have been useful to sites to clarify and evaluate their objectives, yet efforts to examine broader regional or global patterns in MPA performance are only beginning. The authors conducted exploratory trend analyses on How is your MPA doing? indicator data collected by 24 MPAs worldwide to identify challenges and areas for future work. Wide variability across sites with regard to the indicators examined and the constructs used to measure them prevented a true meta-analysis. Managers assessed biophysical indicators more often than socioeconomic and governance constructs. Investment by the conservation community to support collecting and reporting high-quality data at the site level would enable a better understanding of the variation in MPA performance, clarify the contribution of MPAs to both biodiversity conservation and poverty alleviation, and help drive better MPA performance. The absence of rigorous and consistent monitoring protocols and instruments and a platform to turn raw MPA monitoring data into actionable information is a critical but under-recognized obstacle to cross-project learning, comparative analyses, and adaptive resource management.     

Failure modes in the maritime transportation system: a functional approach to throughput vulnerability

Maritime Transportation Systems (MTSs) are essential for world trade; it is crucial to understand how these systems may fail, to be able to maintain their capacity. In this paper, the MTS is seen as a throughput mechanism; a technical system which serves its purpose by moving goods for its dependents. Understanding which key functions and capabilities are prerequisite for the ability to move goods, the loss of which are the failure modes, allows for the creation of a ‘business continuity plan’ for the MTS. Through two surveys and interviews with maritime transportation industry stakeholders, it was observed that while stakeholders in the industry have a solid focus on frequent operational risks, there is a lack of awareness of vulnerabilities, as well as methods for addressing and planning for low-frequency high-impact disruption scenarios. The presented approach provides a structured set of matrices of the key functions of the MTS, allowing stakeholders to increase the system's resilience through preparing to restore this limited number of critical functions.     

Do Public Transport Improvements Increase Agglomeration Economies? A Review of Literature and an Agenda for Research

Public transport improvements may increase economic productivity if they enable the growth and densification of cities, downtowns, or industrial clusters and thereby increase external agglomeration economies. It has been argued that the potential agglomeration benefits are large; if so, understanding them better would be useful in making funding decisions about public transport improvements. We reviewed theoretical and empirical literature on agglomeration as well as a small number of articles on transportation's role in agglomeration. The theoretical literature is useful in understanding possible avenues by which transportation improvements might affect agglomeration, although there is little discussion of public transport specifically. Relevant empirical studies tend to focus on metropolitan regions and use a generalized measure of transportation cost. But public transport impacts on agglomeration are likely to be different from road investment impacts. We identified several ways of conducting research building on this literature that would help evaluate the agglomeration impacts of public transport proposals: tracing the links between transport, agglomeration, and productivity; better motivating research using theories of agglomeration mechanisms; taking scale and redistribution into account; exploring the functional form of agglomeration economies; accounting for endogeneity in model structure; and considering development context.     

Enablers and Barriers to the Adoption of Alternatively Powered Buses

Abstract

This paper seeks to identify enablers and barriers that stimulate or prevent the adoption of alternatively powered buses (APBs) in cities. The research method concentrates on an in‐depth analysis of 21 European demonstration case studies of APBs. Considerable differences exist between these cities due to the different reference situation. The type of measurement and the situation in the demonstration cities influence the exact fuel consumption and emission reduction. Variables that could enable the adoption of all types of APBs are: (1) the compatibility with previously introduced ideas; (2) the already available necessary supporting infrastructure in the city; (3) a changed external appearance of the APB; (4) the acceptance of the APBs by passengers and bus drivers; and (5) political support in the city regarding the APBs. The main variables that could be determined as barriers are: the relative economic advantage (the outline of costs is higher than that of conventional buses); and the understanding of the APB for bus drivers and mechanics (because special training is needed for both groups).     

Dynamic sensor zeroing algorithm of 6D IMU mounted on ground vehicles

The main focus of this paper is to compensate the steady state offset error of the 6D IMU which provides the measurements that include the vehicle linear accelerations and angular rates of all three axes. Additionally, the sensor compensation algorithm exploits the wheel speed data and the steering angle information, since they are already available in most of the modern mass production vehicles. These inputs are combined with the inverse vehicle kinematics to estimate the steady state offset error of each sensor inputs as it is done in a disturbance observer, and the raw sensor measurements are compensated by the estimated offset errors. The stability of the error dynamics regarding the integrated signal processing system is verified, and finally, the performance of the system is tested via experiments based on a real production SUV.     

