2500吨级半舱甲板货船中剖面设计

本文通过对2500吨级半舱甲板货船四种中剖面结构形式的总纵强度进行计算比较分析，得出较优的中剖面形式是：采用下甲板与内舷板相连接在下甲板平面，内舷板下设甲板纵桁及支柱，其中剖面截面积较其他形式减少2．7％-3．6％，重量可降低，是值得进一步研究的半舱甲板货船船型结构方式，可供设计参考。     

起重机金属结构的计算载荷和载荷组合

介绍了起重机金属结构的设计中,要根据实际工况,合理地确定其所受的载荷及栽荷组合。     

抓住机遇开拓创新实现企业跨越式发展--日照港建筑安装工程有限公司总经理王成玉访谈录

<正>记者:王总经理,今年5月在杭州开会时听您介绍,贵公司在近几年实现了突破,很受鼓舞。首先想请您介绍一些这方面的情况。王总经理:日照港建筑安装工程公司始建于1985年5月。是以建筑施工为主业,兼营工程设计、房地产开发、建材加工等产业的大型建筑安装企业,具有建设部房屋建筑工程施工总承包一级资质、地基与基础工程专业承包二级、钢结构专业承包二级、以及铝钢塑门窗、防盗门制作安装、玻     

光纤光栅传感器在分布式测量系统中的应用

介绍了光纤光栅传感器在分布式测量系统中的应用，给出了光纤光栅测量节点的软硬件实现，并对实时性等影响分布式系统性能的因素做出了分析，最后，对于完善方案提出了构想。     

一种新型双模微带带通滤波器

在传统方形双模滤波器的基础上，提出了一种新的微带带通滤波器结构。该结构很好解决了传统滤波器的辐射损耗和体积大等问题。它可以应用到混合或单片微波集成电路中，更加有效地抑制高次谐波输出。利用上述结构仿真并设计了一个中心频率在1GHz，并能有效抑制高次谐波的带通滤波器，测试结果满足设计要求。     

用OCI实现通用动态数据库查询

主要讨论用OCI技术实现通用动态数据库查询。对实现通用数据库查询的关键技术进行研究。     

基于HLA的分布式作战仿真系统

介绍分布式作战仿真系统的开发，重点提出了基于HLA技术的系统体系结构，分析在创建系统时的关键技术。     

玉环市坎门街道临海道路方案比选研究

本文属于滨(临)海城市道路改扩建设计,从道路所属区域的路网结构、发展地位、服务功能、绿色环保、可持续发展、工程造价等方面进行方案比选,尤其项目位于山海交汇区域,路线方案选择可能为普通路段、隧道和入海桥梁的组合,并有文保、景观、土地开发的影响因素,颇具典型性。项目按路线介入大海的程度选择了三种方案,分别是基本不介入海的陆地方案、中等规模入海桥梁段方案和较大规模桥梁段方案,并在此基础上进行了综合比选,最终得到推荐方案结论。结论对今后类似滨(临)海道路设计项目有一定参考价值。     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.