交通方式可达性差距——衡量交通可持续发展的指数

交通因其消耗大量能源而在可持续发展中扮演着重要角色,为了规划交通可持续发展,有必要提出能够评估和衡量交通可持续发展的指数。利用可达性概念和地理信息系统提出交通方式可达性差距指数。该指数由人口数量、就业岗位数、商店数以及学校数等决定,根据公共交通方式和私人交通方式间可达性指数差异计算。就能源效率而言,公共交通方式比私人交通方式更能实现可持续。可达性差距指数越高意味着可持续能力越强。通过比较香港1991年和1996年的可达性差距指数,来检验交通发展的可持续性是否有所提升。最后,讨论了如何运用可达性差距指数来检验土地利用以及交通发展政策和方案,以便确定更可持续的政策和方案。     

Low temperature premixed combustion within a small bore high speed direct injection (HSDI) optically accessible diesel engine using a retarded single injection

An optically accessible single-cylinder high speed direct-injection (HSDI) Diesel engine equipped with a Bosch common rail injection system was used to study low temperature Modulated Kinetics (MK) combustion with a retarded single main injection. High-speed liquid fuel Mie-scattering was employed to investigate the liquid distribution and evolution. By carefully setting up the optics, three-dimensional images of fuel spray were obtained from both the bottom of the piston and the side window. The NOx emissions were measured in the exhaust pipe. The influence of injection pressure and injection timing on liquid fuel evolution and combustion characteristics was studied under similar fuel quantities. Interesting spray development was seen from the side window images. Liquid impingement was found for all of the cases due to the small diameter of the piston bowl. The liquid fuel tip hits the bowl wall obliquely and spreads as a wall jet in the radial direction of the spray. Due to the bowl geometry, the fuel film moves back into the central part of the bowl, which enhances the air-fuel mixing process and prepares a more homogeneous air-fuel mixture. Stronger impingement was seen for high injection pressures. Injection timing had little effect on fuel impingement. No liquid fuel was seen before ignition, indicating premixed combustion for all the cases. High-speed combustion video was taken using the same frame rate. Ignition was seen to occur on or near the bowl wall in the vicinity of the spray tip, with the ignition delay being noticeably longer for lower injection pressure and later injection timing. The majority of the flame was confined to the bowl region throughout the combustion event. A more homogeneous and weaker flame was observed for higher injection pressures and later injection timing. The combustion structure also proves the mixing enhancement effect of the liquid fuel impingement. The results show that ultra-low sooting combustion is feasible in an HSDI diesel engine with a higher injection pressure, a higher EGR rate, or later injection timing, with little penalty on power output. It was also found that injection timing has more influence on HCCI-like combustion using a single main injection than the other two factors studied. Compared with the base cases, simultaneous reductions of soot and NOx were obtained by increasing EGR rate and retarding injection timing. By increasing injection pressure, NOx emissions were increased due to leaner and faster combustion with better air-fuel mixing. However, smoke emissions were significantly reduced with increased injection pressure.     

Assessing the impacts of driving environment on driving behavior patterns

Transportation - Considering the role of behavioral and environmental factors on road accidents and traffic intensities, the characterization of vehicle use and driver behavior opens new...     

Structural design considerations for ships operating in arctic regions北大核心CSCD

冰脊和冰山与极地船体发生碰撞将影响船体结构安全,并决定船体结构设计载荷。船体结构设计应遵循基于风险的设计原则,通常涉及以下极限状态设计准则:1)服务极限状态(SLS);2)最终极限状态(ULS);3)疲劳极限状态(FLS);4)事故极限状态(ALS)。最终极限状态和事故极限状态对应于发生概率极低的船与冰脊作用以及冰山撞击事件,旨在确保船体结构不会完全损毁。然而,对于较低概率水平的冰载荷分析,需进行较大数据量的工况分析,计算耗时无法承受。为此,引入环境等值轮廓方法,来大幅减少冰载荷分析所需工况数量,并给出设计工况最有可能的冰体参数组合方式。结合最终极限状态和事故极限状态,举例说明这一方法的运用方式。环境等值轮廓方法可为现有极地船舶船体结构设计方法提供有效补充。     

Book reviews

Practice, Politics and Policies—"The Politics of Transport”. By Enid Wistrich. (Harlow, Essex: Longman Group Limited, 1983.) [Pp. 185, with index.] £4·25.

Econometric Analysis and Railway Costing. By W. G. Waters, II and A. D. Woodland. (North Oxford Academic, 1984.) [Pp.132.] £12·95.     

