钙钛矿型La（0.3）Ca（0.7）FeO3的制备及其电化学性能

采用甘氨酸-硝酸盐燃烧法制备了钙钛矿型复合氧化物La0.3Ca0.7FeO3,并用X-射线衍射分析,扫描电镜,X-射线能谱仪对纳米晶体的晶型、晶粒大小、形貌及组成进行表征.用乙炔黑为载体制备功能氧电极,采用三电极体系,测试循环伏安曲线.结果表明：800℃焙烧2 h得到完整的晶体,晶体粒子大小均匀,粒径为17.9 nm,为菱形晶系;同时该氧电极具有明显的电催化特性.     

无线通信在港口起重机的应用现状及前景

无线通信越来越多地进入到自动控制领域。着重分析了目前港口机械中无线通信网络使用情况,并根据目前所流行的无线通信技术介绍了未来港口设备中无线网络的发展方向。     

利用闲置轮胎吊改造的车载堆煤皮带机

为解决汕头港煤堆场不足的问题,提出将轮胎吊改造成堆煤皮带机,与地面移动皮带机配套,就可将备用的堆煤场利用起来。介绍了该方案的设计、设备的选型,及其稳定性计算,指出该方案实施后,将大大提高堆场边角的利用率。     

连云港庙岭三期突堤砂被堤工程施工工艺

根据连云港庙岭三期的特殊情况,采用了砂被筑堤法。介绍了连云港庙岭三期突堤砂被堤工程的概况,从砂桩打设、吹填砂被模袋混凝土护坡等几个方面介绍了砂被堤施工的工艺流程。陈述了施工中出现的技术问题和解决方法以及对原施工工艺的改进。这一工艺取得了良好的施工效果。     

福建主要港口竞争力比较研究

福建港口资源丰富,但众多港口的潜力未得到充分的发挥,港口发展存在一定的滞后性。加快港口开发,提高港口核心竞争力成为当务之急。比较福建主要港口的竞争力,分析了港口-e．_N的优势差距,提出了提升福建港口综合竞争力的有效途径。     

玻璃钢模板在南京港龙潭港区四期水工码头Ⅱ标段中的应用

为提高施工效率和降低成本,在南京港龙湾港在四期水工码头Ⅱ标段引桥圆形立桩施工中,采用新型的平板玻璃钢模板,替代传统的钢模板或木模板施工方法。对玻璃钢板的制作和施工工艺进行详细的介绍。采用玻璃钢模板施工法浇注的圆柱,其光洁度完全达到清水混凝土的效果,并且工艺简单,节约成本,有重要现实意义。     

舰舰导弹对敌水面舰艇突防能力评估模型初探

舰舰导弹是对水面舰艇攻击的主要武器之一,导弹突防能力是评价导弹性能的重要指标.根据反导武器系统的特点,建立了单发和多发导弹对敌舰攻击的突防能力模型.     

Air pollution history elucidated from anthropogenic spherules and their magnetic signatures in marine sediments offshore of Southwestern Taiwan

Kaohsiung City and its neighborhood in the southwestern coastal plain of Taiwan have suffered serious air pollution since the region became the largest center for heavy-industry on the island. In order to unravel the air pollution history of the region, four ²¹⁰Pb- and ¹³⁷Cs-dated sediment box cores recovered in 2006 from offshore of this area were chosen for magnetic and petrographic analyses. The data were used to distinguish changes in concentration, composition and grain size of magnetic particles in the sediments due to inputs of anthropogenic magnetic spherules. Sedimentation rates have been reasonably constant for the last one hundred years, except at the core tops which were affected by a turbidite layer induced by a typhoon in 2005. Down-core profiles of mass-specific magnetic susceptibility (χ) and saturation isothermal remanent magnetization (SIRM) are similar among the cores, and reflect similar trends to magnetic spherule counts. This reveals that χ and SIRM of modern marine sediments can be used as air pollution indicators for nearby industrialized upwind areas. The studied record indicates that industrialization of the area was gradual during 1950–1980 and boomed afterward, resulting in a high production of airborne magnetic spherules, which is consistent with evidence for poor air quality at that time. Optical and scanning electron microscopic (SEM) surveys of magnetic extracts indicate that the magnetic spherules have grain sizes ranging from a few micrometers up to 50 μm and consist mainly of iron oxides with variable Si, Al, and Ca contents. X-ray diffraction analysis on magnetic extracts from different depths in the cores further indicates that magnetite and pyrrhotite, which are derived from terrigenous detritus, form the magnetic constituents of the sediments before the area was industrialized. In contrast, during the industrial boom, anthropogenic magnetite and hematite spherules became the dominant magnetic particles in the sediments. Down-core profiles of hard isothermal remanent magnetization (HIRM) below the turbidite layer also reveal similar trends to the corresponding magnetic spherule counts, which indicate that the concentration of hematite in the sediments is also closely related to the extent of air pollution. In addition, relatively low values of χ_ARM/χ, which are indicative of coarse magnetic grains, started to occur when large magnetite spherules became significant during the industrialized period. The air pollution history elucidated from our sediment core data not only reflects the development of Kaohsiung from a small village to a highly industrialized metropolitan area in the 20th century, but it is also consistent with the most recent air pollution trends revealed by real time air quality measurements of PM₁₀. Our results demonstrate the usefulness of magnetic parameters for delineating the air pollution history of coastal marine sediments down-wind of nearby industrialized regions.     

一种单缸护箱结构的集装箱散货装箱机

由于环保标准的提高,以及用户对一些货物破损率有较高要求,散货装集装箱运输方式的应用越来越多,比较典型的是块煤装集装箱运输。但是,这种运输方式在我国应用历史较短,散货装入集装箱比较困难。要充分发挥运力,降低成本,就必须将集装箱装满,而集装箱除底面外,侧面和上面均不能承受较大的力,如果要把集装箱倾斜过来装箱,就要解决箱体侧面受压的问题。     

波纹挡边带式卸船机装卸木薯干的取料头改造方案

结合木薯干的理化特性,重点阐述波纹挡边带式卸船机装卸木薯干时取料装置的几种改造方案。简要分析了不同方案的优缺点,并结合某港相关试验测试结果,给出波纹挡边带式卸船机装卸木薯干的方案选择。