Effect of fuel injection strategies on the combustion process in a PFI boosted SI engine

A low-cost solution based on fuel injection strategies was investigated to optimize the combustion process in a boosted port fuel injection spark ignition (PFI SI) engine. The goal was to reduce the fuel consumption and pollutant emissions while maintaining performance. The effect of fuel injection was analyzed for the closed and open valve conditions, and the multiple injection strategies (MIS) based on double and triple fuel injection in the open-valve condition. The tests were performed on an optical accessible single-cylinder PFI SI engine equipped with an external boost device. The engine was operated at full load and with a stoichiometric ratio equivalent to that of commercial gasolines. Optical techniques based on 2D-digital imaging were used to follow the flame propagation from the flame kernel to late combustion phase. In particular, the diffusion-controlled flames near the valves and cylinder walls, due to fuel deposition, were studied. In these conditions, the presence of soot was measured by two-color pyrometry, and correlated with engine parameters and exhaust emissions measured by conventional methods. The open valve fuel injection strategies demonstrated better combustion process efficiency than the closed ones. They provided very low soot levels in the combustion chamber and engine exhaust, and a reduction in specific fuel consumption. The multiple injection strategies proved to be the best solution in terms of performance, soot concentration, and fuel consumption.     

Design and evaluation of sideslip angle observer for vehicle stability control

This paper presents a method for estimating the vehicle side slip angle, which is considered as a significant signal in determining the vehicle stability region in vehicle stability control systems. The proposed method combines the model-based method and kinematics-based method. Side forces of the front and rear axles are provided as a weighted sum of directly calculated values from a lateral acceleration sensor and a yaw rate sensor and from a tire model according to the nonlinear factor, which is defined to identify the degree of nonlinearity of the vehicle state. Then, the side forces are fed to the extended Kalman filter, which is designed based on the single-track vehicle model associated with a tire model. The cornering stiffness identifier is introduced to compensate for tire force nonlinearities. A fuzzy-logic procedure is implemented to determine the nonlinear factor from the input variables: yaw rate deviation from the reference value and lateral acceleration. The proposed observer is compared with a model-based method and kinematics-based method. An 8 DOF vehicle model and Dugoff tire model are employed to simulate the vehicle state in MATLAB/SIMULINK. The simulation results shows that the proposed method is more accurate than the model-based method and kinematics-based method when the vehicle is subjected to severe maneuvers under different road conditions.     

Particle flux, and composition of sedimenting matter, in the Greenland Sea

Vertical flux of particulate material was recorded with moored sediment traps during 1988/1989 in the Greenland Sea at 72°N, 10°W. This region exhibits pronounced seasonal variability in ice cover. Annual fluxes at 500 m water depth were 22. 79, 8.55, 2.39, 3.81 and 0.51 g m⁻² for total flux (dry weight), carbonate particulate biogenic silicate, particulate organic carbon and nitrogen, respectively. Fluxes increased in April, maximum rates of all compounds occurred in May–June, and consistently high total flux rates of around 100 mg m⁻²d⁻¹ prevailed the summer. The increasing flux of biogenic particles measured in April is indicative of an early onset of algal growth in spring. Small pennate diatoms dominated in the trap collections during April, and were still numerous during the high flux period when Thalassiosira species were the most abundant diatoms. During May–June, up to 22% of the Thalassiosira cells collected were viable-looking cells. The faecal pellet flux increased after the May–June event. Therefore we conclude that the diatoms settled as phytodetritus, most likely in rapidly sinking aggregates. From seasonal nutrient profiles it is concluded that diatoms contribute 25% to new production during spring and 50% on an annual basis. More than 50% of newly produced silicate particles are dissolved above the 500 m horizon. High new production during spring does not lead to a pronounced sedimentation pulse of organic matter during spring but elevated vertical export is observed during the entire growth period.     

Transportation policy analysis with a geographic information system: The virtual network of freight transportation in Europe

This paper presents a multi-modal freight transportation model based on a digitized geographic network. A systematic analysis and decomposition of all the transport operations i.e. moving, loading and unloading, transshipping and transiting, leads to the development of a virtual network where each virtual link corresponds to a specific operation, and all transportation modes and means are inter-linked. Software, called NODUS, automatically generates the virtual network so that the model can be conveniently applied to large networks. The analytical structure of the links notation makes it easy to attach specific cost functions to each virtual link. The model is applied to the trans-European freight network of roads, railways and inland waterways for the transportation of wood. Cost functions are built up for each operation by each mode/means combination. A detailed point-to-point origin-destination matrix, calibrated on Eurostat statistics, is generated by a Monte-Carlo technique. Then, the total transportation cost is minimized with respect to the choices of routes, modes and means. This provides estimations of transportation services demands as well as modal splits, to the extent that the two hypotheses of demand based on generalized cost minimization and market contestability are accepted. A sensitivity analysis on the relative road cost is made, which provides measures of arc-elasticities.     

铌磷半钢在中磷铸铁闸瓦中应用的研究

本文通过对用铌磷半钢配制的中磷闸瓦的金相组织、力学性能、物理性能和摩擦-磨损特性的研究及其实际运行,证明:其质量指标和使用性能完全满足 TB1159-76标准,并超过普通中磷闸瓦的技术水平;可使中磷铸铁闸瓦的原材料成本降低10%左右.     

Maritime economics: Problems and challenges for the future

The light is always identical in its composition, but it falls on a great variety of objects, and by so falling is first revealed to us, not in its own form, for it is formless, but in theirs; in like manner, thought only appears in the objects it classifies.     

Systematic training for maritime transport managers

Providing effective training for managers in the maritime and ports sector in developing countries has proven to be a daunting task. Initial attempts by the United Nations Conference on Trade and Development (UNCTAD) in the 1970s led to the development of senior port manager residence courses in Sweden. However, Given the vast numbers of managers needing training a more eficient method was required. Using the systematic training techniques pioneered by the International Telecommunications Union, UNCTAD, in the 1980s initiated two parallel programme: Trainmer (Training development in Maritime Transport); and IPP (Improving Port Performance). Both of these programmes demonstrated considerable success in terms of the numbers of maritime and port managers receiving training opportunities. Increased cooperation amoungst international agencies providing training programmes should result in improved transport management training in the 1990s, lrading to increased efficiences in port and related transport systems.     

Gulf of Gdansk spring bloom physical, bio-optical, biological modelling and contact data assimilation

In this study we propose a model of phytoplankton population dynamics in the marine ecosystem, which includes physical, biological and bio-optical parts. As an example we simulate the abnormal 1993 Gulf of Gdansk spring bloom, when extremely high chlorophyll concentrations were observed. For the one-dimensional model we use two different methods of contact chlorophyll observation assimilation to fit a model of “in situ” data. The results are compared with two-dimensional ecosystem modelling based on a barotropic model of wind-driven circulation without assimilation.