Ship propulsion shafting bearing fault diagnosis based on holographic SDP similarity visual recognition北大核心CSCD

[目的]针对船舶推进轴系轴承的故障诊断问题,提出一种基于全息对称点图形(SDP)和相似性识别的可视化诊断方法。[方法]首先,多方位采集轴承振动信号,全面监测轴承发生故障时的规律性冲击在时域和频域中引起的非平稳性变化特征;然后,基于SDP对称点分布原理,将多个维度信号的时域和频谱融合至同一个二维图形,以放大信号之间的差异性;最后,基于相似性识别方法对轴承进行简易诊断。[结果]轴承故障实验平台的验证结果表明,该方法可以实现多个信号的有效图形融合,全面展示设备信号的状态特征,从而准确地诊断故障。[结论]研究成果可为船舶推进轴系轴承的可视化故障简易诊断提供参考。     

Development trend and key technologies of autonomous underwater vehicles北大核心CSCD

为推进和引导我国自主水下航行器(AUV)的发展,总结国内外AUV的研究现状,提出其系列化、集群化、体系化、大型化的发展趋势。重点探讨AUV总体多学科优化设计、结构与材料设计、动力与推进、导航与控制、探测与通信等关键技术,为更好地利用AUV经略海洋,从而实现“进入海洋、探测海洋、利用海洋”的战略目标提出发展意见。     

尾涡/固体边界交互作用下表面压力的数值模拟

当强劲的尾涡撞击到结构时,其表面压力将呈现大幅的变化.这种大幅变化的脉动压力是引起结构震动以及水动力噪声的主要原因之一.许多相关的工程领域都希望使用相对经济的方法对此压力脉动进行有效地预报.本文介绍一种已经嵌入一面元法程序(PROPELLA)的尾涡砰击模型,及其在一吊舱桨尾涡撞击支柱诱导表面压力模拟中的应用.由模拟的时均表面压力分布和相均压力的时序变化与对应的实验数据的比较来看,数值模拟与试验结果吻合较好.     

High-Speed Generators for Power-Dense, Medium-Power, Gas Turbine Generator Sets

Concepts to improve turbine generator (TG) set power density (PD) are identified, developed, and evaluated. The evaluation focuses on the TG set as a part of overall system optimization, with weight and volume penalties for special auxiliaries. PD is given priority, while other attributes such as efficiency, acoustics, and total system cost are also assessed. The strengths and weaknesses of each concept are assessed based on technical viability, potential for PD improvement, and risk. Sixty-one generator concepts over four generator types—air-cooled wound field, water-cooled wound field, permanent magnet (PM), and high-temperature superconducting (HTS)—are evaluated with three ship-level electrical distribution architectures—high-frequency AC and active- and passive-rectified DC. A prime mover of 14 MW at 7,000 r.p.m. is assumed. The study assesses generator size enabled by directly coupling the generator to the prime mover, eliminating the typical gear required in TG sets with engine speeds greater than 3,600 r.p.m. Technology approaches are described and trends in the design data are identified. Advanced PM and superconducting rotor technologies are evaluated. For the power, speed, and system requirements studied, these technologies do not differ significantly from water-cooled designs in size and weight. A water-cooled generator would be compatible with a range of future power distribution systems such as high-frequency AC, rectified DC, or 60 Hz AC (using a rectifier and an inverter).     

Mass balance of trace metals in the Adriatic Sea

A first order mass balance of six different trace metals (Mn, Fe, Pb, Zn, Cu, Ni) was presented for a 1-year period for the different compartments of the Adriatic Sea: compartment 1 (northern Adriatic Sea), compartment 2 (central Adriatic Sea and surface layer of the southern Adriatic Sea) and compartment 3 (deep water of the southern Adriatic Sea). The Adriatic Sea appeared to be a source of dissolved Cu, Mn and Fe for the Mediterranean Sea through the Strait of Otranto whereas for dissolved Zn and Pb the Adriatic Sea appeared to be a net sink. For dissolved Ni, inputs and outputs through the Strait of Otranto balanced each other. The residence times of all metals in compartment 1 were significantly shorter than that of water indicating significant removal. In compartments 2 and 3, residence times of Mn and Fe were relatively short suggesting removal from the water column whereas for the other metals their residence times were similar to that of water. Calculations of turnover times of metals with respect to different processes showed that in compartments 1 and 2, sedimentation was the main process that affected the content of the reservoirs whereas in compartment 3, the water flux exchanges played an important role for Zn, Cu and Ni.Most of the metals clearly undergo a very dynamic cycle of sedimentation/remobilization particularly in the Northern Adriatic Sea. In the northern Adriatic Sea, most of the Mn and Fe in deposited sediment were remobilized. This was related to diagenetic processes involving the utilisation and solubilisation of Mn and Fe oxides, which occur in the surface of the sediment in the northern Adriatic Sea. In the central Adriatic Sea, remobilization of Mn and Fe was less than in the northern Adriatic Sea, suggesting that diagenesis processes appear deeper in the sediment. Advective transport of sediment was a major source of metals for the deep basin. As much as 80% of the sediments in the South Adriatic Pit might be advected from the shelf. Remobilization fluxes in the South Adriatic Pit were significantly less than in the Northern and Central Adriatic Sea reflecting hemi-pelagic sediments.