A multi-criteria decision support methodology for implementing truck operation strategies

This study proposes a multi-criteria decision support methodology to enable the prioritization of potential alternative transportation system operations strategies and then demonstrates the effectiveness of the methodology using a case study involving truck operations. The primary feature of this methodology is its ability to help policymakers consider economic, public, and private sector standpoints simultaneously. The economic criterion is cost to the public sector where four criteria related to truck impacts on the transportation system are incorporated. These are traffic congestion, safety hazards, air pollution, and pavement damage. In addition, reliability and productivity are regarded as metrics representing the private sector viewpoint since they can significantly affect profitability. The methodology combines qualitative and quantitative aspects of these standpoints. In order to demonstrate the applicability of this methodology, a corridor with some of the highest truck traffic in the US is selected as a case study and three forms of left lane restrictions for trucks are considered. For qualitative analysis, survey data were collected from two groups classified as public agency and transportation industry professionals who are experts in trucking. In addition, a micro traffic simulation model was used to produce various performance measurements that can describe quantitative impacts. As a result, the methodology provides a rational argument for prioritizing potential alternative truck strategies.     

Research on the sound metric of door-slamming sound based on leaky integration and wavelet decomposition

The evaluation of the sound quality of door-slamming has become one of the important issues in vehicle noise, vibration and harshness (NVH) analysis. For the sound quality evaluation of door-slamming, a new sound metric, named as sound metric based on critical band wavelet decomposition (SMCBWD), is developed. In the new sound metric, the sound signals of door-slamming are sampled and the signal component of the door-slamming sound which has the great influence on the quality of door-slamming is extracted by using the leaky integration method. The extracted signal component is then decomposed by wavelets based on the critical bands and the coefficients of wavelet decomposition are calculated. Based on the energy of the frequency weighted wavelet decomposition coefficients, the new sound metric, SMCBWD, is calculated. In order to verify the effectiveness of SMCBWD, the correlation coefficients between the new sound metric and the subjective sound quality performance value of door-slamming, as well as between the traditional sound metrics (loudness, sharpness) and the subjective sound quality performance value of door-slamming have been calculated, respectively. The results show that the new sound metric developed in this paper has the higher correlations with the subjective sound quality performance value when compared with the traditional sound metric of loudness and sharpness. Thus, SMCBWD can be used to evaluate the sound quality of door-slamming more accurately.     

Development of the performance simulator for electric scooters with an in-wheel motor

Due to the increasing use of fossil fuel, carbon dioxide emission also increased and environmental problems have emerged as social issues. Accordingly, the research about electric vehicles as personal transportation has been actively performed. An electric scooter is not as complex as an automobile, but it takes a lot of time and costs to design and develop a new vehicle due to trial and error in selecting the specifications of core components according to consumer’s requirements. In this paper, a performance simulator for an electric scooter with an in-wheel motor at the rear wheel was developed and the simulation results were verified through experiments. For a longer travelling distance with the same energy source, the regenerative braking algorithm that converts kinetic energy into electric energy during braking was applied. The usefulness of the regenerative braking control algorithm was verified through various simulation results.     

Mesh generation and hysteretic loss prediction of 3-D periodic patterned tire

This paper is concerned with the numerical prediction of the hysteretic loss-induced rolling resistance of 3-D periodic patterned tire. Elastomeric rubber compounds of rolling tire exhibit the hysteretic loss owing to the phase difference between stress- and strain-time responses. By virtue of this physical characteristic, the rolling resistance is considered as a pseudo-force resisting the tire rolling. The 3-D periodic patterned tire model is constructed by copying an 1-sector mesh in the circumferential direction, and strain cycles of each strain component are approximated by 3-D static tire contact analysis. According to the principal value of half strain amplitudes, the hysteretic loss is calculated in terms of the amplitude of the maximum principal strain and the loss modulus of rubber compound. The numerical results of 3-D periodic patterned tire are justified with the experimental data and compared with those of 3-D smooth tire.     

Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 2

This paper presents a review of the characterization of physical properties, morphology, and nanostructure of particulate emissions from internal combustion engines. Because of their convenience and readiness of measurement, various on-line commercial instruments have been used to measure the mass, number, and size distribution of nano-particles from different engines. However, these on-line commercial instruments have inherent limitations in detailed analysis of chemical and physical properties, morphology, and nanostructure of engine soot agglomerates, information that is necessary to understand the soot formation process in engine combustion, soot particle behavior in after-treatment systems, and health impacts of the nano-particles. For these reasons, several measurement techniques used in the carbon research field, i.e., highresolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and Raman spectroscopy, were used for analysis of engine particulate matter (PM). This review covers a brief introduction of several measurement techniques and previous results from engine nano-particle characterization studies using those techniques.