静态爆破工艺在旧桥改造中的应用

阐述了静态爆破施工的作用机理和施工工艺,通过与常规爆破工艺相比较,论证了该工艺具有的造价低、无振动、无噪声、无粉尘、无飞石、无毒气污染等特点和其广泛的推广应用价值.     

TBM管片衬砌受力的有限元分析

讨论了隧道掘进机管片衬砌的受力和各种载荷的计算方法,利用有限元分析建立其力学模型,并通过计算,证明了管片衬砌的强度是足够的.     

城市高架桥之高独柱墩横向位移探讨

结合城市高架高独柱墩顶部发生横向位移这一现象,对高独柱墩顶部横向荷载产生的原因进行初步分析,并应用三维非线性屈曲分析,阐述组合荷载所引起的大变形及混凝土徐变效应与墩顶横向位移之间的关系,提出了设计、施工类似结构时应注意的事项。     

A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates

The present work investigates the compressive axial ultimate strength of fillet-welded steel-plated ship structures subjected to uniaxial compression, in which the residual stresses in the welded plates are calculated by a thermo-elasto-plastic finite element analysis that is used to fit an idealized model of residual stress distribution. The numerical results of ultimate strength based on the simplified model of residual stress show good agreement with those of various methods including the International Association of Classification Societies (IACS) Common Structural Rules (CSR), leading to the conclusion that the simplified model can be effectively used to represent the distribution of residual stresses in steel-plated structures in a wide range of engineering applications. It is concluded that the widths of the tension zones in the welded plates have a quasi-linear behavior with respect to the plate slenderness. The effect of residual stress on the axial strength of the stiffened plate is analyzed and discussed.     

基于FPGA的单端行波故障测距系统的设计与实现

针对现有的10 k V输电线单端行波故障测距理论,提出了一种基于Cyclone IV系列FPGA芯片EP4CE15F17C8N的软硬件实现方案。采用FPGA自顶向下模块化思想,设计了行波故障测距系统,采用AD7356进行高速数据采集,通过改进的凯伦鲍尔矩阵进行相模变换,用FIR滤波器IP核进行小波变换求模极大值,最后根据模极大值的极性选择测距公式计算故障距离。通过时序仿真和板级测试表明,该方案设计时序稳定,且定位精度高、实时性强。     

反激变换器电流连续和断续的比较研究

根据单端反激变换器的电路和工作波形,推导了其在输出电流连续和不连续情况的工作原理,并且给出了在MATLAB/Simulink中的正激变换器的仿真模型和仿真结果。通过对仿真结果的分析得出以下结论:其优点是电路所用元器件少,电路简洁。其缺点如下:输出功率较小,稳定性较差,以及开关应力大,电路能量损耗较大。     

新型光纤光栅测量法在系杆拱桥索力监测中的应用

为保证系杆拱桥的安全和正常工作,必须加强桥梁索力监测.由于光纤光栅的优越性,现已成为工程健康监测领域的研究热点,但现有方法尚未成熟,因此研究一种新型光纤光栅索力监测技术,即光纤光栅基座夹具测量法,并将此方法应用在新建的龙苴大桥索力实时监测中.监测结果表明:光纤光栅基座夹具测量法及实施方案的可行性和准确性,检测数据可靠.此方法既可监测实际张拉过程中索力,也可在张拉结束后进行索力持续监测,为系杆拱桥的安全监测起到重要的补充及改进作用.     

船舶柴油机调速器有限转角力矩电机优化控制

本文针对新型的船舶柴油机调速器有限转角力矩电机控制系统优化与稳定性问题,在Matlab/Simulink中基于电枢回路方程与力矩方程搭建有限转角力矩电机动态系统模型.通过数据拟合方法构建电机非线性模型,基于线性控制理论对串级PID控制系统进行稳定性分析,最后使用遗传算法对PID参数进行优化设计.研究成果可为该电机用于柴油机电子调速执行机构提供优化及控制参考.     

基于家庭属性差异的大学生出行方式选择行为研究

为剖析家庭属性差异对大学生出行方式选择行为的影响，基于非集计理论，构建家庭属性差异的大学生出行选择多元Logit 模型. 根据四川省2 571 份大学生出行行为调查问卷，运用SPSS 软件标定模型参数，获取影响大学生出行选择的主要家庭属性因素，并进行敏感性分析. 结果表明：家庭平均年收入、经济净流对大学生出行方式选择有显著的影响；以航空运输为参考，家庭平均年收入、经济净流对公路运输方式选择的影响大于铁路运输；“祖辈替孙辈购买机票”的折扣票务形式可提高大学生选择航空出行的概率.     

Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.