Development of knowledge based body structure concept design model

The purpose of this study is to propose a concept design process for an automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 17 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a ‘What If Study’ technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and static stiffness, dynamic stiffness and crashworthiness were assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness and static/dynamic stiffness were improved compared to an existing body structure. In addition, the weight of the body structure was reduced. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.     

Occupant injury risk analysis at NASS/CDS database

Injury information for vehicle occupants from the body regions of the head, thorax, abdomen, and upper and lower extremities, due to the restraints and interior parts of the vehicle, were extracted from the 2009 ~ 2012 NASS/CDS database. For those cases with high occurrence frequency, a detailed and comprehensive data analysis was performed to find the relationship between the accident, occupant, vehicle, and injury data. A numerical frontal impact sled model with the Hybrid III dummy and the GHBMC human body model was constructed to simulate and identify those injury risks according to NASS/CDS. Among the 5,734 injuries to the aforementioned body regions from frontal crashes are, listed by frequency of occurrence, the lower extremity (27.8 %), upper extremity (21.3 %), thorax (15.1 %), face (10.9 %), spine (8.7 %), head (7.3 %), and abdomen (6.9 %). The main injury sources to the head were the windshield, side structure, and steering wheel. For the thorax and abdomen they were the seat belt and steering wheel. For the lower extremity it was the instrument panel. The main injury patterns for the head were the concussion and the contusion. For the thorax they were vessel laceration and lung contusion. For the abdomen they were laceration and contusion of the organs. For the lower extremity they were bone fracture and ligament rupture. The steering wheel and seat positions were main factors affecting head and thorax injury risks. From the sled impact simulation, high injury risks of the head and thorax were assessed respectively at conditions of steering column tilt down and rear most seat position, which correlated well with the findings from the NASS/CDS data analysis.     

彩色多普勒超声在动态监测移植肝及其并发症中的应用

目的探讨彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中的应用价值。方法回顾我中心107例原位肝移植术后应用彩色多普勒超声资料,汇总后行统计学分析。结果肝移植术后早期门脉流速较正常对照组升高,而肝动脉流速降低,后逐渐恢复正常。107例中发现肝动脉血栓形成2例(1.87%),肝动脉狭窄5例(4.67%),门脉血栓形成3例(2.80%),肿瘤复发7例(6.54%),诊断为急性排斥反应18例次(16.82%),慢性排斥反应10例次(9.34%),胸腔积液105例(98.13%),腹腔积液65例(60.74%),假性动脉瘤1例,胰漏1例,胆道感染4例(3.74%),胆道狭窄4例(3.74%),胆漏5例(4.67%),胆总管结石1例。结论彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中具有重要的临床意义。     

地铁列车逻辑控制电路安全服役技术应用研究

为克服传统地铁列车继电器控制电路高故障率和无记录功能等诸多缺陷,提出了基于新型二乘二取二技术的无触点逻辑控制方案.完成了系统架构设计包括热备冗余、网络通信、故障诊断、日志分析等功能.针对既有地铁列车进行了控制电路技术方案设计和施工改造,首先在分析原有控制回路原理的基础上,完成无触点逻辑控制单元替代继电器点位设计;然后综...     

钢桥面铺装环氧沥青粘结层施工质量控制

环氧沥青粘结层的施工质量直接影响到环氧沥青混凝土铺装层施工效果的好坏。文中结合后海大桥钢桥面铺装工程实际,对环氧沥青粘结层材料性质及粘结层的施工进行了研究,提出了环氧沥青粘结层施工中应注意的问题。     

集中排烟隧道近火源顶板热参数理论预测

由于集中排烟模式能较好地控制上下游烟气的扩散范围,故被广泛应用于长大隧道设计中。文章针对小尺度火灾,建立了集中排烟隧道火源热烟羽受限发展理论模型,与已有火灾实验结果进行对比,完成了理论模型的验证,预测了顶板下方最高烟气温升、偏移距离等热参数。预测结果表明:火灾强度一定时,烟气最大温升随等效风速增加而急剧下降,且火灾强度对烟气温升的影响也较为显著;当等效风速超过1.5 m/s时,最大温升变化趋缓直至恒定;等效风速较小时,羽流未发生明显偏移,随着等效风速进一步增大,偏移距离明显增大,其变化速率随火灾强度的增大而减小。经回归整理得到了顶板下方烟气最大温升、偏移距离的无量纲准则关联式。     

驾驶模拟器在自动驾驶系统中的应用研究

自动驾驶车辆在实际道路上行驶之前的测试阶段是一个至关重要的环节。一个低成本、高效率以及高精度测量的自动驾驶车辆的测试方式,对于自动驾驶车辆的开发具有重要意义。将驾驶模拟器运用到研究自动驾驶车辆测试已是近年来的一个研究热点。基于虚拟驾驶场景的自动驾驶车辆的检测,通过组合虚拟驾驶场景的背景车辆、行人、交通灯、建筑、指示标牌等元素,研究将驾驶模拟器与虚拟驾驶场景的联合应用来测试自动驾驶车辆。设计了典型的交通场景,通过自动驾驶车辆和背景车辆的实时交互,研究自动驾驶车辆的各项性能指标。研究结果表明:该驾驶模拟器可以高度拟合人类驾驶体验,驾驶员通过驾驶模拟器控制背景车辆能够很好的模拟现实中的驾驶行为,对自动驾驶车辆的仿真测试起到了促进作用。     

"盖挖法"在近接既有建筑物的大跨隧道施工中的应用

针对大跨隧道洞口段埋深浅、邻近既有建筑物的工程特点,在国内外研究成果的基础上,对近接施工影响程度及范围进行了分析,并对各施工方案进行详细比选.结果表明,"盖挖法"不但能克服传统方法带来的各种不利因素,而且能够确保隧道的施工进度和既有建筑物的安全,同时可减少对洞口生态环境的破坏,是最佳的近接施工方案.     

Physical environments influencing bicyclists’ perception of comfort on separated and on-street bicycle facilities

This study investigates the impacts of physical environments on bicyclists’ perceptions of comfort on separated and on-street bicycle facilities. Based on a field investigation conducted in Nanjing, China, we find that physical environmental factors significantly influencing bicyclists’ perception of comfort on the two types of facility. Cyclists’ comfort is mainly influenced by the road geometry and surrounding conditions on physically separated paths while they pay attention to the effective riding space and traffic situations on on-street bicycle lanes.     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.